HP認定プロフェッショナル.プログラムは、日本ヒューレット.パッカード株式会社のテクノロジやソリューションの専門技術を備えていることを証明するワールドワイドな認定制度です。HP0-A01
はHP認証の中で重要な科目である、該当アイクオリサートロジックHP0-A01模擬試験集は非常に理想的な試験に備えるツールと言えます。もし、HP0-A01模擬試験
を御利用頂くと、以前の過去試験問題とほぼ同じの現行問題をご体験できます。HP0-A01問題集
を使って、貴方のスキルも上がるできるし、たくさんの精力とお金も節約できるし、貴方にとって絶好なチャンスだよ、絶対逃さないでね
HP0-A01無料問題集を提供します
1.What does the linkloop command test?
A.router activity
B.Maximum Transmission Unit (MTU) size
C.MAC address connectivity between network cards
D.loopback address connectivity between network cards
Answer:C
2.Whichfile containsthe information sent in response to a bootp request?
A./etc/services
B./etc/bootptab
C./etc/inetd.conf
D./etc/bootp.conf
Answer:B
3.Which commands can confirm host name resolution (DNS/Bind) is working correctly?
A.whois
B.uname
C.nsquery
D.hostname
E.gethostbyname
Answer:C
4.What is IP multiplexing on a UNIX host?
A.increasing throughput on the network interface
B.binding the same IP address to multiple network interface
C.binding more than one IP address to a single network interface
D.binding more than one MAC address to a single network interface
Answer:C
5.Which tools have been deprecated with the introduction of the nwmgr command? (Select three.)
A.netstat
B.ifconfig
C.linkloop
D.lanscan
E.lanadmin
Answer:C D E
6.How can you enable only NFS version 4 support on HP-UX 11i v3?
A.HP-UX v3 does not support NFSv4.
B.Change the NFSv4 kernel parameter to yes, recompile the kernel and reboot.
C.Using only NFSv4 is not supported; NFSv2 and NFSv3 are always enabled.
D.Set the configuration parameters NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX to 4.
Answer:D
7.WhichNFSserver file containsa list of clientsthat currentlyhave the server'sNFSfile systemsmounted?
A./etc/fstab
B./etc/rmtab
C./etc/nfstab
D./etc/mnttab
E./etc/exports
Answer:B
8.What is the length of an IPv4 address?
A.32 bits
B.48 bits
C.64 bits
D.128 bits
Answer:A
9.What are themajor featuresof IPFilter onHP-UX 11i v3? (Select three.)
A.creates extensive logs
B.supports X.25 Interfaces
C.installed and enabled by default
D.provides a new GUI configuration tool
E.supports Network Address Translation (NAT)
Answer:A B E
HP0-J26無料問題集を提供します
1.To install additional switches, you must determine the ideal ISL ratio. Which ISL ratio range is
recommended for less I/O intensive application requirements (less than 70 MB/s at 2 Gb/s, less
than 140 MB/s at 4 Gb/s, less than 280 MB/s at 8 Gb/s)?
A.3:1 to 1:1
B.1:1 to 3:1
C.15:1 to 7:1
D.7:1 to 15:1
Answer:B
2.Which Fibre Channel timing variables must match in an interoperable fabric?
A.Timing variables do not need to match.
B.R_A_TOV, E_D_TOV and B_B_TOV
C.R_A_TOV and E_D_TOV
D.R_A_TOV and B_B_TOV
Answer:C
3.You are preparing an installation plan for implementing a new SAN design and want to ensure all
customer needs are included. Which data collection method requires that you create a process
list and review all relevant stakeholders?
A.Card Arrangement
B.Information Extraction
C.Brainstorming
D.Process Mapping
Answer:B
4.Which information should be included in the topology map documentation of a SAN design
provided to your support organization? (Select two.)
A.serial numbers of connected servers
B.SAN switch zoning configurations
C.storage controller operating mode parameters
D.IP addresses of the connected servers
E.World Wide Names of all nodes and devices
Answer:B C
5.You are implementing a SAN infrastructure including an HP StorageWorks EVA4400 at a
customer site. The customer is interested in using three-site cascaded replication functionality.
What should you recommend to accomplish this? (Select two).
A.HP StorageWorks FlexCopy
B.HP Continuous Access EVA
C.additional disks in the EVA
D.HP Virtual Replicator
E.HP Business Copy EVA
Answer:B E
6.Which HP tool provides the ability to create a Microsoft Visio diagram of a SAN topology for a
customer documentation?
A.SAN Health
B.SAN Designer
C.SAN Visibility
D.SAN Navigator
Answer:C
7.A single Fibre Channel router is implemented in an existing SAN. What can be accomplished?
A.fabric management service
B.fabric interconnection without merge
C.SAN availability improvement
D.SAN extension across long distances
Answer:B
8.Which features can affect performance in a SAN? (Select three.)
A.cable modes
B.number of ISLs
C.type of LC connector
D.storage array configuration
E.type and capacity of disks used
F.storage access restrictions
Answer:B D E
9.What has the most influence on the response time of a hard disk drive?
A.arbitration
B.host request
C.rotational delay
D.seek time
Answer:C
マイクロソフトでは、企業、学校、パソコンスクールなどを中心としたトレーニング プログラムを各種用意して、認定資格取得のために強力なサポートを行っています。70-673はその中で非常に重要的な科目で、70-673 認証を持つなら、全世界に共通した適切な判断基準で、技術力の評価を行うことができます。全世界共通の70-673 認定により、技術者の高い技術レベルが保証されます。70-673 認定取得により、ビジネスチャンスの場が大きく広がります。この70-673 認定を持って名刺等に認定ロゴを印刷することも可能です。でもどうやってこの70-673 認証書を手に入ります。KILLTEST今は対策を出します。この70-673模擬問題集精度が高くて一回で合格することを保証します。出ないと全額返済いたします。これから70-673無料問題集みんなと分かち合います
1. How many years of experience do you have designing, assessing, and optimizing Software Asset
Management (SAM)?
A. I have not done this yet.
B. Less than 3 months
C. 3-6 months
D. More than 6 months but less than 1 year
E. 1-2 years
F. 2-3 years
G. 3 or more years
Answer: A
2. Rate your level of proficiency with assessing SAM programs by using the SAM Optimization Model,
including defining scope, assessing SAM processes throughout an organization, assigning maturity levels
according to the 10 components of the SAM Optimization Model, and performing gap analysis between
current and desired maturity levels.
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A
3. Rate your level of proficiency with performing software license reviews, including conducting
inventories, validating and managing license entitlement records, and reconciling software inventories
and report license compliance status.
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A
4. Rate your level of proficiency with coordinating technologies, including managing data collection, data
interfaces between disparate data sources, and reporting.
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A
5. Rate your level of proficiency with designing, implementing, and managing a SAM program, including
securing executive sponsorship and funding.
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A
6. Rate your level of proficiency with managing the Software Asset life cycle, including acquisition,
deployment, maintenance, and retirement.
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A
7. Rate your level of proficiency with IT procurement, IT contract negotiations and management (i.e.
software licensing, terms and conditions), and IT operations (i.e. application package management,
network administration).
A. Very High
B. High
C. Moderate
D. Low
E. Very Low
Answer: A