HP認定プロフェッショナル.プログラムは、日本ヒューレット.パッカード株式会社のテクノロジやソリューションの専門技術を備えていることを証明するワールドワイドな認定制度です。HP0-J26
はHP認証の中で重要な科目である、該当アイクオリサートロジックHP0-J26模擬試験
集は非常に理想的な試験に備えるツールと言えます。もし、HP0-J26模擬試験を御利用頂くと、以前の過去試験問題とほぼ同じの現行問題をご体験できます。HP0-J26問題集
を使って、貴方のスキルも上がるできるし、たくさんの精力とお金も節約できるし、貴方にとって絶好なチャンスだよ、絶対逃さないでね
HP0-J26無料問題集を提供します
1.To install additional switches, you must determine the ideal ISL ratio. Which ISL ratio range is
recommended for less I/O intensive application requirements (less than 70 MB/s at 2 Gb/s, less
than 140 MB/s at 4 Gb/s, less than 280 MB/s at 8 Gb/s)?
A.3:1 to 1:1
B.1:1 to 3:1
C.15:1 to 7:1
D.7:1 to 15:1
Answer:B
2.Which Fibre Channel timing variables must match in an interoperable fabric?
A.Timing variables do not need to match.
B.R_A_TOV, E_D_TOV and B_B_TOV
C.R_A_TOV and E_D_TOV
D.R_A_TOV and B_B_TOV
Answer:C
3.You are preparing an installation plan for implementing a new SAN design and want to ensure all
customer needs are included. Which data collection method requires that you create a process
list and review all relevant stakeholders?
A.Card Arrangement
B.Information Extraction
C.Brainstorming
D.Process Mapping
Answer:B
4.Which information should be included in the topology map documentation of a SAN design
provided to your support organization? (Select two.)
A.serial numbers of connected servers
B.SAN switch zoning configurations
C.storage controller operating mode parameters
D.IP addresses of the connected servers
E.World Wide Names of all nodes and devices
Answer:B C
5.You are implementing a SAN infrastructure including an HP StorageWorks EVA4400 at a
customer site. The customer is interested in using three-site cascaded replication functionality.
What should you recommend to accomplish this? (Select two).
A.HP StorageWorks FlexCopy
B.HP Continuous Access EVA
C.additional disks in the EVA
D.HP Virtual Replicator
E.HP Business Copy EVA
Answer:B E
6.Which HP tool provides the ability to create a Microsoft Visio diagram of a SAN topology for a
customer documentation?
A.SAN Health
B.SAN Designer
C.SAN Visibility
D.SAN Navigator
Answer:C
7.A single Fibre Channel router is implemented in an existing SAN. What can be accomplished?
A.fabric management service
B.fabric interconnection without merge
C.SAN availability improvement
D.SAN extension across long distances
Answer:B
8.Which features can affect performance in a SAN? (Select three.)
A.cable modes
B.number of ISLs
C.type of LC connector
D.storage array configuration
E.type and capacity of disks used
F.storage access restrictions
Answer:B D E
9.What has the most influence on the response time of a hard disk drive?
A.arbitration
B.host request
C.rotational delay
D.seek time
Answer:C
HP0-J26無料問題集を提供します
1.To install additional switches, you must determine the ideal ISL ratio. Which ISL ratio range is
recommended for less I/O intensive application requirements (less than 70 MB/s at 2 Gb/s, less
than 140 MB/s at 4 Gb/s, less than 280 MB/s at 8 Gb/s)?
A.3:1 to 1:1
B.1:1 to 3:1
C.15:1 to 7:1
D.7:1 to 15:1
Answer:B
2.Which Fibre Channel timing variables must match in an interoperable fabric?
A.Timing variables do not need to match.
B.R_A_TOV, E_D_TOV and B_B_TOV
C.R_A_TOV and E_D_TOV
D.R_A_TOV and B_B_TOV
Answer:C
3.You are preparing an installation plan for implementing a new SAN design and want to ensure all
customer needs are included. Which data collection method requires that you create a process
list and review all relevant stakeholders?
A.Card Arrangement
B.Information Extraction
C.Brainstorming
D.Process Mapping
Answer:B
4.Which information should be included in the topology map documentation of a SAN design
provided to your support organization? (Select two.)
A.serial numbers of connected servers
B.SAN switch zoning configurations
C.storage controller operating mode parameters
D.IP addresses of the connected servers
E.World Wide Names of all nodes and devices
Answer:B C
5.You are implementing a SAN infrastructure including an HP StorageWorks EVA4400 at a
customer site. The customer is interested in using three-site cascaded replication functionality.
What should you recommend to accomplish this? (Select two).
A.HP StorageWorks FlexCopy
B.HP Continuous Access EVA
C.additional disks in the EVA
D.HP Virtual Replicator
E.HP Business Copy EVA
Answer:B E
6.Which HP tool provides the ability to create a Microsoft Visio diagram of a SAN topology for a
customer documentation?
A.SAN Health
B.SAN Designer
C.SAN Visibility
D.SAN Navigator
Answer:C
7.A single Fibre Channel router is implemented in an existing SAN. What can be accomplished?
A.fabric management service
B.fabric interconnection without merge
C.SAN availability improvement
D.SAN extension across long distances
Answer:B
8.Which features can affect performance in a SAN? (Select three.)
A.cable modes
B.number of ISLs
C.type of LC connector
D.storage array configuration
E.type and capacity of disks used
F.storage access restrictions
Answer:B D E
9.What has the most influence on the response time of a hard disk drive?
A.arbitration
B.host request
C.rotational delay
D.seek time
Answer:C