Remember that 20 kinds of PS technologya simple digital photo retouching 1 open late pictures, perform color like / saturation (-40) desaturated .2 a new layer, the layer mode to Soft Light, use the brush tool you will need to retouch part a few paintings, but also with convenient extract color palette 3 image color transition soft enough, then perform the following Gaussian blur filter at (+85) Simple handling photo came to light less than one open image, duplicate the background layer, the background layer mode to change the color gradation two pairs of background layer can be adjusted 30 seconds to get Plmm art as an Air Jordan 5 open image, duplicate the background layer twice two pairs duplicate the background layer a Gaussian blur (radius 4-6), copy the background layer II 3 mode to light a new layer, Tim Top Design Nike Air Force 1 Low Womens Red White Shoes filling 2015 Latest Nike Shoes pattern (pre-make half gray and half white striped pattern and defined above), set the blending mode to Multiply image displacement effect 1 Open the picture, a new layer Select View - Ruler, select the Move tool, drag from above and below, respectively, the two blue markings (9 segments) 2 utilizes rectangular selection tool, fill the box (1,9 dark gray, black 5,7, 3 bright gray) to store psd format, and then close the file 3 to Filter - distort - replacement, select just saved psd file notes ('Replacement filters' is to use the displacement map color values so that displaced constituency: white (tone value = 0) is the maximum negative displacement, will be processing the image pixels corresponding to the left and upward; black (tone value = 255) is the maximum positive displacement, that move up and down the corresponding pixel in the image to the right; gray (tone value = 128) is not displaced) Photo shading effect 1 Open the picture, Select - Select All, then Edit - Copy, build a new channel, Edit - Paste to copy the picture pasted into the new channel] 2 Executive image - adjustment - Anti-like, back to the RGB channels, Edit - Clear, delete the original image 3 Select - Load Selection, call the new channel, Executive Editor - Fill (the desired color) atomization an open image, New Layer 1, set the foreground / background color (black / white), to Filter - Render - Clouds, add a layer mask layer 2 is repeated Filter - Render - Clouds, Image - Adjustments - Brightness / Contrast (80,0, a layer mode to color) character illustration effect 1 Open the picture, duplicate the background layer, performing image - Adjustments - Channel Mixer (gray, + 30, + 60, + 10, monochrome), to Filter - Stylize - Find Edges, with Levels 2 to remove noise mixed mode to 'overlay', the Fill Opacity to add a Levels adjustment layer on the background layer 3 hit 50 percent, adjusted Output Levels ( 0, + 155) for performing image form, color ism 4 - Adjustments - Selective Color, fine-tuning of color (red, 0, + 100, + 100, -75; yellow, 0, -40, + 100, -40) use color overlay to add light and color old photo effect 1 Open the picture, duplicate the background layer, performing image - adjust - to color, adjust brightness / contrast (-42, + 18) 2 Add 'Color Overlay' layer style, blend modes to 'multiply', a little color, select the desired color (red), and then merge visible layers 3 to add filters - lens flare (brightness +100) 4 Duplicate the background layer, add again 'Color Overlay' layer styles, blending mode to 'multiply' (yellow) to add a blue sky picture 1 Open the picture and copy a 'background copy' .2 another new layer and fill the blue background .3 mixed mode to ' Multiply '4 on the background layer in the copy of a copy' 'to add on the top layer, and the mask 6 Select' Background copy 2 '5' background copy 2 Gradient tool ', from top to bottom Drag the mouse to select the blue sky into a hazy artistic process a photo 1. Copy the original layer (Ctrl + J) .2. to copy the layer using a Gaussian blur filter (+4.0) .3 make color adjustments ( + 50,0, -64) 4. wipe with a blurred edge eraser need clear part of .5 proper use layer blending mode to create a hazy bright (landscape, ecological type) 1 Open the picture, duplicate the layer .2 copy layer the layer mode to 'color' .3 Gaussian blur (+8.6 pixels) .L4 adjust color like / Saturation (Ctrl + U) (0, + 12,0) .5 add some sharpen, reduce transparency. to add a photo effect 1 Choose glass area, press Ctrl + J2 shear layer Gaussian blur (+3.1 pixels) .3 adjust the color balance (-39, + 29, + 16). 4. Select the new layer thickness regions were graded glass custom Tim Genuine Nike Air Force 1 High Womens White Gold Shoes filling (black and white gray, the order is dark, highlights, shadows, highlights), press Ctrl + T to adjust the thickness of the glass constituency .5 filters - twisted - glass, select your favorite pattern (twist, smoothness 1, Zoom 50%) the effect of burning paper old photographs - pure PS handle 1 open a picture, performing image - adjustments - hue / saturation (+1, -58, + 1) .2 image - adjustment - change (halftone, deepen yellow, deepening red highlight) .3 duplicate the background layer, go to Air Jordan 6 Filter - Texture - particles (9,56, vertical) .4 New a layer to Filter - Render - Clouds .5 then perform image - Adjustments - Brightness / Contrast (+ 27, + 100) .6 use the Magic Wand tool, select the layer a black constituency in Fig .7 Close Preview layer one, click Copy the background layer, change the foreground color dark brown .8 Select - Modify - Extended (5 pixels), choose - Feather (5 pixels) 9 Edit - Fill (foreground), the selected layer First, choose black magic wand selection with 10 off the background layer and layer a preview of the selected duplicate the background layer, Executive Editor - Clear .11 Image - canvas size, height / width was increased one centimeter, positioning (B). 12 Open preview background layer, the background layer selected, fill foreground color (light brown) .13 duplicate the background layer selected, choose Layer - Layer Style - Projection (positive end laminations, Opacity 45%, Angle 45, distance 7, 2% expansion, size 10) .14 The combined effect of all the layers mottled art frames Another Method 1 Create a file Press D 2 then fill the background is white, Filter - Render - Clouds .3 CTRL + M adjustment under the curve (black and white high contrast) .4 effect accomplish and then went after the filter - distort - Glass (7 twist, smoothness 3, Texture - canvas, zoom 50%) 6 Create a new layer, the background is black. another new layer, add a white rectangle filled .7 perform a filter on the layer rectangle where - distortion - replacement, select the default option, and then find the file you just saved PSD replacement can .PS atmosphere rendering your photos (View) 1 image - adjustment - Levels (RGB + 29,1.0, + 234) form, color ism l2wvg.V'T@4I2 execute the Hue / Saturation command (full -14 + 41, -1) .3 continue the hue / saturation (red, lower hue value, increasing saturation) .4 continue the hue / saturation (yellow, -22, + 45, -1) .www.swcool.commDZ-u5 proceed to Hue / saturation (green, + 15,0,0) .6 adjust brightness / contrast (brightness Decrease / increase contrast). form, Top Design Nike Air Force 1 Unisex Blue White Shoes color ism (H {T2P4ccN simple and easy to achieve the effect of an open sketch pictures, perform to color, adjust brightness / Contrast (decrease in brightness / contrast increase) .2 duplicate the background layer (Ctrl + J), select the background layer, go to Filter - Style - Find edge, then UXXXXX sharpening, and then the blending mode to Overlay .3 New a layer, filled with white, add noise, then motion blur, layer mode to Multiply .4 with an eraser tool (opacity to 15%), high light portion wipe Draw sketch effects of a stroke open a picture, duplicate the background layer, copy the layer 1 implementation of the filter selected - Blur - Gaussian Blur (2.0 pixels) 2 Duplicate the background layer again, select Duplicate the layer 2, the implementation of the filter - sketch - watercolor pen (20,60,80), the layer blending mode to darken again .3 Duplicate the background layer, select Duplicate Layer 3, the foreground color to red, to Filter - Drawings - note paper (25, 7,10), the opacity is set to 30% .4 Duplicate the background layer again, select the duplicate layer 4, the foreground color to black, foreground / background color to black / white, to Filter - Drawings - photocopies (1,50), and perform color adjustments (RGB, 157, .0,159), filling value of 30%. with a simple way to do a special photo 1 Open a picture .2 channel selected blue channel, then in blue color channels to Filter - stylized - overexposed, point back to the RGB channel to the Matrix effects 1. Create a new size of 500X300, RGB mode, white background with the text input file .2 tools are free to enter a channeling 01 code. and press CTRL + T to put it over the vertical rotation, and copy a few more pull into sizes, arbitrarily placed a few. Another method is the use of filters, you can achieve very good results. is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it .3 those 01 code all the text and background layers combined, and the foreground color to R: 100. , G: 255, B: 0 so green, background color to black .4 Select the menu - filters - neon light effects, light size is set to 10, and luminance was 15.5 select the menu - filters - stylized - photos. bright edge, the edge width is set to 1, brightness set to 20, the smoothness of about .6 to 1 Select the menu - Image - Adjustments - brightness / contrast, the brightness to -10, the contrast adjusted to about 60 Ps ' reverse negative impulse 'Portrait deal with one' reverse the negative rush 'is the film shooting in a special technique. is negative with the washing process to wash slides, which will be more strange and interesting colors. If In MM portrait photograph will make even filled with a decadent decadent avant-color image .1 open and let the right shows 'access panel' .2 choose the blue channel in the channel control panel to enter 'Image' menu , select the 'Apply Image', select the 'inverted' hybrid mode with 'Multiply' and opacity to 50%, confirmed .3 channel control panel selected the green channel, enter 'Image' menu, select 'Application image ', select the' inverted 'hybrid mode with' Multiply 'and opacity to 20%, confirmed .4 channel control panel choose red channel, enter' Image 'menu, choose' Apply Image ' Mixed mode with 'Color Burn' to confirm .5 in the channel control panel selected the blue channel, into the 'image' - 'adjustment' menu, select 'Levels' (or simply use the shortcut key 'Ctrl + L' tune out) in ' Input Levels 'three columns, enter: 25,0.75,150 confirm .6 channel control panel selected the green channel, into the' image '-' adjustment 'menu, select' Levels '(or simply use the shortcut key' Ctrl + L ' Recall.) in the 'Input Levels' three columns, enter: 40,1.20,220 confirm .7 channel control panel choose red channel, into the 'image' - 'adjustment' menu, select 'Levels' (or directly with shortcut 'Ctrl + L' tune out) in the 'Input Levels' three columns, enter: 50,1.30,255 confirm .8 Select All RGB channels in the channel control panel to enter 'Image' - 'adjustment' menu, select 'Brightness / Contrast 'to adjust the contrast brightness -5, contrast +20, confirm .9 Select All RGB channels in the channel control panel to enter' Image '-' adjustment 'menu, choose' Jordan Aero Mania hue / saturation '(or simply use the shortcut key' Ctrl + U 'Recall.) Adjust the saturation +15 confirm.