










ランボのV10をツインターボ化して搭載したAWDのボルボ240。
スウェーデンだからボルボらしい。
今回、ブースト制御が不安定で、トルクが上がったり下がったりしている。
その不安定な状態でも、自己ベストの8.5秒を出した模様。
形になったので、あとは、セットアップで詰めていく感じですね。
使用プラグは、NGKのイリジウムらしい。
@grind4speed
Stopping everything to watch the video
すべてを中断して動画を見る
Stopping everything to watch the video
すべてを中断して動画を見る
@Hertztorkenbob
Good to see waffles back on track👍🏻
Also the mirrored cockpit view made me realise that sparco backwards is ocraps 😂
ワッフルズがまた調子を取り戻したようで何より👍🏻
あと、コックピット視点を反転させて気づいたんだけど、「Sparco」を逆にすると「ocraps」になるんだね😂
Good to see waffles back on track👍🏻
Also the mirrored cockpit view made me realise that sparco backwards is ocraps 😂
ワッフルズがまた調子を取り戻したようで何より👍🏻
あと、コックピット視点を反転させて気づいたんだけど、「Sparco」を逆にすると「ocraps」になるんだね😂
@jebidiahcarlyon3543
I can't believe how easily it's pulling the front wheels off the ground. It looks like it tries to wheelie through the first 3 gears.
It's so cool to watch it take off
いとも簡単にフロントホイールが浮き上がるなんて、信じられない。最初の3速までずっとウィリーしようとしているみたいだ。
発進する様子を見るのは最高にカッコいい。
I can't believe how easily it's pulling the front wheels off the ground. It looks like it tries to wheelie through the first 3 gears.
It's so cool to watch it take off
いとも簡単にフロントホイールが浮き上がるなんて、信じられない。最初の3速までずっとウィリーしようとしているみたいだ。
発進する様子を見るのは最高にカッコいい。
@Lewis-kf2pj
Hello Peter! It’s aways a treat to see a new video drop. Hope you’re well, happy and healthy! I’d heartily recommend taking the beast to a dyno as in my case, because the staff knew the Motec system so well, (I am but a very enthusiastic amateur) using the things day in day out, they knew what to adjust/tweak to get the most out of the car without jeopardising the engine. They were just as enthusiastic as I was to be fair and helped a great deal. I’m sure you’re more skilled than I am with the things though so your mileage may vary, quite literally :D
ピーターさん、こんにちは!新しい動画が公開されると、いつもワクワクします。お元気で、幸せに過ごされていることを願っています!ぜひ、その「野獣(愛車)」をダイナモ(出力計測装置)にかけてみることを強くおすすめします。私の場合、ダイナモ施設のスタッフがMoTeC(モーテック)システムに非常に精通していて――私はただの熱心な素人に過ぎませんが――彼らは日常的にそのシステムを扱っているプロなので、エンジンを壊すことなく、車の性能を最大限に引き出すための調整や微調整を的確に行ってくれました。彼らも私と同じくらい熱心に取り組んでくれて、本当に助かりました。もっとも、ピーターさんは私よりもずっとこのシステムに詳しいはずですから、結果はまた違ってくるかもしれませんね(文字通りの意味で!):D
Hello Peter! It’s aways a treat to see a new video drop. Hope you’re well, happy and healthy! I’d heartily recommend taking the beast to a dyno as in my case, because the staff knew the Motec system so well, (I am but a very enthusiastic amateur) using the things day in day out, they knew what to adjust/tweak to get the most out of the car without jeopardising the engine. They were just as enthusiastic as I was to be fair and helped a great deal. I’m sure you’re more skilled than I am with the things though so your mileage may vary, quite literally :D
ピーターさん、こんにちは!新しい動画が公開されると、いつもワクワクします。お元気で、幸せに過ごされていることを願っています!ぜひ、その「野獣(愛車)」をダイナモ(出力計測装置)にかけてみることを強くおすすめします。私の場合、ダイナモ施設のスタッフがMoTeC(モーテック)システムに非常に精通していて――私はただの熱心な素人に過ぎませんが――彼らは日常的にそのシステムを扱っているプロなので、エンジンを壊すことなく、車の性能を最大限に引き出すための調整や微調整を的確に行ってくれました。彼らも私と同じくらい熱心に取り組んでくれて、本当に助かりました。もっとも、ピーターさんは私よりもずっとこのシステムに詳しいはずですから、結果はまた違ってくるかもしれませんね(文字通りの意味で!):D
@SC3487-z3k
Hi Peter. Congratulations! I've been following your build and development of your Volvo with interest. If you'd like some advice on tuning Motec may I suggest you contact Shane Tecklenburg. He used to work for Motec and now tunes cars full time. He was the tuner behind E Kanoo's record setting Supra years back. He currently tunes Big Mack an Australian drag car that is striving to be the world's fastest Nissan RB powered car. He's run 5.68@260mph so far and it's early in development. Shane has a YT channel called TunedbyShaneT. I'm looking forward to your next video.
ピーターさん、おめでとうございます!ボルボの製作・開発の様子をずっと興味深く拝見していました。もしMoTeC(モーテック)のセッティングについてアドバイスが必要であれば、シェーン・テッケンバーグ(Shane Tecklenburg)さんに連絡してみてはいかがでしょうか。彼は以前MoTeCに在籍しており、現在はプロのチューナーとして活動しています。かつて、E Kanoo(E・カヌー)がスープラで記録を打ち立てた際、そのチューニングを担当したのが彼です。現在は、日産RB型エンジン搭載車として世界最速を目指すオーストラリアのドラッグカー「Big Mack」のチューニングを手がけています。開発初期段階でありながら、すでに5.68秒(時速260マイル)というタイムを記録しています。シェーンさんは「TunedbyShaneT」というYouTubeチャンネルも運営されていますよ。次回の動画も楽しみにしています!
Hi Peter. Congratulations! I've been following your build and development of your Volvo with interest. If you'd like some advice on tuning Motec may I suggest you contact Shane Tecklenburg. He used to work for Motec and now tunes cars full time. He was the tuner behind E Kanoo's record setting Supra years back. He currently tunes Big Mack an Australian drag car that is striving to be the world's fastest Nissan RB powered car. He's run 5.68@260mph so far and it's early in development. Shane has a YT channel called TunedbyShaneT. I'm looking forward to your next video.
ピーターさん、おめでとうございます!ボルボの製作・開発の様子をずっと興味深く拝見していました。もしMoTeC(モーテック)のセッティングについてアドバイスが必要であれば、シェーン・テッケンバーグ(Shane Tecklenburg)さんに連絡してみてはいかがでしょうか。彼は以前MoTeCに在籍しており、現在はプロのチューナーとして活動しています。かつて、E Kanoo(E・カヌー)がスープラで記録を打ち立てた際、そのチューニングを担当したのが彼です。現在は、日産RB型エンジン搭載車として世界最速を目指すオーストラリアのドラッグカー「Big Mack」のチューニングを手がけています。開発初期段階でありながら、すでに5.68秒(時速260マイル)というタイムを記録しています。シェーンさんは「TunedbyShaneT」というYouTubeチャンネルも運営されていますよ。次回の動画も楽しみにしています!
このプロジェクトを支援したい方は、こちらからグッズをご購入ください:
https://busbil.com/en-jpy(オートダビング版)
Volvo 240 V10 AWD. How fast is it? First time on 1/4 Mile!
https://www.youtube.com/watch?v=85dUQiEJBJs

