XYC-WB-DC 5.8GHzドップラーレーダーセンサー6m~9m対応 Arduino | 秋葉は外神田ですがなにか?

秋葉は外神田ですがなにか?

ガッチャマン背景だったものを、映画不振とは関係なく、
ふつーのCoolTypeに変更しました。
少しは文字が読みやすくなったのではないでしょうか?
・・・と、思ったけど、やっぱりガッチャマンにもどしました。2013.10.15
※トップページ放置確認w2021.Aug

5.8GHZ Microwave Radar Sensor 6-9M Smart Trigger Switch Module 3.3-20V DC for Home Control

5.8 ghzのマイクロ波レーダーセンサー6-9メートルスマートトリガスイッチモジュール3.3-20ボルトdc用ホーム制御

 

Aliexpで、2018年1月13日に1.57ドルで2個購入

 

 

Features:

1. microwave sensors using planar antenna and receiving echo.

2. The switch is active sensors.

3. The sensors emit a high-frequency electromagnetic waves and receives their echo.

4. The sensors detect changes within echo.

5. The sensors detect tiny movement in detect range.

6. Send signal to MCU and execution instruction.

7. Signals are likely to be detected through the door, glass and thin walls.

8. It will get best probe result if person or object when moving toward the sensor.

9. This product is a strong anti-jamming capability, almost without wind, heat and other environmental factors foreign interference

 

 

Parameter:

 

 

1. working voltage: 3.3-20VDC;

2. standby quiescent current: <3mA;

3. transmit power: <2mW;

4. the working environment temperature: -20°~+80°;

5. Trigger: Repeat Trigger (default);

6. the output signal: TTL level; high->3.3V/Low->0V;

7. detection angle: 360°(spherical) no dead ends;

8. detection range: 6-9 meters (when ordering optional). The default setting 8 meters;

9. the working delay: 1 second to hundreds of seconds, the default setting 30S;

 

 

 

Usage notice:

 

1. It is better away from wall about 3-4 meter.against get sensor from another side of wall;

2. Open areas more responsive