Avaya認定資格を獲得するには就職のチャンスを増えて、貴方がAvaya領域でのレベルを証明する上に高給をもらえることが出来ます。KILLTESTの132-S-815問題集最近更新版が出ました。132-S-815はその中で非常に重要的な科目で、132-S-815
認証を持つなら、全世界に共通した適切な判断基準で、技術力の評価を行うことができます。全世界共通の132-S-815 認定により、技術者の高い技術レベルが保証されます。132-S-815 認定取得により、ビジネスチャンスの場が大きく広がります。この132-S-815 認定を持って名刺等に認定ロゴを印刷することも可能です。でもどうやってこの132-S-815認証書を手に入ります。KILLTEST今は対策を出します。この132-S-815模擬問題集精度が高くて一回で合格することを保証します。出ないと全額返済いたします。これから132-S-815無料問題集みんなと分かち合います
これから132-S-815問題集 皆と分かち合います
1 .Which three are manual steps required to upgrade Message Networking from Release 2.0 to
Release 3.1? (Choose three.)
A. Perform an attended system backup.
B. Run the pre-upgrade tool to help plan for the upgrade.
C. Remove the switch integration software from the MN 2.0 system.
D. Use the backup verification tool to ensure the quality of the backup.
E. Insert the MN 3.1 DVD and run Software Update on the 2.0 system.
Answer: A,B,D
2 .Which two options are presented after starting the Data Collection Tool (DCT)? (Choose two.)
A. create a new file
B. analyze existing system
C. deploy new configuration
D. delete current configuration
Answer: A,B
3.To conduct a multiple Avaya Message Application Server (MAS) installation, where in the Voice
Mail Domain must the Avaya Mailbox Monitor and the Message Waiting Indicator (MWI) services
be activated?
A. in the first MAS
B. in different MASs
C. on the same MAS
D. in at least two MASs
Answer: C
4 .According to Avaya documentation, which step must be taken to connect the cables supplied with
a digital set emulation board to the PBX?
A. Connect the board using the provided RJ-48C (Ethernet) cable.
B. Connect the installed boards to one end of a standard RJ-11 tip/ring cable.
C. Connect the board using the provided PBX station interface D/82JCT-U cable.
D. Connect the male end of the provided CT bus cable to the top of each port board.
Answer: C
5 .Before requesting a license for a newly installed Modular Messaging system, which information is
required from the on-site installer?
A. Voice Mail Domain Name
B. Voice Mail Domain Identifier (aka VMD ID or Host ID)
C. IP addresses of all servers in the Voice Mail Domain
D. Local Administration Account names and passwords for all Messaging Application Servers
(MASs)
Answer: B
6 .Before going to a customer site to begin installing a Modular Messaging R3.1 system, which three
items should be obtained from support.avaya.com? (Choose three.)
A. Configuration Notes
B. System planning form
C. Outlook Client software
D. Customer account information
E. Supplementary Server software
Answer: A,B,C
7 .Before beginning to configure and test the port boards in the Avaya Messaging Application Server
(MAS), a user must first obtain the proper configuration note for the particular PBX and integration.
Where can the proper configuration note be found?
A. Help screens
B. Installation Guide
C. MAS documentation CD
D. http:\\support.avaya.com
Answer: D
これから132-S-815問題集 皆と分かち合います
1 .Which three are manual steps required to upgrade Message Networking from Release 2.0 to
Release 3.1? (Choose three.)
A. Perform an attended system backup.
B. Run the pre-upgrade tool to help plan for the upgrade.
C. Remove the switch integration software from the MN 2.0 system.
D. Use the backup verification tool to ensure the quality of the backup.
E. Insert the MN 3.1 DVD and run Software Update on the 2.0 system.
Answer: A,B,D
2 .Which two options are presented after starting the Data Collection Tool (DCT)? (Choose two.)
A. create a new file
B. analyze existing system
C. deploy new configuration
D. delete current configuration
Answer: A,B
3.To conduct a multiple Avaya Message Application Server (MAS) installation, where in the Voice
Mail Domain must the Avaya Mailbox Monitor and the Message Waiting Indicator (MWI) services
be activated?
A. in the first MAS
B. in different MASs
C. on the same MAS
D. in at least two MASs
Answer: C
4 .According to Avaya documentation, which step must be taken to connect the cables supplied with
a digital set emulation board to the PBX?
A. Connect the board using the provided RJ-48C (Ethernet) cable.
B. Connect the installed boards to one end of a standard RJ-11 tip/ring cable.
C. Connect the board using the provided PBX station interface D/82JCT-U cable.
D. Connect the male end of the provided CT bus cable to the top of each port board.
Answer: C
5 .Before requesting a license for a newly installed Modular Messaging system, which information is
required from the on-site installer?
A. Voice Mail Domain Name
B. Voice Mail Domain Identifier (aka VMD ID or Host ID)
C. IP addresses of all servers in the Voice Mail Domain
D. Local Administration Account names and passwords for all Messaging Application Servers
(MASs)
Answer: B
6 .Before going to a customer site to begin installing a Modular Messaging R3.1 system, which three
items should be obtained from support.avaya.com? (Choose three.)
A. Configuration Notes
B. System planning form
C. Outlook Client software
D. Customer account information
E. Supplementary Server software
Answer: A,B,C
7 .Before beginning to configure and test the port boards in the Avaya Messaging Application Server
(MAS), a user must first obtain the proper configuration note for the particular PBX and integration.
Where can the proper configuration note be found?
A. Help screens
B. Installation Guide
C. MAS documentation CD
D. http:\\support.avaya.com
Answer: D