310-302試験
はSUN 会社に主催されて、高い権威が持っています。貴方がもし310-302
試験を通したら、もう先進的な技術を修得したことを表明します.でもどうやって310-083認証を獲得しますか、多くの人がこの問題に困っています、だって試験料が高くて、試験題も簡単ではないです。KILLTEST今は解決策を出します。310-302 問題集精度が高くて、皆さんが一回で試験を通すように助けます。もし試験で失敗したら、全額返済します
310-302無料 問題集みんなと分かち合います
1.Which file contains the MAC address to host name lookup table?
A./etc/ethers
B./etc/inet/ethers
C./etc/inet/inetd.conf
D./var/adm/net/config
Correct:A
2.You are creating a plan to increase network security. Which two network topologies and devices
should be phased out? (Choose two.)
A.bus
B.hub
C.VLAN
D.switch
E.bridge
Correct:A B
3.At which layer in the TCP/IP network model are decisions about routing between networks made?
A.Internet
B.Transport
C.Data Link
D.Application
Correct:A
4.A newly installed system is experiencing network performance problems. You suspect it may be
related to the duplex or speed settings on the hme0 interface. Which two commands check the
duplex and speed of the hme0 interface? (Choose two.)
A.netstat -I hme
B.netstat hme link_mode
C.ndd -get /dev/hme speed
D.ndd -get /dev/hme duplex
E.ndd -get /dev/hme link_mode
F.ndd -get /dev/hme link_speed
G.ndd -get /dev/hme link_status
Correct:E F
5.What are two advantages of using a layered networking model? (Choose two.)
A.Routing tables are simplified.
B.Network performance is improved.
C.The troubleshooting process is simplified.
D.Changing one layer does NOT require changes to the other layers.
E.Networking related code does NOT need to be recompiled for other systems.
Correct:C D
6.What is CSMA/CD?
A.Common Serial Multiple Access with Carrier Detection
B.Collision Sensing Multiple Access with Carrier Detection
C.Carrier Sensing Multiple Access with Collision Detection
D.Common Serial Multiple Access with Collision Detection
E.Carrier Serial Multiplexing Access with Carrier Detection
Correct:C
7.You need to display the Ethernet address of a system connected to a server you administer.
Which command displays all entries in the current ARP table?
A.arp -a
B.arp -list
C.netstat -av
D.ndd -get /dev/arp ethers
Correct:A
8.Given: host name IP address MAC address myhost 192.29.10.101 8:0:20:50:10:20 server1
192.29.10.20 8:0:20:75:6e:8f The workstation myhost reboots. It needs to mount a file system from
server1 on the local subnet. Which address is returned by server1 in the ARP reply?
A.192.29.10.255
B.8:0:20:ff:ff:ff
C.8:0:20:75:6e:8f
D.8:0:20:50:10:20
E.255.255.255.255
Correct:C
310-302無料 問題集みんなと分かち合います
1.Which file contains the MAC address to host name lookup table?
A./etc/ethers
B./etc/inet/ethers
C./etc/inet/inetd.conf
D./var/adm/net/config
Correct:A
2.You are creating a plan to increase network security. Which two network topologies and devices
should be phased out? (Choose two.)
A.bus
B.hub
C.VLAN
D.switch
E.bridge
Correct:A B
3.At which layer in the TCP/IP network model are decisions about routing between networks made?
A.Internet
B.Transport
C.Data Link
D.Application
Correct:A
4.A newly installed system is experiencing network performance problems. You suspect it may be
related to the duplex or speed settings on the hme0 interface. Which two commands check the
duplex and speed of the hme0 interface? (Choose two.)
A.netstat -I hme
B.netstat hme link_mode
C.ndd -get /dev/hme speed
D.ndd -get /dev/hme duplex
E.ndd -get /dev/hme link_mode
F.ndd -get /dev/hme link_speed
G.ndd -get /dev/hme link_status
Correct:E F
5.What are two advantages of using a layered networking model? (Choose two.)
A.Routing tables are simplified.
B.Network performance is improved.
C.The troubleshooting process is simplified.
D.Changing one layer does NOT require changes to the other layers.
E.Networking related code does NOT need to be recompiled for other systems.
Correct:C D
6.What is CSMA/CD?
A.Common Serial Multiple Access with Carrier Detection
B.Collision Sensing Multiple Access with Carrier Detection
C.Carrier Sensing Multiple Access with Collision Detection
D.Common Serial Multiple Access with Collision Detection
E.Carrier Serial Multiplexing Access with Carrier Detection
Correct:C
7.You need to display the Ethernet address of a system connected to a server you administer.
Which command displays all entries in the current ARP table?
A.arp -a
B.arp -list
C.netstat -av
D.ndd -get /dev/arp ethers
Correct:A
8.Given: host name IP address MAC address myhost 192.29.10.101 8:0:20:50:10:20 server1
192.29.10.20 8:0:20:75:6e:8f The workstation myhost reboots. It needs to mount a file system from
server1 on the local subnet. Which address is returned by server1 in the ARP reply?
A.192.29.10.255
B.8:0:20:ff:ff:ff
C.8:0:20:75:6e:8f
D.8:0:20:50:10:20
E.255.255.255.255
Correct:C