[Solved] Can't Access the Internet Even After Nighthawk Router Setup
So, you are done with the Netgear Nighthawk WiFi router setup! But what's that? You are still seeing a yellow sign on the WiFi icon! Argh! You just can't access the internet! Yeah, it's too frustrating. But you don't need to stick with this error anymore! Cheers, we are here to help you out. This helpful guide will walk you through various troubleshooting tips to get the WiFi connectivity issues with your Nighthawk router resolved on your own. Read on.
Can't Access the Internet After Netgear Router Setup?
Are All Devices on Your Network Not Connecting to the Internet?
NO: Check if your device is connected to WiFi or via Ethernet. If it is connected via WiFi, make sure that you are connecting to the correct SSID of your router. After the Nighthawk router setup, the existing SSID of your network can be changed to something else depending on the model number of your router. For instance, if you own a Nighthawk R7000 router, then the changed SSID may contain 'Netgear' word. Or else, you can check the Netgear nighthawk R7000 manual to find the default SSID.
On the other hand, in case of the Ethernet cable connection, be certain that your device is receiving a proper internal IP address from your Netgear WiFi router.
YES: Make sure that the Ethernet cable is correctly connected between your modem and the Nighthawk router.
Is Your Device Getting a Valid IP Address for Your Router?
NO: Reset your Netgear WiFi router to the default factory settings. In order to perform the Nighthawk router reset, find the Reset button and press it using a paper clip or pin-like device.
YES: Try to access the default Nighthawk router setup web page and update your router's firmware. Open an internet browser and type www.routerlogin.net in the URL bar.
You will be landed on the Netgear Nighthawk WiFi router login page. After logging in, click on the Router Update button. Next, hit the Check option. The router will look for the new firmware update. If available, it shows a message asking you to download and install it. Click on the Yes button to update your Nighthawk router's firmware.
Are You Able to Log Into Routerlogin.net and Update Firmware?
NO: If you are still unable to access the internet, chances are that wireless interference is the culprit. You can change the wireless channel of your Nighthawk router to avoid wireless interference. Choose either a higher or lower channel to enhance the reliability and performance of your home wireless network. For this purpose, open an internet browser on your computer and access the default Nighthawk login web page.
When prompted, enter the password and click on Log In button. Find the wireless channel section and choose your preferred wireless channel. It is recommended you to consider non-overlapping channels. Finally, save the settings by clicking on Apply button. You can also use the Netgear Nighthawk app to change the WiFi channel of your wireless router.
Quick Tip: To make sure that the issue is related to the wireless connectivity, try connecting your PC to other wireless networks such as a coffee shop or neighbors’ network.
YES: Try accessing the internet on your device. If the internet is working on your device, then congrats! The issue has been resolved.
Can You Now Access the Internet on Your Device?
NO: It seems that your issue requires further investigation. In such a case, it is recommended to take experts' help.
YES: Congrats! The issue has been resolved now!