The application of optical components is very common in our daily life. However,they are very delicate so it is not that easy to clean optical components! Moreover,extra efforts are put to clean and handle plastic optical components. But if you handle optical product with care, they are going to give you service for a lifetime. Usually, optics gets contaminated by things like skin oil and dust. Here is some detailed information.
If
you don't clean your optics properly, chances are the contaminants will
remain on the surface of your visual component and they will absorb
incident radiation and can create hotspots on the optical surface. These
hotspots can permanently damage your optic. You can use different
methods to clean this. However, you must choose the right cleaning
option. There is a limitation to the extent you can use a cleaning
method. Due to variation in material and size not every cleaning
procedure is right for cleaning your product. You must take utmost
caution and verify the right handling process with your optical
manufacturer to keep the component in best working condition.
From
the time you unpack your optic, if you start using the right cleaning
method, you unknowingly increase durability of the product! You must
always unpack any optical component in a pollution-free environment. You
should never touch an optic with bare hands. It is because our hands
contain dust, dirt, etc. and if you don't wash your hands before
touching, you transfer the dirt to the same causing lifelong damage to
it. You should use gloves or optical tweezers to handle that to prevent
contamination of any kind. Also, try to always hold your optical product
along the non-optical surface to avoid damaging the optical surface.
After
optical manufacturing and after you receive the final product, the next
big thing is to inspect the optic before using the same. Contaminants
are sometimes hardly visible to the naked eyes (they are that tiny in
size). So, you should use a magnifying glass to check the visual
component. You can also use a bright light on the optical surface to
easily detect any contaminants on the surface. You should keep the
lenses perpendicular to your view to see any contaminants.
From
the above listed in this article, there are several various cleaning
methods for optics. However, choosing and analyzing the righ method for a
particular optical component is necessary and vital. For instance, the
best thing to do is immediately call the optic manufacturing company if
you are not sure how to clean 3D printed optic. However, don't use your
mouth; instead use either a blower bulb or an inert dusting gas
container. Here is another thing you should know is you must not keep
the optic immersed in water for long; rinse quickly and dry the same. If
you want to know more information about the infrared optical
products,please visit kmynge.