I have just discovered an amazing new service that I never knew existed, and I have to share it. It's a power tool battery rebuilding service. Now as an avid handyman, I use many different tools and I'm always amazed at the price of replacing one of those batteries. I've paid as much as $90.00 to replace a dead Nickel Cadmium battery for a tool that cost $160. At over 50% of the cost of replacing the tool, I was excited to hear that there are companies that will rebuild your existing Ni-Cad battery for around half the cost of replacement. What makes this even better is that the battery is rebuilt with better cells than the original, making it more powerful and longer lasting. Here's how it works.
There are some limitation to this type of service, but generally speaking, if your power tool battery is screwed together (which is almost all of them), it can be rebuilt. The process certainly seems simple enough. They pull the battery apart, pull out the cells, put in new cells, and put it back together. Now before you get any ideas, doing it correctly requires a $10,000 welder so it isn't really a do-it-yourself project. When it's all said and done, you have a power tool battery that works even better than the original!
There are several advantages to using a battery rebuild service, the most obvious of which is the direct cost savings over battery replacement. As previously mentioned, the savings is around 50 percent, which is significant considering these batteries can top the $100 dollar mark in many cases. Another big advantage to this service is that it is environmentally friendly to rebuild these batteries. Batteries make up a huge percentage of our gross waste and it's not too healthy for the environment. Rebuilding power tool batteries cuts down this waste immensely, while allowing you to continue using that favorite tool.
.
Related reading:Power tool Batteries Tungsten fresnel twist usb sticks sit on top kayak
There are some limitation to this type of service, but generally speaking, if your power tool battery is screwed together (which is almost all of them), it can be rebuilt. The process certainly seems simple enough. They pull the battery apart, pull out the cells, put in new cells, and put it back together. Now before you get any ideas, doing it correctly requires a $10,000 welder so it isn't really a do-it-yourself project. When it's all said and done, you have a power tool battery that works even better than the original!
There are several advantages to using a battery rebuild service, the most obvious of which is the direct cost savings over battery replacement. As previously mentioned, the savings is around 50 percent, which is significant considering these batteries can top the $100 dollar mark in many cases. Another big advantage to this service is that it is environmentally friendly to rebuild these batteries. Batteries make up a huge percentage of our gross waste and it's not too healthy for the environment. Rebuilding power tool batteries cuts down this waste immensely, while allowing you to continue using that favorite tool.
.
Related reading:Power tool Batteries Tungsten fresnel twist usb sticks sit on top kayak