Welcome to a Battery specialist of theAnritsu Battery
Test and measurement vendor Anritsu Co. has introduced the MT1100A Network Master Flex, which it says is a cost-effective, easy-to-use, full-function multi-protocol transport tester.
Combining light weight and portability with high performance – including support up to 400 Gbps (4x100G) – the MT1100A Network Master Flex is equally adept in the field during installation and maintenance of fiber-optic networks as it is in the R&D lab and on the manufacturing floor to test transport equipment, the company claims.
The modular MT1100A Network Master Flex supports bit rates from 1.5 Mbps to 100 Gbps and can be configured to meet current test requirements with a cost-effective upgrade path as measurement needs change. The platform supports testing of emerging Optical with battery like Anritsu S312D Battery , Anritsu S331C Battery , Anritsu S332C Battery , Anritsu S325D Battery , Anritsu S412D Battery , Anritsu S810C Battery , Anritsu S810D Battery , Anritsu S820B Battery , Anritsu S820C Battery , Anritsu MS2711B Battery , Anritsu MS2711D Battery , Anritsu MT8212B Battery Transport Network (OTN) infrastructure, including ODU0, ODU2e, ODU4 and ODUflex, as well as legacy Ethernet, Fibre Channel, SDH/SONET, and PDH/DSn systems. A wide variety of interfaces are supported without the need to reconfigure modules for added flexibility and time and cost efficiencies.
Three dual-port modules are compatible with the MT1100A platform. The MU110010A is a multi-rate module for up to 2x10G ports, the MU110011A supports 10M to 100G, and the 40/100G MU110012A module supports CFP2/CXP optical transceivers for 2x100G ports. Up to two modules can be configured in a single MT1100A mainframe, enabling the tester to accommodate as many as four fully independent ports at all rates, including 100G. This makes the MT1100A the first instrument in its category to support testing of 400G client signals currently under development, Anritsu asserts.
Test and measurement vendor Anritsu Co. has introduced the MT1100A Network Master Flex, which it says is a cost-effective, easy-to-use, full-function multi-protocol transport tester.
Combining light weight and portability with high performance – including support up to 400 Gbps (4x100G) – the MT1100A Network Master Flex is equally adept in the field during installation and maintenance of fiber-optic networks as it is in the R&D lab and on the manufacturing floor to test transport equipment, the company claims.
The modular MT1100A Network Master Flex supports bit rates from 1.5 Mbps to 100 Gbps and can be configured to meet current test requirements with a cost-effective upgrade path as measurement needs change. The platform supports testing of emerging Optical Transport Network (OTN) infrastructure, including ODU0, ODU2e, ODU4 and ODUflex, as well as legacy Ethernet, Fibre Channel, SDH/SONET, and PDH/DSn systems. A wide variety of interfaces are supported without the need to reconfigure modules for added flexibility and time and cost efficiencies.
Three dual-port modules are compatible with the MT1100A platform. The MU110010A is a multi-rate module for up to 2x10G ports, the MU110011A supports 10M to 100G, and the 40/100G MU110012A module supports CFP2/CXP optical transceivers for 2x100G ports. Up to two modules can be configured in a single MT1100A mainframe, enabling the tester to accommodate as many as four fully independent ports at all rates, including 100G. This makes the MT1100A the first instrument in its category to support testing of 400G client signals currently under development, Anritsu asserts.