The rate of the biomass pellet assembly line is identified by the resources made use of. For example, if the raw materials are branches and also trunks with high dampness material, they should be cracked - smashed - dried - granulated - stuffed - shipped. It mostly depends upon what resources are made use of. 350 type biomass pellet maker equipment 38,000, version: 350 type 300 ~ 500 kg per hour, 450 type 500 ~ 800 kg, 560 type 1 ~ 1.5 loads, 600 type 2 tons, 850 kind 3 ~ 4 lots.
The good marketing in Indonesia biomass pellet production line cost relies on your resources as well as result dimension. Firstly, you need to know what your resources are. The raw materials are prefabricated sawdust or wood chips as well as the moisture content of the products is 10%-15%. A manufacturing facility supplied new innovation wood pellet maker is enough. If your basic materials are unprocessed logs, branches, etc require to be shattered by a timber chipper as well as biomass crusher, after that dried in a dryer (if the moisture surpasses 15%, it needs to be dried), then the main device is granulated, and after that the packaging equipment packs this set of assembly line.
Understanding your basic materials has to do with the outcome. The output of the biomass pellet mill equipment is various as well as the version is different, so the cost is also different. The biomass pellet production line cost is not only a matter of reporting a number, but it is required to formulate a plan and quote according to your needs.
Related post: biomass pellet production line
Firstly, the raw product moisture requirements of timber pellets are really stringent. The wetness material of the material is expensive, which obstructs the die openings, so that the bits can not be produced; if the wetness web content of the product is also low, if it is too completely dry, it is challenging to develop, and the viscosity is insufficient.
Usually 12%-13%, 15-20% of the raw material wetness after modulation is the criterion for pushing timber pellets. If the raw material wetness is too expensive, the mold and mildew resistance as well as slipping phenomenon will certainly occur after the raw product enters the biomass pelletizer ring die; focus on control the wetness material of the raw material prior to going into the biomass pelleting machine, If the water material is too high, there will certainly be slippage in the ring die, leading to the sensation that it is hard to discharge.
Related post: RICHI biomass pellet mill
If your basic material wetness meets the needs, a biomass wood pellet press equipment can create wood pellets. If it does not meet the needs, it requires to be dried out, so it requires to be furnished with a wood clothes dryer as well as a hot blast range. Naturally this is if your raw material is wood chips. If your basic material is timber chips ( density less than 0.5 mm), it needs to be pulverized, which is equivalent to including another procedure. Some clients' basic materials are bark, which is additionally feasible after adding a wood pulverizer.
Related post: 5T/H wood pellet factory in Austria
However, some customers' basic materials are wood scraps, since the rate of timber scraps is cheap and also very easy to get, so there are numerous situations, after that it is necessary to add a timber chipper, first to reduce the non-standard wood scraps into timber chips, and then most likely to squash.
For some customers whose resources are waste building themes, it is necessary to alter the wood chipper to a bamboo plywood crusher.
Since the bamboo plywood itself has many iron nails, it is really simple to harm the blade on the wood chipper when making use of a wood chipper. One more reason is that the waste structure design template is relatively wide, and also the feed port of the wood chipper is normally 1250px.
Related post:
It is difficult to by hand damage it ahead of time, right? The bamboo plywood crusher can enter any kind of bamboo plywood with a feed opening of less than 1.25 m, as well as the gnawing knife of the bamboo plywood crusher is an ingot blade, and the iron nails have little impact on him.
Unlike wood chippers, the blades are quickly damaged. Bamboo plywood is also an advantage of making wood pellets. Usually, its moisture content is very tiny, in between 15-20%. As a result, using bamboo plywood as pellets conserves the problem of wood drying out devices.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com