Click "CorePlus"
Burn the .iso to a blank CD
To format HP compaq nx9040, use a "dban-2.3.0_i586.iso" CD.
Install the dbanCD in the drive tray, boot the computer, and press "F10" to enter the BIOS.
Advanced > Boot Order > put "!" in front of "Floppy Diskette Drive", "Hard Drive", and "Network Adaptor",
so they will be enabled and it will boot from the dbanCD ("ATAPI CD-ROM Drive").
On the "Darik's Boot and Nuke" screen, choose "Enter autonuke ....".
Enter > [wipe] > F10 to start.
It took more than 2 hours to delete all data.
Shut down the computer, and remove the dbanCD.
CorePlus installation:
Before the installation, reset BIOS to default settings so it can boot from HDD too.
Insert the CorePlusCD in the tray, and
select "Boot CorePlus with default FLWM top side".
2. /mnt/sr0/boot/core.gz
5. Checked "Wifi Support", "Wireless Firmware",
"Installer Application", "Remaster Tool", "Non-US keyboard layout support".
After the installation has completed, remove the CD and reboot.
If you shut it down before removing it, CorePlus wouldn't be saved on HDD.
