Pass4Testは正確な選択を与えて、君の悩みを減らして、もし早くてHP HP0-S17認証をとりたければ、早くてPass4Testをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、Pass4Testからすぐにあなたの通行証をとります。
Pass4Testはその近道を提供し、君の多くの時間と労力も節約します。Pass4TestはHPのHP0-S17認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。
試験番号：HP0-S17問題集
試験科目：HP 「Integrating and Managing HP BladeSystem in the Enterprise」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2013-09-09
問題と解答：全130問
君はまずネットで無料な部分のHP認証試験をダウンロードして現場の試験の雰囲気を感じて試験に上手になりますよ。HPのHP0-S17認証試験に失敗したら弊社は全額で返金するのを保証いたします。
HPのHP0-S17認定試験に受かりたいのなら、適切なトレーニングツールを選択する必要があります。HPのHP0-S17認定試験に関する研究資料が重要な一部です。我々Pass4TestはHPのHP0-S17認定試験に対する効果的な資料を提供できます。Pass4TestのIT専門家は全員が実力と豊富な経験を持っているのですから、彼らが研究した材料は実際の試験問題と殆ど同じです。Pass4Testは特別に受験生に便宜を提供するためのサイトで、受験生が首尾よく試験に合格することを助けられます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HP0-S17.html
NO.1 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.service planning interview
B.network device configuration
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB
HP問題集 HP0-S17過去問 HP0-S17 HP0-S17
NO.2 Which industry standard technologies are compatible with the SB600c AiO Storage Blade? (Select
two.)
A.ATA
B.SAS
C.SCSI
D.iSCSI
E.SATA
ANSWER: BD
HP認定試験 HP0-S17 HP0-S17参考書
NO.3 Which devices can be assigned an IP address through Enclosure Bay IP Addressing (EBIPA) for
c-Class server blades? (Select two.)
A.iLO 2 cards
B.interconnects
C.Insight Display
D.LAN interfaces of mezzanine cards
E.iSCSI target IP address on server blades
ANSWER: AB
HP HP0-S17認定試験 HP0-S17認定資格 HP0-S17認定証
NO.4 An administrator needs to monitor performance of every drive connected to the Smart Array controller.
Each drive is configured as a single logical drive.
Which tool can be used?
A.Insight Diagnostic
B.Radia Performance Manager
C.Performance Management Pack
D.Windows Server Performance Monitor
ANSWER: C
HP問題集 HP0-S17 HP0-S17過去問 HP0-S17認定試験 HP0-S17問題集
NO.5 A customer is looking for a virtualization solution for their data center. Their main area of concern is
server down time.
You have identified the x86-based virtualization candidates. Which platform best suits the customer's
needs?
A.scale-up
B.scale-out
C.Integrity VSE
D.single server virtual consolidation
ANSWER: B
HP HP0-S17認定証 HP0-S17認定試験
NO.6 Which industry standard protocols are used by HP SIM? (Select two.)
A.XML
B.TFTP
C.iSCSI
D.WBEM
E.NetBEUI
ANSWER: AD
HP練習問題 HP0-S17 HP0-S17認定資格 HP0-S17 HP0-S17参考書
NO.7 A BladeSystem enclosure is managed by one Onboard Administrator that failed. Which functionality is
still available? (Select two.)
A.iLO 2 is accessible.
B.All fans are up and running.
C.Server blades can access the SAN.
D.New server blades can be added and powered up.
E.New interconnect devices can be added and powered up.
ANSWER: BC
HP参考書 HP0-S17 HP0-S17 HP0-S17問題集
NO.8 You are administrating several c-Class enclosures and are looking for a unified authentication system
for all iLO cards and Onboard Administrator modules.
What is the proper solution?
A.HP Protect Tools
B.Credential Manager
C.Virtual Connect Enterprise Manager
D.Lightweight Directory Access Protocol (LDAP)
ANSWER: D
HP問題集 HP0-S17過去問 HP0-S17認証試験 HP0-S17過去問
NO.9 Which management suite delivers core management functionality for the HP BladeSystem solution,
including server deployment, health monitoring, performance monitoring, vulnerability scanning and patch
management?
A.HP Storage Essentials
B.HP Operations Software
C.Insight Control Environment
D.HP Systems Insight Manager
ANSWER: C
HP過去問 HP0-S17認定資格 HP0-S17認証試験
NO.10 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.verification of operation
B.confirmation of software revisions
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB
HP認定証 HP0-S17過去問 HP0-S17認証試験
NO.11 Which interconnect module offered by HP has the capability of assigning a configuration profile to a
specific server blade?
A.GbE2c Switch
B.Cisco 3020 Switch
C.Virtual Connect Ethernet
D.Ethernet Pass-Thru Module
ANSWER: C
HP HP0-S17過去問 HP0-S17認定証
NO.12 What is the purpose of the HP StorageWorks SB40c Storage Blade?
A.provides a blade form factor tape solution for any server supporting the TCP/IP protocol
B.provides a blade form factor networked shared storage for any server supporting IP-based storage
(iSCSI)
C.provides additional storage capabilities dedicated to a single server blade within the same c7000
Enclosure
D.provides additional storage capabilities dedicated to a single server blade in another linked c7000
Enclosure
ANSWER: C
HP HP0-S17 HP0-S17
NO.13 Your customer is looking for an Ethernet interconnect with Fibre uplinks for their c7000 Enclosure.
Which interconnects should be considered? (Select two.)
A.GbE2c Switch
B.Infiniband switch
C.Cisco Catalyst 3020
D.GbE2c Layer 2/3 Switch
E.Ethernet Pass-Thru Module
ANSWER: CD
HP認定証 HP0-S17練習問題 HP0-S17
NO.14 Which features does Virtual Connect Ethernet module (VC-Enet) provide in a network environment?
(Select two.)
A.VC-Enet can stack across four enclosures in a rack.
B.VC-Enet appears as an HP ProCurve device to other network devices.
C.VC-Enet will not add any new switches for the network administrator to manage.
D.VC-Enet domains can be created directly using the Onboard Administrator console.
ANSWER: AC
HP HP0-S17 HP0-S17 HP0-S17問題集
NO.15 Your customer has a c7000 Enclosure and two power supplies installed in bays 1 and 2. They are
switching from single-phase power to a three-phase power subsystem with full redundancy.
Which action is necessary to make this configuration work and be supported?
A.Install 4 additional power supplies.
B.Move the power supplies to bays 1 and 4.
C.Turn off the Dynamic Power Saver feature.
D.Enable three-phase power using the Onboard Administrator.
ANSWER: A
HP HP0-S17 HP0-S17参考書 HP0-S17
NO.16 You are replacing one of your redundant GbE2c interconnect switch modules in your c7000 Enclosure.
What must you be aware of when you install a replacement GbE2C switch with default settings into the
enclosure?
A.Crosslink ports are disabled and redundancy is lost between switches.
B.Crosslink ports are enabled and will cause a loop in your switch topology.
C.Uplink ports are disabled and must be enabled manually in the switch manager.
D.Downlink ports are disabled and must be enabled manually in the switch manager.
ANSWER: A
HP HP0-S17 HP0-S17認定証 HP0-S17
NO.17 What is an advantage of a c7000 Enclosure compared to a c3000 Enclosure in an enterprise
environment?
A.N+N redundancy in the power subsystem
B.Virtual Connect and storage blade support
C.interconnect redundancy for integrated NICs
D.application of Onboard Administrator advanced license
ANSWER: C
HP認定証 HP0-S17参考書 HP0-S17認証試験 HP0-S17 HP0-S17
NO.18 Which industry standard processor options are supported in the HP BL460c Server Blade? (Select two.)
A.Dual-Core Intel Xeon
B.Quad-Core Intel Xeon
C.Dual-Core Intel Itanium2
D.Dual-Core AMD Opteron
E.Quad-Core AMD Opteron
ANSWER: AB
HP認定資格 HP0-S17 HP0-S17認定資格
NO.19 After replacing a failed drive in a server blade, your customer complains about long logical drive time
recovery. What can you do to reduce recovery time?
A.Migrate the logical drive to RAID 6.
B.Install MPIO software on the server blade.
C.Set the rebuild priority to high on the controller.
D.Enable the Tagged Command Queuing (TCQ) feature on the hard drive.
ANSWER: C
HP HP0-S17 HP0-S17練習問題 HP0-S17 HP0-S17
NO.20 Your customer wants to replace an existing c3000 Enclosure with a c7000 Enclosure. Which
components from the c3000 Enclosure can be reused in the c7000 Enclosure? (Select three.)
A.fans
B.power supplies
C.interconnect modules
D.server and storage blades
E.Onboard Administrator module
ANSWER: ACD
HP HP0-S17 HP0-S17参考書 HP0-S17参考書
NO.21 An administrator configures an HP c7000 Enclosure using Onboard Administrator. Which option can
be used to automatically configure IP addresses for all iLO cards and interconnect modules?
A.Insight Display
B.Virtual Connect Manager
C.Interconnect LAN Manager
D.Enclosure Bay IP Addressing (EBIPA)
ANSWER: D
HP HP0-S17認定試験 HP0-S17
NO.22 Which industry standard memory technology can be used by Intel Xeon-based c-Class server blades
to provide additional protection against failed or degrading FB-DIMMs? (Select two.)
A.Advanced ECC
B.mirrored memory
C.registered DIMMs
D.online spare memory
E.interleaved memory support
ANSWER: BD
HP HP0-S17練習問題 HP0-S17 HP0-S17 HP0-S17認定証
NO.23 Which ProLiant Essentials Value Pack is an integrated power monitoring and management
application that provides centralized monitoring and control of datacenter power consumption and thermal
output?
A.Insight Power Manager
B.HP Rack and Power Manager
C.Performance Management Pack
D.Vulnerability and Patch Management Pack
ANSWER: A
HP過去問 HP0-S17 HP0-S17問題集
NO.24 Which interconnect option creates domains and stacks LAN modules across c7000 Enclosures?
A.GbE2c Ethernet
B.Virtual Connect Ethernet
C.Ethernet Pass-Thru Module
D.Virtual Connect Fibre Channel
ANSWER: B
HP認証試験 HP0-S17 HP0-S17練習問題 HP0-S17参考書
NO.25 The Virtual Connect Fibre Channel module uses which type of Port ID Virtualization protocol to
aggregate multiple Fibre Channel HBAs over a smaller number of physical uplinks?
A.E_Port
B.F_Port
C.L_Port
D.N_Port
ANSWER: D
HP問題集 HP0-S17認定資格 HP0-S17認定証 HP0-S17
NO.26 Which industry standard memory technologies are supported in a BL465c Server Blade? (Select two.)
A.memory sparing
B.memory mirroring
C.memory interleaving
D.ECC and Advanced ECC
E.833MHz maximum speed DIMMs
ANSWER: CD
HP HP0-S17練習問題 HP0-S17 HP0-S17練習問題
NO.27 A customer that usually works with a c3000 Enclosure needs to use the external DVD drive on a
c7000 Enclosure and connect the drive to all servers in the c7000 Enclosure.
How can the external DVD drive on the c7000 Enclosure be accessed?
A.Use the DVD drive integrated in the c7000 Enclosure.
B.Use the DVD drive connected to the downlink port of the c7000 Enclosure.
C.Use the DVD drive connected to the USB port on an Onboard Administrator module.
D.Use the DVD drive attached through the serial/USB/video cable attached to any server blade.
ANSWER: C
HP参考書 HP0-S17過去問 HP0-S17認証試験 HP0-S17
NO.28 Which tool tests and evaluates the hardware and software configuration of systems where HP SIM is
installed or is being considered for installation?
A.Insight Control Advisor
B.HP SIM Capacity Planner
C.Active Answers Solution Sizer
D.Site Installation Preparation Utility
ANSWER: A
HP HP0-S17認定試験 HP0-S17 HP0-S17認定証
NO.29 A customer has a Virtual Connect managed enclosure and needs to move one of the blades to a
non-virtual connect enclosure.
What should be done so that duplicate MAC addresses and WWNs do not appear in the datacenter due
to server blade deployment?
A.Enable the Reset to factory default switch on the blade system board.
B.Run the erase utility on the blade before plugging the server to the network.
C.First delete all MAC and WWNs configurations while the server is in the VC managed enclosure and
then move the server to the non-VC managed enclosure.
D.MAC addresses and WWNs are automatically returned to factory defaults when the server is moved to
the non-Virtual connect enclosure so no duplicate MAC addresses or WWNs appear.
ANSWER: D
HP練習問題 HP0-S17 HP0-S17参考書 HP0-S17
NO.30 A customer wants to deploy a c7000 Enclosure and six server blades in a datacenter with limited
power. How can they ensure the solution fits within the available datacenter power envelope?
A.The customer needs to make sure they have at least 6750 watts of available power in every case.
B.Use the HP BladeSystem Sizer to determine how much power is needed for the configuration they want
to deploy.
C.Use the HP Rack and Power tool to determine how much power is needed for the configuration they
want to deploy.
D.Use the Enterprise Configurator in ActiveAnswers to determine how much power is needed for the
configuration they want to deploy.
ANSWER: B
HP HP0-S17認定証 HP0-S17 HP0-S17 HP0-S17認証試験 HP0-S17
Pass4Testは最新のC_HANATEC_1試験問題集と高品質の000-318認定試験の問題と回答を提供します。Pass4TestのHP0-J66 VCEテストエンジンと70-332試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHH0-050トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。