今この競争社会では、専門の技術があったら大きく優位を占めることができます。IT業界では関連の認証を持っているのは知識や経験の一つ証明でございます。Pass4Testが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、RedHatのRH133試験も一年の無料アップデートになっています。
RedHatのRH133認定試験と言ったら、人々は迷っています。異なる考えがありますが、要約は試験が大変難しいことです。RedHatのRH133認定試験は確かに難しい試験ですが、Pass4Test を選んだら、これは大丈夫です。Pass4TestのRedHatのRH133試験トレーニング資料は受験生としてのあなたが欠くことができない資料です。それは受験生のために特別に作成したものですから、１００パーセントの合格率を保証します。信じないになら、Pass4Testのサイトをクリックしてください。購入する人々が大変多いですから、あなたもミスしないで速くショッピングカートに入れましょう。
弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてRedHatのRH133認定試験の受験生が最良の選択であり、成功の最高の保障でございます。
今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。RH133認定試験はRedHatの中に重要な認証試験の一つですが、Pass4TestにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってRedHat RH133認証試験に参加する方に対して問題集を研究続けています。
試験番号：RH133問題集
試験科目：RedHat 「Red Hat Linux System Administration」
現在でRedHatのRH133試験を受かることができます。Pass4TestにRedHatのRH133試験のフルバージョンがありますから、最新のRedHatのRH133のトレーニング資料をあちこち探す必要がないです。Pass4Testを利用したら、あなたはもう最も良いRedHatのRH133のトレーニング資料を見つけたのです。弊社の質問と解答を安心にご利用ください。あなたはきっとRedHatのRH133試験に合格できますから。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/RH133.html
NO.1 Fill in the blank with the appropriate command.
The ________ command recursively removes files, which have not been accessed for a period oftime.
A. tmpwatch
Answer: A
RedHat問題集 RH133 RH133 RH133
NO.2 You work as a Linux Technician for Tech Perfect Inc. The company has a Linux-based network.
You have configured a database server in the network. Users complain that the server has
become remarkably slow. However, the previous day, the server was performing well. You know that
some of the processes may be the cause of the issue. You run the PS command on the server. In the
result set, which information will you look at that suggests the problematic process?
A. A high load average
B. A high process ID
C. A low load average
D. A low CPU time
E. A high CPU time
Answer: E
RedHat RH133 RH133
NO.3 You work as a Network Administrator for Net World International. The company has a Linux-based
network. You want to upgrade an RPM package and get the status during the upgrade. Which of the
following commands will you use to accomplish the task?
A. rpm -ivh
B. rpm -evh
C. rpm -qvh
D. rpm -Uvh
Answer: D
RedHat RH133 RH133認証試験 RH133 RH133練習問題 RH133
NO.4 Which of the following commands will you run to list all files that have been modified within the last 60
minutes?
A. find /etc -name *.txt
B. find start -dir -min -60
C. find start -dir -cmin -60
D. find start -cmin -60
Answer: C
RedHat参考書 RH133参考書 RH133 RH133認定証 RH133
NO.5 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network.
You are a root user on the Linux system. You have to create a user named Trinity and deny interactive
login. Which of the following should you use to accomplish the task?
Each correct answer represents a part of the solution. Choose all that apply.
A. vi /etc/passwd
B. vi /etc/shadow
C. useradd Trinity
D. passwd Trinity
E. Trinity:x:505:505::/home/Trinity:/sbin/nonlogin
Answer: A,B,C,D,E
RedHat認証試験 RH133過去問 RH133認定証
NO.6 You work as a Network Administrator for Secure Web Inc. The company has a Linux-based network.
The network has a mixed set of client operating systems. You want to format a new hard disk drive. The
drive will have only one partition. Both the Linux and Windows operating systems will access the partition.
Which of the following file systems will you use?
A. VFAT
B. XFS
C. REISER
D. EXT3
Answer: A
RedHat認証試験 RH133 RH133
NO.7 Which of the following commands is used to create a user account for a new user?
A. USERMOD
B. MOUNT
C. USERADD
D. CRUSER
Answer: C
RedHat参考書 RH133認証試験 RH133問題集
NO.8 You work as a Software Engineer for McNiel Inc. The company has a Linux-based network. The
company has 150 Engineers. The root user has configured quota limits for each user. You want to view
quota limits for your system. Which of the following commands will you use to accomplish this task?
A. repquota -a
B. quota -v
C. quotacheck
D. edquota
Answer: B
RedHat RH133 RH133 RH133参考書 RH133 RH133練習問題
NO.9 Which of the following statements are true about kernel modules?
Each correct answer represents a complete solution. Choose all that apply.
A. Kernel modules do not support executable loaders.
B. The kernel module contains extra kernel codes that may be loaded after the loading of the basekernel.
Only a minimal resident kernel is loaded into memory at boot time.
C. Kernel modules do not support the device drivers, network drivers, and file system drivers.
D. Whenever a user requests a feature that is not present in the resident kernel, a kernel moduleis
dynamically loaded into memory.
Answer: B,D
RedHat問題集 RH133 RH133認定試験
NO.10 After enabling shadowed passwords in a Linux server, where does Linux keep the passwords?
A. /usr/shadow
B. /etc/passwd
C. /usr/passwd
D. /etc/shadow
Answer: D
RedHat問題集 RH133 RH133練習問題 RH133認定資格 RH133
NO.11 You work as a Network Administrator for Tech Perfect Inc. The company has a Linux-based network.
You are configuring a server that will be used as a file server. You want to install an RPM package, named
FILELOCATOR, on the server. You want to check whether the package is already installed. Which of the
following commands will you use?
A. grep FILELOCATOR
B. find -q rpm |grep FILELOCATOR
C. rpm -qa | grep FILELOCATOR
D. find FILELOCATOR
Answer: C
RedHat RH133過去問 RH133練習問題
NO.12 You work as a System Administrator for McNeil Inc. The company has a Linux based network.
You are a root user on Red Hat operating system. You have upgraded the amount of RAM in your system
from 256 MB to 512 MB, but there is only 512 MB of swap space. Therefore, you want to add more swap
space to /dev/hdb2 hard drive to run the applications that require a large amount of memory. Which of the
following commands should you run to accomplish this task? Each correct answer represents a complete
solution. Choose all that apply.
A. mkswap /dev/hdb2
B. swapon /dev/hdb2
C. mount
D. parted
Answer: A,B,D
RedHat RH133認定資格 RH133認定試験 RH133 RH133認定試験
NO.13 By default, which of the following commands configures the current run level?
A. chkconfig
B. pstree
C. service
D. ntsysv
Answer: D
RedHat RH133 RH133 RH133
NO.14 When installing RHEL in the graphical interface, which of the following switches can be used to specify
a resolution?
A. lowers
B. vnc
C. resolution
D. skipddc
Answer: C
RedHat問題集 RH133練習問題 RH133 RH133問題集
NO.15 Which of following options will you use to force mtr to display numeric IP numbers and not try to
resolve the host names?
A. -t
B. -n
C. -l
D. -p
Answer: B
RedHat RH133 RH133 RH133 RH133
NO.16 You work as a Network Administrator for Rick Inc. The company has a Linux-based network. You are
configuring a Linux server. Which of the following bootloaders does not require to be rewritten after the
configuration of the kernel has been changed?
A. GRUB
B. BOOTP
C. LILO
D. ELILO
Answer: A
RedHat RH133 RH133認証試験
NO.17 Which of the following commands can be used to modify kernel parameters at runtime?
A. sync
B. sysctl
C. mkinitrd
D. lsdev
Answer: B
RedHat認定試験 RH133認定資格 RH133参考書 RH133認定試験 RH133
NO.18 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to run the cc process at
runlevel three. If the order of execution of cc command is 43, which of the following commands will John
use to accomplish his task?
A. ln -s /etc/init.d/cc /etc/rc.d/rc3.d/K43cc
B. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/K43cc
C. ln -s /etc/rc.d/cc /etc/rc.d/rc3.d/s43cc
D. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/S43cc
Answer: D
RedHat認定試験 RH133認定試験 RH133 RH133 RH133過去問 RH133
NO.19 You want only the root access in a Linux computer for maintenance purposes. Which of the following
runlevels will you use to boot the computer?
A. 2
B. 0
C. 1
D. 3
Answer: C
RedHat RH133過去問 RH133認証試験 RH133 RH133
NO.20 Which of the following commands can be used to compress a file?
Each correct answer represents a complete solution. Choose all that apply.
A. gzip
B. compress
C. tar
D. zip
Answer: A,B,D
RedHat問題集 RH133参考書 RH133 RH133 RH133認定試験 RH133過去問
NO.21 CORRECT TEXT
Drag and drop the appropriate command in front of its respective function.
Answer: A
RedHat RH133 RH133参考書 RH133
NO.22 Which of the following fsck commands will you use to check all filesystems listed in /etc/fstab?
A. fsck -P
B. fsck -f
C. fsck -A
D. fsck -y
Answer: C
RedHat RH133 RH133認定試験 RH133認定証
NO.23 You want to verify the PGP signature of all headers and signatures associated with an RPM package.
Which of the following commands will you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. rpm -e
B. rpm -K
C. rpm --checksig
D. rpm -V
Answer: B,C,D
RedHat RH133 RH133過去問 RH133
NO.24 Which of the following commands displays a module name or filename and associated
information, such as the authors name, license, description, module version, dependencies, parameters,
etc?
A. modprobe
B. lsmod
C. modprob
D. modinfo
Answer: D
RedHat問題集 RH133認定試験 RH133過去問 RH133 RH133練習問題 RH133
NO.25 You want to temporarily change your primary group to another group of which you are a member. In
this process, a new shell will be created, and when you exit the shell, your previous group will be
reinstated. Which of the following commands will you use to accomplish this task?
A. chgrp
B. newgrp
C. chmod
D. chown
Answer: B
RedHat認定資格 RH133認証試験 RH133
NO.26 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. He is working as a root user on the Linux operating system. He wants to add a soft limit quota
warning for the users, in which, after exceeding the quota value, a user will receive e-mail warnings about
being over quotA. Which of the following commands will John use to accomplish his task?
Each correct answer represents a complete solution. Choose all that apply.
A. repquota
B. quotaon
C. warnquota
D. edquota
E. quotaoff
Answer: C,D
RedHat認定資格 RH133 RH133
NO.27 Which of the following commands can be used to check the errors of the ext2 and ext3
filesystems?
Each correct answer represents a complete solution. Choose two.
A. fsck --ext2
B. fsck.ext3
C. fsck --ext3
D. e2fsck
Answer: B,D
RedHat RH133認定証 RH133 RH133認証試験
NO.28 You want to make Rick an owner of the files TRADE1.TXT and TRDREPORT.TXT. Which of the
following commands will you use to accomplish this?
A. chown rick TRADE1.TXT TRDREPORT.TXT
B. chgrp rick TRADE1.TXT + TRDREPORT.TXT
C. chown rick TRADE1.TXT + TRDREPORT.TXT
D. chgrp rick TRADE1.TXT TRDREPORT.TXT
Answer: A
RedHat RH133 RH133
NO.29 What is the minimum RAM requirement for installing Red Hat in GUI mode?
A. 1GB
B. 512 MB
C. 128MB
D. 64MB
Answer: C
RedHat認定試験 RH133 RH133練習問題 RH133参考書
NO.30 After creating the swap area, which of the following commands will you need to run to start using it?
A. mkswap
B. mkfs
C. swapon
D. swapoff
Answer: C
RedHat過去問 RH133過去問 RH133過去問 RH133参考書
人々はそれぞれ自分の人生計画があります。違った選択をしたら違った結果を取得しますから、選択は非常に重要なことです。Pass4TestのRedHatのRH133試験トレーニング資料はIT職員が自分の高い目標を達成することを助けます。この資料は問題と解答に含まれていて、実際の試験問題と殆ど同じで、最高のトレーニング資料とみなすことができます。