Pass4Testがもっと早くIBMの000-374認証試験に合格させるサイトで、IBMの000-374認証試験についての問題集が市場にどんどん湧いてきます。Pass4Testを選択したら、成功をとりましょう。
Pass4Testが提供する真実と全面的なIBM認証試験について資料で100%で君の試験に合格させてまたあなたに1年無料のサービスを更新し、今はPass4Testのインターネットで無料のIBMの000-374認証試験問題集のソフトウェアがダウンロード することができます。
IT業種が新しい業種で、経済発展を促進するチェーンですから、極めて重要な存在ということを我々は良く知っています。IT認証はIT業種での競争な手段の一つです。認証に受かったらあなたは各方面でよく向上させます。でも、受かることが難しいですから、トレーニングツールを利用するのを勧めます。トレーニング資料を選びたいのなら、Pass4TestのIBMの000-374試験トレーニング資料は最高の選択です。この資料の成功率が１００パーセントに達して、あなたが試験に合格することを保証します。
Pass4TestはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はPass4Testが最高の知識源サイトと比較しますた。Pass4Testの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。
Pass4Test を選択して１００％の合格率を確保することができて、もし試験に失敗したら、Pass4Testが全額で返金いたします。
試験番号：000-374問題集
試験科目：IBM 「IBM WebSphere MQ V7.0, System Administration」
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/000-374.html
NO.1 An application deployed on z/OS was causing frequent abends.
Which of the following options from the IPCS Dump Component Panel can an administrator use to
analyze
the problem?
A. CSQWDMP
B. ASMCHECK
C. DIVDATA
D. DAEDATA
Answer: A
IBM認定資格 000-374認定証 000-374 000-374 000-374認定資格
NO.2 An administrator wants to define a IBMWebSphere MQ object so that the applications can be
prevented from sending messages to the processing applications queue APPQ, but continue to allow
administrators to send test messages to the processing application. The application will send messages
using an object
ABC.
What MQSC command should be used?
A. DEFINE QALIAS(ABC) BASEQ(APPQ)
B. DEFINE QALIAS(ABC) TARGET(APPQ)
C. DEFINE QREMOTE(ABC) TARGET(APPQ)
D. DEFINE QLOCAL(ABC) ALIASQ(APPQ)
E. DEFINE QMODEL(ABC) BASEQ(APPQ)
Answer: B
IBM認定証 000-374参考書 000-374 000-374
NO.3 An administrator has been asked to determine which files are needed to restart a queue manager
configured with linear logging.
Which of the following MQSC commands will determine which log files are still required?
A. DISPLAY QMGR
B. DISPLAY QMSTATUS
C. DISPLAY QMSTATUS ALL
D. DISPLAY QMGR RESTART
Answer: C
IBM過去問 000-374 000-374過去問 000-374
NO.4 An administrator has created a queue manager on AIX system A, using the command crtmqm ll QMA.
What command will create a backup queue manager for QMA on AIX system B?
A. crtmqm ll QMB
B. crtmqm ll QMA
C. crtmqm lb QMA
D. crtmqm ll backup QMA
Answer: B
IBM 000-374 000-374
NO.5 What are the advantages of using queue-sharing groups in IBM WebSphere MQ?
A. workload balancing, remote administration
B. improved performance, ease of monitoring
C. scalability, end-to-end security, data integrity
D. scalability, high availability, workload balancing
Answer: D
IBM認証試験 000-374認定試験 000-374 000-374過去問
NO.6 An administrator has been asked to create a queue manager alias for QM1 to be used for
communication
between remote queue managers.
What MQSC command will create the queue manager alias?
A. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(' ') XMITQ(QM1)
B. DEF QR(QM1.ALIAS) RNAME(' ') RQMNAME(QM1) XMITQ(QM1)
C. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(QM1) XMITQ(' ')
D. DEF QL(QM1.ALIAS) RQMNAME(QM1)
Answer: B
IBM問題集 000-374認証試験 000-374 000-374認定試験 000-374
NO.7 Which two user profiles are mandatory to correctly run IBM WebSphere MQ on i5/OS?
A. QMQM, QMQMADM
B. QMQMADIM, mqm
C. mqm, QMQM
D. mqm, MUSR_MQADMIN
Answer: A
IBM 000-374 000-374問題集 000-374認定試験
NO.8 An administrator has created the following MQ objects on two systems:
SYSTEM A
crtmqm -C "VEGGIE QUEUE MANAGER" -LL -Q -D POTATO VEGGIE
DEFINE QR(APPLE) RQMNAME(FRUIT) RNAME(PEACH)
DEFINE QL(DLQ)
DEFINE QL(POTATO) USAGE(XMITQ)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(SDR) TRPTYPE(TCP) CONNAME('9.84.100.7(1414)') +
XMITQ('POTATO')
SYSTEM B
crtmqm -C "FRUIT QUEUE MANAGER" -LL -Q -D GRAPE FRUIT
DEFINE QL(GRAPE) USAGE(XMITQ)
DEFINE QL(PEACH)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(RCVR) TRPTYPE(TCP)
An application connects to queue manager VEGGIE and puts a message to queue APPLE. On which
queue does the message get delivered before it gets picked up by the sender channel?
A. POTATO
B. APPLE
C. GRAPE
D. PEACH
Answer: A
IBM 000-374 000-374認証試験 000-374認証試験
NO.9 An administrator using WebSphere MQ Explorer is unable to connect to queue manager PROD after it
has been migrated, and receives error message SYSTEM.MQEXPLORER.REPLY.MODEL not defined.
Which command will refresh the existing system objects to resolve this issue?
A. strmqm c PROD
B. strmqm a PROD
C. strmqm ss PROD
D. strmqm si PROD
Answer: A
IBM 000-374 000-374
NO.10 What are the four predefined message types?
A. Request, response, publication, datagram
B. Publication, subscription, request, response
C. Request, reply, report, datagram
D. Request, broadcast, acknowledgment, response
Answer: C
IBM 000-374過去問 000-374 000-374問題集 000-374
NO.11 Which features of IBM WebSphere MQ specifically provide robust message transport?
A. Data integrity, security, parallel processing
B. Asynchronous delivery, once and once-only delivery, persistent messaging
C. Time independence, no duplicate delivery, synchronous processing
D. Assured delivery, application parallelism, time dependent applications
Answer: B
IBM 000-374 000-374 000-374問題集
NO.12 Which of the following are performance enhancements to the Java Message Service provider
implementation in IBM WebSphere MQ V7.0?
A. Read Ahead
B. Support for channel exits written in C/C++
C. Asynchronous Put
D. Message selection performed by Queue Manager
E. Ability to access all MQMD fields for IBM WebSphere MQ messages.
Answer: ACD
IBM参考書 000-374問題集 000-374 000-374認定試験
NO.13 A legacy application uses MQPUT to send messages to a queue INV. Which set of MQSC commands
below will successfully configure the queue manager so that a number of
JMS applications can receive these messages by subscribing to topic Inventory/CurrentItems?
A. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE QALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
B. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE TALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
C. DEFINE TOPIC (INV_TOPIC) + TOPICSTR(Inventory/CurrentItems) QALIAS(INV)
D. DEFINE QALIAS(INV) TARGET(Inventory/CurrentItems) + TARGTYPE(TOPIC)
Answer: A
IBM 000-374参考書 000-374 000-374 000-374
NO.14 Which of the following statements are true, regarding applications that communicate via
IBMWebSphere MQ?
IBM WebSphere MQ applications have to agree upon:
A. the platforms they are running on
B. the name(s) of the queue(s) used
C. the maximum number of messages sent within a given time period
D. the layout of the message data exchanged
E. the network protocol used
Answer: BD
IBM 000-374練習問題 000-374 000-374認定証
NO.15 An administrator will install IBM WebSphere MQ on an AIX platform. There is a requirement to
configure
the installation to store the queue managers data files under a directory tree different from the default
specified by the installation.
After creating the appropriate directory tree, the administrator should:
A. specify the file location using the -ld option when running the crtmqm command.
B. add an entry for the variable MQSPREFIX in /var/mqm/service.env before running the crtmqm
command.
C. edit /var/mqm/mqs.ini to specify LogDefaultPath in the LogDefaults stanza before running the crtmqm
command.
D. edit /var/mqm/mqs.ini to specify DefaultPrefix in the AllQueueManagers stanza before running the
crtmqm command.
Answer: D
IBM 000-374 000-374認定証
NO.16 For the Solaris platform, which databases are supported as a resource manager in transactions
coordinated by IBM WebSphere MQ V7.0?
A. Oracle, Derby, My SQL
B. DB2, Derby, Teradata
C. DB2, Oracle, Informix, Sybase
D. DB2, SQL Server, Sybase, Informix
Answer: C
IBM 000-374過去問 000-374 000-374認定試験 000-374認証試験
NO.17 Which Eclipse version is a prerequisite to use MQ Explorer to administer IBM WebSphere MQ V7.0 on
Windows?
A. 3.3
B. 3.2
C. 3.1
D. 3.0
Answer: A
IBM認定証 000-374過去問 000-374問題集 000-374 000-374
NO.18 A company running IBM WebSphere MQ V5.3 on UNIX upgraded to IBM WebSphere MQ V7.0.
Immediately after the migration, what is the administrator expected to do?
Start the:
A. MQSeries service
B. queue manager and listener simultaneously
C. queue manager before starting the listener
D. listener before starting the queue manager
Answer: C
IBM認証試験 000-374参考書 000-374 000-374認定試験 000-374
NO.19 An administrator wants to prevent the channel initiator process from starting when a queue manager
QMA on AIX is started.
Which action(s) will accomplish this?
A. Restart the queue manager using strmqm ns QMA.
B. Restart the queue manager using strmqm chinit no QMA.
C. Issue the command ALTER QMGR SCHINIT(DISABLED), then restart the queue manager using
strmqm QMA.
D. Edit the file qm.ini for QMA and add an entry ChannelInitiator = No in the CHANNELS stanza, then
restart the queue manager using strmqm QMA
Answer: A
IBM 000-374認証試験 000-374 000-374
NO.20 An administrator created a queue manager Paint.queue.manager on AIX with circular logging. The
administrator then was told that the system will be used for production, so the logging needs to be
switched to linear.
How can the administrator make this change?
A. Edit "/var/mqm/mqs.ini" and change LogType=LINEAR
B. Edit "/var/mqm/qmgrs/Paint.queue.manager/qm.ini" and change LogType=LINEAR
C. Issue the MQSC command ALTER QMGR LOGTYPE(LINEAR)
D. Recreate queue manager with crtmqm -c "Paint shop" -ll -q Paint.queue.manager
Answer: D
IBM問題集 000-374練習問題 000-374参考書 000-374認証試験
多くの時間とお金がいらなくて２０時間だけあって楽に一回にIBMの000-374認定試験を合格できます。Pass4Testが提供したIBMの000-374試験問題と解答が真実の試験の練習問題と解答は最高の相似性があります。