IT認証試験を受かるかどうかが人生の重要な変化に関連することを、受験生はみんなよく知っています。Pass4Testは低い価格で高品質の迫真の問題を受験生に提供して差し上げます。Pass4Testの製品もコスト効率が良く、一年間の無料更新サービスを提供しています。当社の認定トレーニングの材料は、すぐに入手できます。当社のサイトは答案ダンプのリーディングプロバイダーで、あなたが利用したい最新かつ最正確の試験認定トレーニング材料、いわゆる試験問題と解答を提供しています。
Pass4Testを選択したら100%試験に合格することができます。試験科目の変化によって、最新の試験の内容も更新いたします。Pass4Testのインターネットであなたに年24時間のオンライン顧客サービスを無料で提供して、もしあなたはPass4Testに失敗したら、弊社が全額で返金いたします。
Pass4Testはあなたの１００パーセントの合格率を保証します。例外がないです。いまPass4Testを選んで、あなたが始めたいトレーニングを選んで、しかも次のテストに受かったら、最も良いソース及び市場適合性と信頼性を得ることができます。Pass4TestのOracleのCX-310-811問題集と解答はCX-310-811認定試験に一番向いているソフトです。
OracleのCX-310-811認定試験がIT業界には極めて重要な地位があるがよく分かりましょう。試験に合格するのは簡単ではないもよくわかりましょう。“簡単に合格できる方法がありますか？”答えはもちろんですよ。Pass4Testはこの問題を着々解決できますよ。IT専門家がOracleのCX-310-811認定試験に関する特別な問題集を開発しています。それをもって、試験は問題になりませんよ。
多くの時間と労力をかかってOracleのCX-310-811認定試験に合格するを冒険にすると代わりPass4Testが提供した問題集を利用してわずか一度お金かかって合格するのは価値があるでしょう。今の社会の中で時間がそんなに重要で最も保障できるPass4Testを選ばましょう。
Pass4TestのOracleのCX-310-811試験問題資料は質が良くて値段が安い製品です。我々は低い価格と高品質の模擬問題で受験生の皆様に捧げています。我々は心からあなたが首尾よく試験に合格することを願っています。あなたに便利なオンラインサービスを提供して、Oracle CX-310-811試験問題についての全ての質問を解決して差し上げます。
試験番号：CX-310-811問題集
試験科目：Oracle 「MySQL 5.0 Database Administrator Certified Professional Exam, Part II 」
「私はだめです。」という話を永遠に言わないでください。これは皆さんのためのアドバイスです。難しいOracleのCX-310-811認定試験に合格する能力を持たないと思っても、あなたは効率的な骨の折れないトレーニングツールを選んで試験に合格させることができます。Pass4TestのOracleのCX-310-811試験トレーニング資料はとても良いトレーニングツールで、１００パーセントの合格率を保証します。それに、資料の値段は手頃です。Pass4Testを利用したらあなたはきっと大いに利益を得ることができます。ですから、「私はだめです。」という話を言わないでください。諦めないのなら、希望が現れています。あなたの希望はPass4TestのOracleのCX-310-811試験トレーニング資料にありますから、速く掴みましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/CX-310-811.html
NO.1 Which of the following best describes why InnoDB tables should always have primary keys and why
they should be short?
A. Because InnoDB uses primary keys to locate tables, and shorter keys make quicker lookups.
B. Because InnoDB uses primary keys to locate table rows, and shorter keys make quicker lookups.
C. Because InnoDB stores pointers in a log to all the primary keys and shorter keys make this log smaller.
Answer: B
Oracle CX-310-811認定資格 CX-310-811 CX-310-811 CX-310-811認証試験
NO.2 Privileges for using stored routines can be specified at the following levels:
A. Server-wide
B. Per database
C. Per routine
D. The ability to use stored procedures is not governed by the privilege system.
Answer: ABC
Oracle CX-310-811問題集 CX-310-811参考書 CX-310-811
NO.3 How can stored routines be used to check for constraints or legality of incoming data?
A. They can make use of the VALIDATE DEFINER setting.
B. They can not be used to check for constraints or legality of data.
C. They can check and only perform an action if the incoming values match a specified value.
Answer: C
Oracle CX-310-811認定証 CX-310-811 CX-310-811練習問題
NO.4 Consider the following GRANT statement:
GRANT USAGE ON *.* TO 'kofi'@'localhost' IDENTIFIED BY 'password'
What is the implications of executing that statement?
A. Kofi can access all database objects.
B. Kofi can access all his tables.
C. Kofi can display server system and status variables.
D. Kofi can grant privileges to others.
E. Kofi can access all database objects belonging to localhost.
Answer: C
Oracle認定資格 CX-310-811 CX-310-811過去問
NO.5 You have been granted SELECT, INSERT and DELETE privileges on the table city in the world
database. You log in, and exercise all your privileges without any problems.
While you are still connected and doing work, the administrator removes your DELETE privileges and
informs you by mail that you can no longer delete from table city.
Being skeptical, you decided to test your privileges and realize that you still have them all. What is are the
most likely causes of this?
A. The administrator forgot to revoke your UPDATE privilege
B. The administrator forgot to revoke your SELECT privilege
C. The administrator removed the DELETE privilege by performing an UPDATE directly on the
mysql.table_priv table
D. The administrator did not execute FLUSH PRIVILEGES
Answer: CD
Oracle CX-310-811過去問 CX-310-811 CX-310-811 CX-310-811
NO.6 Which of the following statements are required to create a key cache of 4 MB, assign the MyISAM table
world.City to it and preload the index?
A. mysql> SET GLOBAL city_cache.key_buffer_size = 4194304;mysql> CACHE INDEX world.City IN
city_cache;mysql> LOAD INDEX INTO CACHE world.City;
B. mysql> ALTER TABLE world.city KEY_CACHE = 4194304;
C. mysql> CREATE CACHE FOR world.City SIZE = 4194304;
D. It is not possible to create a key cache for a specific MyISAM table, only the global key cache can be
used.
Answer: A
Oracle問題集 CX-310-811 CX-310-811認証試験
NO.7 How can the SHOW PROCESSLIST command be helpful when optimizing queries?
A. It shows if a query is using an index or not.
B. It shows how the server processes a query.
C. If checked periodically, it can reveal queries that cause other queries to hang.
D. It shows the percentage of processing power that each query is using on a server.
Answer: C
Oracle CX-310-811 CX-310-811 CX-310-811認定資格
NO.8 The stored function year_to_date is created by the 'root'@'localhost' account as follows:
CREATE FUNCTION year_to_date ()
RETURNS DECIMAL(10,2)
SQL SECURITY DEFINER
BEGIN
...
END;
Within the routine body, a number of calculations are made on data in the financials table and the
calculated value is returned. The only account which can access the financials table is 'root'@'localhost'.
If a client connects with the account 'joe'@'localhost' and calls the year_to_date function, what will
happen?
A. The function will always execute as if it was 'root'@'localhost' that invoked it since SQL SECURITY
DEFINER has been specified.
B. The function will not execute, as 'joe'@'localhost' does not have access to the financials table
C. The function will not execute as SQL SECURITY DEFINER has been specified. It would execute if
instead SQL SECURITY INVOKER had been specified
D. If the account 'joe'@'localhost' has the EXECUTE privilege on year_to_date, the function will complete
successfully
Answer: D
Oracle CX-310-811問題集 CX-310-811練習問題
NO.9 Is the following statement true or false? The username you use to connect to MySQL must be the same
as the login used to access the operating system.
A. true
B. false
Answer: B
Oracle CX-310-811 CX-310-811認定資格 CX-310-811 CX-310-811認定証
NO.10 Consider the following:
mysql> EXPLAIN SELECT Name FROM Country WHERE Code = 'CAN'\G
*************************** 1. row ***************************
id: 1
select_type: SIMPLE
table: Country
type: const
possible_keys: PRIMARY
key: PRIMARY
key_len: 3
ref: const
rows: 1
Extra:
Which of the following best describes the meaning of the value of the type column?
A. The table has exactly one row.
B. Several rows may be read from the table.
C. Only one row of all its rows need to be read.
Answer: C
Oracle CX-310-811 CX-310-811 CX-310-811 CX-310-811認定証 CX-310-811
NO.11 Which of the following statements about the slow query log is true?
A. The slow query log will always contain just slow queries.
B. The slow query log may not always contain just slow queries.
C. The slow query log always logs more than just slow queries.
Answer: B
Oracle問題集 CX-310-811練習問題 CX-310-811 CX-310-811
NO.12 What are reasons to prefer using GRANT and REVOKE statements over editing the privilege tables
directly?
A. Using GRANT and REVOKE allows the server to figure out the right tables and do all the appropriate
work
B. All grant tables in memory are immediately updated on GRANT and REVOKE
C. Making changes directly to the grant tables, one must remember to execute flush privileges to make
the
changes take effect
D. GRANT and REVOKE statements allow you to do more fine-grained tuning of user privileges than
does
editing the grant tables directly.
E. None of the above
Answer: BCD
Oracle CX-310-811 CX-310-811 CX-310-811認定資格 CX-310-811過去問
NO.13 Consider the following query:
GRANT ALL ON world.* TO 'web'@'hostname'
What privileges would this give this user?
A. All privileges including GRANT.
B. All privileges except GRANT.
C. SELECT, INSERT, UPDATE and DELETE.
D. ALL can not be used when granting privileges.
Answer: B
Oracle CX-310-811 CX-310-811参考書 CX-310-811 CX-310-811
NO.14 With replication, what on the master is used to send commands to the slave?
A. The relay log.
B. The binary log.
C. The SQL Thread.
Answer: B
Oracle参考書 CX-310-811過去問 CX-310-811 CX-310-811参考書
NO.15 Assuming that the account 'joe'@'%' does not already exist on the server, executing the statement
mysql> CREATE USER 'joe'@'%' IDENTIFIED BY 'sakila'
will have the following consequences:
A. The account 'joe'@'%' is created on the server. However, clients cannot connect using this account
until further privileges have been assigned to the account.
B. The account 'joe'@'%' is created on the server. Clients may connect to the server using this account,
but will not be able to access any databases, tables or stored routines
C. The account 'joe'@'%' is created on the server. Clients may connect to the server using this account
and execute stored routines, but will not be able to access any databases or tables
D. Nothing; there is no such command as CREATE USER
Answer: B
Oracle認定資格 CX-310-811認定資格 CX-310-811 CX-310-811問題集
NO.16 Which of the following statements are true of how access control is based?
A. It is based off of an access control table in the mysql database.
B. It is based off of grant tables in the mysql database.
C. It is based off of an access control list stored in the data directory.
D. It is based off of an access control list stored inside the .frm files of each table.
Answer: B
Oracle認定証 CX-310-811 CX-310-811 CX-310-811過去問
NO.17 When working with stored routines, which of the following are true in regards to the effect on the
amount of data exchanged between client and server?
A. They may increase the amount of data exchanged.
B. They can help reduce the amount of data exchanged.
C. They have no effect on the amount of data exchanged.
Answer: B
Oracle認定試験 CX-310-811 CX-310-811認定試験 CX-310-811練習問題 CX-310-811問題集 CX-310-811
NO.18 For which of the following objects can privileges be specified?
A. Host
B. Global
C. Database
D. Table
E. Column
F. Row
Answer: BCDE
Oracle認定資格 CX-310-811 CX-310-811 CX-310-811
NO.19 Given the following MyISAM table structure:
mysql> desc city;
+-------------+----------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |
+-------------+----------+------+-----+---------+----------------+
| ID | int(11) | | PRI | NULL | auto_increment |
| Name | char(35) | | | | |
| CountryCode | char(3) | | | | |
| District | char(20) | | | | |
| Population | int(11) | | MUL | 0 | |
+-------------+----------+------+-----+---------+----------------+
and the following SQL statement:
SELECT Population
FROM city
WHERE Population = 10000
ORDER BY Population
LIMIT 5;
which of the following statements best describes how MySQL optimizer executes the query?
A. The optimizer uses the primary key column ID to read the index values, then uses the index on
Population to filter the results. The optimizer will always choose to use a unique index first, then use a
secondary index if available.
B. The optimizer uses the index on the Population column to search and filter the WHERE clause. A
temporary table is used to perform a filesort on the results, and then only 5 records are returned to the
client.
C. The optimizer uses the index on the Population column to search, filter and sort the Population column,
then returns 5 records to the client. The optimizer does not need to read the data rows, and can return
values from the index only, because the index contains just integer values that form a leftmost prefix for
the key.
D. The optimizer uses the index on the Population column to search, filter and sort the Population column,
and returns 5 records to the client. The optimizer does not need to read the data rows, and can return
values from the index only because only those columns where specified in the SELECT statement.
E. The optimizer will never read data from disk, since MySQL caches both data and index in the key
buffer.
Answer: D
Oracle CX-310-811 CX-310-811参考書 CX-310-811認定試験
NO.20 Which of the following best describes how the relay log works?
A. It records the times when the slave connects to the master.
B. When a slave receives a change from the master, it is recorded in the relay log first and processed
later.
C. When a slave receives a change from the master, it is processed first and then recorded in the relay
log.
Answer: B
Oracle認定証 CX-310-811認定資格 CX-310-811 CX-310-811認定試験 CX-310-811
OracleのCX-310-811認定試験に受かることを悩んでいたら、Pass4Testを選びましょう。Pass4TestのOracleのCX-310-811試験トレーニング資料は間違いなく最高のトレーニング資料ですから、それを選ぶことはあなたにとって最高の選択です。IT専門家になりたいですか。そうだったら、Pass4Testを利用したください。