Pass4TestはJuniperのJN0-331認定試験に受かりたい各受験生に明確かつ顕著なソリューションを提供しました。当社はJuniperのJN0-331認定試験の詳しい問題と解答を提供します。当社のIT専門家が最も経験と資格があるプロな人々で、我々が提供したテストの問題と解答は実際の認定試験と殆ど同じです。これは本当に素晴らしいことです。それにもっと大切なのは、Pass4Testのサイトは世界的でJN0-331試験トレーニングによっての試験合格率が一番高いです。
Pass4Testを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。Pass4TestはJuniper JN0-331認証試験を助けって通じての最良の選択で、１００％のJuniper JN0-331認証試験合格率のはPass4Test最高の保証でございます。君が選んだのはPass4Test、成功を選択したのに等しいです。
中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。Pass4TestのJuniperのJN0-331試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くPass4TestのJuniperのJN0-331試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。
Pass4TestのJuniperのJN0-331認証試験について最新な研究を完成いたしました。無料な部分ダウンロードしてください。きっと君に失望させないと信じています。最新JuniperのJN0-331認定試験は真実の試験問題にもっとも近くて比較的に全面的でございます。
IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてJuniperのJN0-331試験に参加して認可を得たくて、Juniper のJN0-331試験が難度の高いので合格率も比較的低いです。JuniperのJN0-331試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。
試験番号：JN0-331問題集
試験科目：Juniper 「SEC,Specialist(JNCIS-SEC)」
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/JN0-331.pdf
NO.1 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD
Juniper JN0-331 JN0-331 JN0-331過去問 JN0-331
NO.2 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper JN0-331 JN0-331練習問題
NO.3 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC
Juniper JN0-331練習問題 JN0-331 JN0-331練習問題
NO.4 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD
Juniper JN0-331問題集 JN0-331 JN0-331練習問題
NO.5 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD
Juniper JN0-331 JN0-331
NO.6 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper JN0-331 JN0-331
NO.7 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D
Juniper JN0-331認定証 JN0-331 JN0-331認証試験
NO.8 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
Juniper JN0-331 JN0-331 JN0-331問題集
NO.9 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper認定証 JN0-331認定資格 JN0-331 JN0-331練習問題 JN0-331 JN0-331
NO.10 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE
Juniper JN0-331 JN0-331 JN0-331
NO.11 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C
Juniper JN0-331認定証 JN0-331認定資格
NO.12 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C
Juniper問題集 JN0-331 JN0-331参考書 JN0-331 JN0-331
NO.13 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
Juniper認定試験 JN0-331 JN0-331練習問題 JN0-331
NO.14 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D
Juniper JN0-331 JN0-331問題集
NO.15 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD
Juniper過去問 JN0-331認定証 JN0-331 JN0-331 JN0-331認定資格
NO.16 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
Juniper練習問題 JN0-331 JN0-331過去問 JN0-331 JN0-331認定証
NO.17 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE
Juniper問題集 JN0-331参考書 JN0-331 JN0-331 JN0-331認定資格
NO.18 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
Juniper JN0-331 JN0-331 JN0-331 JN0-331
NO.19 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A
Juniper JN0-331 JN0-331認定試験 JN0-331認定証 JN0-331練習問題
NO.20 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC
Juniper過去問 JN0-331 JN0-331認定証 JN0-331認定試験
Pass4TestはJuniperのJN0-331認定試験に便利なサービスを提供するサイトで、従来の試験によってPass4Test が今年のJuniperのJN0-331認定試験を予測してもっとも真実に近い問題集を研究し続けます。