Pass4TestはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がPass4Testの問題集を使うので試験に合格しますた。彼らはPass4Testの問題集が有効なこと確認しました。Pass4Testが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、1Z0-108試験はOracleの一つ重要な認証試験で、多くの人がOracle認証されたくて試験に合格しなければなりません。
Oracleの1Z0-108の認定試験の受験生は試験に合格することが難しいというのをよく知っています。しかし、試験に合格することが成功への唯一の道ですから、試験を受けることを選ばなければなりません。職業価値を高めるために、あなたは認定試験に合格する必要があります。Pass4Testが開発された試験の問題と解答は異なるターゲットに含まれていますし、カバー率が高いですから、それを超える書籍や資料が絶対ありません。大勢の人たちの利用結果によると、Pass4Testの合格率は１００パーセントに達したのですから、絶対あなたが試験を受かることに重要な助けになれます。Pass4Testは唯一のあなたの向いている試験に合格する方法で、Pass4Testを選んだら、美しい未来を選んだということになります。
Pass4Testが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、Oracleの1Z0-108試験も一年の無料アップデートになっています。
試験番号：1Z0-108問題集
試験科目：Oracle 「Oracle WebLogic System Administration」
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/1Z0-108.pdf
NO.1 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
If the admin server for New York cluster crashes, what will be the effect on inter-cluster communication
between the two sites?
A. There's no effect on the inter-cluster communication between the two sites
B. JDBC session flushing between two sites will be affected and will only be restarted on the Admin server
reboot.
C. Intra-cluster multicasting will be affected and inter-cluster communication will slow down between the
sites.
D. The Managed Servers will lose session stickiness and the server Health state will be changed to
suspend.
E. Both c and d
Answer: A
Oracle参考書 1Z0-108 1Z0-108認定試験
NO.2 In a multi-server WebLogic domain, monitoring the JVM statistics showed frequent full garbage
collections (gc) on one of the server instances. Which one of the following would greatly reduce the
frequency of full gcs?
A. Increasing the young object space in the heap
B. Turning the -verbosegc flag on
C. Adding more servers to the domain
D. Running more servers per machine
Answer: A
Oracle 1Z0-108認定資格 1Z0-108 1Z0-108 1Z0-108 1Z0-108練習問題
NO.3 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What would be the characteristics of the above WAN Cluster for optimal performance and scalability?
A. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via in-memory, JDBC or file persistence.
B. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous replication
intra-cluster and cross-cluster replication via file persistence.
C. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via JDBC
D. Low network latency, asynchronous persistent replication between WAN-1 and WAN-2, no intra-cluster
replication and cross-cluster replication via JDBC
E. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous
intra-cluster replication and cross-cluster replication via cookie persistence.
Answer: C
Oracle 1Z0-108 1Z0-108 1Z0-108過去問
NO.4 Click on the Exhibit button.
Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration ?one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 10.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to upgrade
the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to configure
multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is via a JMS
message bridge. When a service engineer calls in with a report, a message is sent via JMS to the
Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is not
lost because the call management system is not able to resend messages. To address this, the Customer
Service application is accessing a persistent JMS Queue using an XA compatible connection factory.
The database security team insists that any use of the corporate Oracle database can be traced to the
individual user that made the request. How can this be achieved when using WebLogic JDBC Data
Sources?
A. Set the Enable Credential Mapping property for the Data Source.
B. Set Initial Capacity to zero, so each user creates a new connection.
C. Set the value of user to {WLS_USER} in the Properties field.
D. This can only be done using application code.
E. This cannot be done because Data Sources connect using a single username.
Answer: A
Oracle参考書 1Z0-108 1Z0-108 1Z0-108問題集 1Z0-108 1Z0-108
NO.5 Which of the following statements are true for built-in roles in the WebLogic Server Administration
console? Choose two.
A. Users who belong to the Operator role can deploy the applications.
B. Users who belong to the Monitor role can view the server configuration, except for the encrypted
attributes.
C. Users who belong to the Admin role cannot deploy applications.
D. Only users who belong to the Admin role can start, stop, and resume the server.
E. Users who belong to the Admin role can modify the entire server configuration.
Answer: BE
Oracle問題集 1Z0-108過去問 1Z0-108認定試験 1Z0-108
NO.6 Scenario : Consider a b2b commerce application hosted on a WebLogic cluster with JMS messages
being received, processed, and forwarded to external servers. The server log indicates a potential stuck
thread problem where threads are continually getting stuck and JMX monitoring indicates a continuous
backlog of pending messages that could be due to any of the in-flight messages, delayed messages, or
messages being inhibited from delivery.
The recommended approach for setting the number of execute threads would be:
A. Set the default thread pool max value to match load expectations
B. Use an iterative approach to set the max thread count value
C. Set this value the same as the max connections value set on database connections
D. Leave this setting to be handled by the Work Manager by configuring MaxThreadsConstraint
Answer: D
Oracle認定資格 1Z0-108 1Z0-108問題集
NO.7 Which of the following is true about JMS Quota resources in WebLogic Server 10.x?
A. Quota settings can be shared across multiple JMS destinations so that they can compete.
B. Quota settings are defined on the JMS connection factory level.
C. Quota settings can be used to limit the number of JMS Connections to a JMS Server.
D. Quota settings can be shared across multiple WebLogic domains.
Answer: A
Oracle 1Z0-108練習問題 1Z0-108 1Z0-108
NO.8 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
10.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A
Oracle 1Z0-108認定試験 1Z0-108 1Z0-108練習問題 1Z0-108認証試験
NO.9 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
An EAR file is being deployed to the cluster using two-phase deployment. Which of the following is true if
one of the Managed Servers is NOT started in the cluster?
A. First and second phase deployment will be completed on all remaining instances in the cluster.
B. First phase deployment will not be completed on the remaining instances in the cluster.
C. First phase deployment will be completed but the second phase will not be completed on the remaining
instances in the cluster.
D. First and second phase deployment will not be completed if enforceClusterConstraints is set to true for
the Deployer.
E. Both a and d
Answer: E
Oracle 1Z0-108 1Z0-108問題集 1Z0-108 1Z0-108認証試験 1Z0-108
NO.10 An application-wide deployment plan was used to deploy an application. Based on post-performance
diagnosis, the HTTP post size needs to be reduced. Following would be a valid approach:
A. Configure the http maximum post size value in the existing deployment plan for redeploying using the
weblogic.Deployer utility.
B. Update the http maximum post size for the application using weblogic.Deployer.
C. Use weblogic.PlanGenerator to update http maximum post size configuration and redeploy the
application.
D. Use weblogic.Admin to set auto-tune-http-setting to be true and redeploy the application.
Answer: A
Oracle問題集 1Z0-108認定資格 1Z0-108 1Z0-108認定資格
NO.11 The deployment configuration for an application or module is NOT stored in which type of the following
XML document:
A. J2EE deployment descriptors
B. weblogic-*.xml descriptors
C. WebLogic Server deployment plans
D. WebLogic config.xml
Answer: D
Oracle 1Z0-108認定試験 1Z0-108 1Z0-108
NO.12 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
A JSP in the web application makes an initial Context lookup on the stateless EJB and makes multiple
method calls to the EJB. Which of the following is true?
A. Each method call is invoked on an EJB on the same server as the web application as long as the server
is not overloaded.
B. Each method call is invoked on the same EJB in the same server as the web application as long as the
server is not overloaded.
C. Each method call round robins between the servers.
D. The behavior depends on the load algorithm on the replica-aware stub.
E. Every third call goes to a random server.
Answer: A
Oracle 1Z0-108練習問題 1Z0-108
NO.13 Click on the Exhibit button.
Scenario : A multi-network cluster, say WAN-1 and WAN-2, is being created that will provide WAN HTTP
session failover. The WAN-1 cluster is located in London and the WAN-2 cluster is located in New York and
is connected via a slow interconnect. The client request passes through a Global load balancer which load
balances the request to local load balancers which eventually pass the load to WebLogic Server instances
in the cluster. Four WebLogic Server instances will be running on each cluster distributed on two physical
machines, two WebLogic instances per physical machine. A database is configured on each cluster for
HTTP Session state failover between the clusters.
How can you configure in-memory session replication on the London cluster?
A. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
memory.
B. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
replicated.
C. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
cookie.
D. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
memory.
E. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
replicated.
Answer: B
Oracle 1Z0-108 1Z0-108参考書 1Z0-108 1Z0-108認定証 1Z0-108認定証
NO.14 JMS interop modules are different from JMS system resource modules because (Choose two)
A. JMS interop modules cannot use "Unit-of-Order".
B. JMS interop modules can be targeted to multiple WebLogic Servers at the same time in a domain.
C. JMS interop module configuration is always stored as interop-jms.xml.
D. JMS interop module cannot use "Quota."
Answer: BC
Oracle 1Z0-108認証試験 1Z0-108 1Z0-108 1Z0-108練習問題
NO.15 Requirement demands that an incoming request from a portfolio manager has to have a higher priority
compared to other users of the application. As an administrator, which one of the following approaches
would you adopt?
A. Use Work Manager with the execute thread model to set up rules to associate a priority to the user.
B. Use Work Manager fair-share-request-class to associate a priority to the user.
C. Use Work Manager response-time-request-class to associate a priority to the user.
D. Use Work Manager context-request-class to associate a priority to the user.
Answer: D
Oracle認定証 1Z0-108過去問 1Z0-108認定証 1Z0-108
NO.16 When a message is being processed by a consumer, the other unprocessed messages which belong to
the same Unit-of-Order will be:
A. Expired
B. Blocked
C. Delivered to the consumers
D. Rolled back
Answer: B
Oracle参考書 1Z0-108練習問題 1Z0-108 1Z0-108 1Z0-108過去問
NO.17 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What happens if all the servers hosted in the London cluster crashes in the middle of an http session
update?
A. The session will be regenerated on the New York cluster without any session data loss, and a new
primary server will be created using the secondary session data.
B. The session will be regenerated on the New York cluster but there could be a loss of session data; a new
primary server will be created using the last known secondary session data.
C. The session will not be regenerated on any cluster; the user will be redirected to the New York cluster to
create a new session.
D. The session will be regenerated if the primary server on the London cluster is restarted.
E. Both b and d
Answer: B
Oracle 1Z0-108認定証 1Z0-108練習問題 1Z0-108認定資格 1Z0-108練習問題
NO.18 The feature to group messages into a single unit that is processed sequentially in the order that the
messages were created is called
A. Unit-or-Sort
B. Message Sorting
C. Destination Keys
D. Unit-of-Order
Answer: D
Oracle 1Z0-108 1Z0-108認定資格
NO.19 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end Warehousing
Application. To distribute the messages across the cluster, you decided to configure the distributed
destination. Also the Warehousing Application is a legacy application written to implement a proprietary MQ
API connecting an MQ-Series server. The Stock Control Application is implemented as a web application on
a WebLogic cluster delivering the message to the distributed destination. The cluster has three Managed
Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the high-powered
and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A
Oracle 1Z0-108認証試験 1Z0-108過去問 1Z0-108
NO.20 Scenario : Consider an upgrade requirement from pre-WebLogic Server 10.x to the WebLogic Server
10.x. Since the administration scripts in the prior version used WebLogic Ant tasks for creation and
deployment, the team decides to use the Ant build.xml approach and extend this to the current version of
the server.
Which of the following about the Ant task wlserver is INCORRECT?
A. wlserver can be used to start, reboot or shut down server instances.
B. wlserver can be used to connect to existing server instances.
C. wlserver can be used to create a multiple server domain configuration.
D. wlserver can be used to create a single server domain and to connect to the server.
Answer: C
Oracle過去問 1Z0-108 1Z0-108 1Z0-108
あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。Pass4Test Oracleの1Z0-108試験問題集はあなたが自分の目標を達成することを助けられます。Pass4Test Oracleの1Z0-108問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。