君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからPass4Testの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。Pass4Testだけ全面と高品質の問題集があるのではPass4Testの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、Pass4Testに多くの受験生の歓迎されます。
Pass4Testは君の試験に合格させるだけでなく本当の知識を学ばれます。Pass4Testはあなたが100% でA00-212試験に合格させるの保証することができてまたあなたのために一年の無料の試験の練習問題と解答の更新サービス提供して、もし試験に失敗したら、弊社はすぐ全額で返金を保証いたします。
Pass4Testがもっと早くSASInstituteのA00-212認証試験に合格させるサイトで、SASInstituteのA00-212認証試験についての問題集が市場にどんどん湧いてきます。あなたがまだ専門知識と情報技術を証明しています強い人材で、Pass4TestのSASInstituteのA00-212認定試験について最新の試験問題集が君にもっとも助けていますよ。
試験番号：A00-212問題集
試験科目：SASInstitute 「SAS Advanced Programming Exam for SAS 9」
Pass4Testを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。Pass4TestはSASInstitute A00-212認証試験を助けって通じての最良の選択で、１００％のSASInstitute A00-212認証試験合格率のはPass4Test最高の保証でございます。君が選んだのはPass4Test、成功を選択したのに等しいです。
Pass4TestにたくさんのIT専門人士がいって、弊社の問題集に社会のITエリートが認定されて、弊社の問題集は試験の大幅カーバして、合格率が１００％にまで達します。弊社のみたいなウエブサイトが多くても、彼たちは君の学習についてガイドやオンラインサービスを提供するかもしれないが、弊社はそちらにより勝ちます。Pass4Testは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。そして、弊社が提供した問題集を安心で使用して、試験を安心で受けて、君のSASInstitute A00-212認証試験の１００％の合格率を保証しますす。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/A00-212.pdf
NO.1 The following SAS program is submitted:
%let first=yourname;
%let last=first;
%put &&&last;
What is written to the SAS Log?
A. First
B. Yourname
C. &&First
D. &yourname
Answer: B
SASInstitute問題集 A00-212 A00-212練習問題
NO.2 The following SAS program is submitted:
date view=sauser.ranch;
describe;
run;
What is the result?
A. The program creates a DATA step view called SASUSER.RANCH and places the
program cod in the current editor window
B. The program retrieves the SAS source code that creates the view and places it in the
output window
C. The program creates a DATA step view called SASUSER.RANCH and places it in the
SAS log
D. the program retrieves the SAS source code that creates the view and places it in the
SAS log
Answer: D
SASInstitute A00-212 A00-212問題集 A00-212
NO.3 Given the SAS data set ONE:
ONE
DIVISION SALES
A 1234
A 3654
B 5678
The following SAS program is submitted:
Data_null_;
Set one;
By divition;
If first.division then
Do;
%let mfirst=sales;
end;
run;
What is the value of the macro variable MFRIST when the program finishes execution?
A. 1234
B. sales
C. 5678
D. null
Answer: B
SASInstitute A00-212 A00-212認定試験 A00-212 A00-212
NO.4 The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
A. result is
B. result is 10.5
C. result is 10+0.5
D. result is 10
Answer: B
SASInstitute A00-212 A00-212 A00-212過去問 A00-212 A00-212
NO.5 The following SAS program is submitted:
%micro test(var);
%let jobs=BLACKSMITH WORDSMITH SWORDSMITH;
%let type=%index(&jobs,&var);
%put type = &type;
%mend;
%test(SMITH)
What is the value of the macro variable TYPE when the %PUT statement executes?
A. 0
B. Null
C. 6
D. 3
Answer: C
SASInstitute認定証 A00-212参考書 A00-212 A00-212認証試験
NO.6 The following SAS program is submitted:
%macro one(input);
%two;
%put the value is &date;
%mend;
%macro two;
data _null_;
call symput('date','12SEP2008');
run;
%mend;
%let date=31DEC2006;
%one(&date)
What is the result when the %PUT statement executes.?
A. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the ONE macro
B. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the TWO macro
C. A macro variable DATE with the value 12SEP2008 is retrieved from the global
symbol table
D. A macro variable DATE with the value 31DEC2006 is retrieved from the global
symbol table
Answer: C
SASInstitute認定証 A00-212 A00-212認定資格 A00-212過去問 A00-212問題集 A00-212過去問
NO.7 The following SAS program is submitted:
%let dept=prod;
%let prod=merchandise;
The following message is written to the SAS log:
The value is "merchandise"
Which SAS System option writes this message to the SAS log? A. %put the value is "&&&dept";
B. %put the value is "&&&dept";
C. %put the value is "&&&dept";
D. %put the value is %quote(&&&dept);
Answer: A
SASInstitute練習問題 A00-212 A00-212 A00-212認定証 A00-212
NO.8 Which SET statements option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. OBS=pointobs
B. POINT=pointobs
C. KEY=pointobs
D. NOBS=pointobs
Answer: B
SASInstitute A00-212認定資格 A00-212問題集 A00-212認証試験 A00-212参考書
NO.9 Given the SAS data set SAUSER.HIGWAY:
SASUSER.HIGHWAY
The following SAS program is submitted:
%macro highway;
proc sql nonprint;
%let numgrp=6;
select distinct status into:group1-:group&numgrp from sasuser.highway;
quit;
%do i=1 %to &numgrp;
proc print data =sasuser.highway;
where status ="&&group&I";
run;
%end;
%mend;
%highway
How many reports are produced?
A. 2
B. 6
C. 0
D. 5
Answer: A
SASInstitute認定試験 A00-212参考書 A00-212 A00-212問題集 A00-212
NO.10 Which SET statement option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. NOBS=pointobs
B. OBS=pointobs
C. KEY=pointobs
D. POINT=pointobs
Answer: D
SASInstitute A00-212 A00-212過去問
NO.11 The following SAS program is submitted:
%let a=cat;
%macro animal(a=frog);
%let a=bird;
%mend;
%animal(a=pig)
%put a is &a;
What is written to the SAS log?
A. a is pig
B. a set cat
C. a is frog
D. a is bird
Answer: B
SASInstitute認証試験 A00-212過去問 A00-212参考書 A00-212参考書 A00-212問題集
NO.12 The following SAS program is submitted:
data temp;
length 1 b 3 x;
infile 'file reference';
input a b x;
run;
What is the result?
A. The data set TEMP is not created because variables A and B have invalid lengths
B. The data set TEMP is created, but variable X is not created
C. The data set TEMP is not created because variable A has an invalid length
D. The data set TEMP is created and variable X has a length of 8
Answer: C
SASInstitute問題集 A00-212 A00-212 A00-212認定資格 A00-212 A00-212認定資格
NO.13 The following SAS program is submitted:
%macro check(num=4);
%let result=%eval(&nm gt 5);
%put result is &result;
%mend;
%check (num=10)
What is written to the SAS log?
A. result is true
B. result is 10 gt 5
C. result is 1
D. result is 0
Answer: C
SASInstitute A00-212練習問題 A00-212
NO.14 CORRECT TEXT
The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
result is
result is 10
result is 10.5
result is 10+0.5
Answer: C
SASInstitute認定試験 A00-212 A00-212 A00-212 A00-212 A00-212
NO.15 The following SAS program is submitted:
Data sasuser.history;
Set sasuser.history(keep=state x y
Rename = (state=ST));
Total=sum(x,y);
Run;
The SAS data set SASUSER.HISTORY has an index on the variable STATE.
Which describes the result of submitting the SAS program?
A. The index on STATE is deleted and an index on ST is created
B. The index on STATE is recreated as an index on ST
C. The index on STATE is deleted
D. The index on STATE is updated as an index on ST
Answer: C
SASInstitute A00-212認定証 A00-212
NO.16 Which SQL procedure program deletes rows from the data set CLASS? A. proc sql;
Select * from class
Where age<(select stop_age from threshold);
Quit;
B. proc sql;
Modify table class
Delete where age<(select stop_age from threshold);
Quit
C. proc sql;
Delete from class
Where age<(select stop_age from threshold);
Quit;
D. proc sql;
Alter from class
Delete where age<(select stop_age from threshold);
Quit;
Answer: C
SASInstitute問題集 A00-212過去問 A00-212 A00-212
NO.17 When reading a SAS data file, what does the NOBS=option on the SET statement
represent?
A. A variable that represents the total number of observation in the output data set(s)
B. A variable that represents a flag indicating the end of the file
C. A variable that represents the total number of observations in the input data set(s)
D. A variable that represents the current observation number
Answer: C
SASInstitute問題集 A00-212参考書 A00-212
NO.18 The SAS data set WORK.TEMPDATA contains the variables FMTNAME, START and
LABEL and it consists of 10 observations.
The following SAS program is submitted:
Proc format cntlin=wor.tempdata;
Run;
What is the result of submitting the FORMAT procedure step?
A. It uses the WORK.TEMPDATA SAS data set as input to create the format
B. All formats created will be stored in two WORK.TEMPDATA SAS data set
C. An ERROR message is written to the SAS log because the program is incomplete
D. NO formats are created in this step
Answer: A
SASInstitute認定試験 A00-212 A00-212参考書 A00-212認定試験 A00-212
NO.19 Given the SAS data sets ONE and TWO:
The following SAS program is submitted:
Proc sql;
Select two.*,budget from one <insert JOIN operator here> two on one.year=two.year,
Quit;
The following output is desired:
Which JOIN operator completes the program and generates the desired output? A. FULL JOIN
B. INNER JOIN
C. LEFT JOIN
D. RIGHT JOIN
Answer: A
SASInstitute問題集 A00-212 A00-212認証試験 A00-212
NO.20 Which SAS procedure changes the name of a permanent format for a variable stored in a SAS data
set?
A. DATASETS
B. MODIFY
C. FORMAT
D. REGISTRY
Answer: A
SASInstitute A00-212 A00-212認証試験 A00-212 A00-212過去問