Avaya認証試験に参加する方はPass4Testの問題集を買ってください。成功を祈ります。


Avaya Avaya-Certification 6102-1

弊社が提供した問題集がほかのインターネットに比べて問題のカーバ範囲がもっと広くて対応性が強い長所があります。Pass4Testが持つべきなIT問題集を提供するサイトでございます。


6102-1試験はAvayaの認定試験の一つですが、もっとも重要なひとつです。Avaya6102-1の認定試験に合格するのは簡単ではなくて、Pass4Testは6102-1試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、Pass4Testから君に合ったツールを選択してください。


試験番号:6102-1問題集

試験科目:Avaya 「Avaya Virtual Services Platform 9000 Implementation Exam」

Pass4Testは最高な品質で最速なスピードでAvaya6102-1認定試験の資料を更新するサイトでございます。もしかすると君はほかのサイトもAvaya6102-1認証試験に関する資料があるのを見つけた、比較したらPass4Testが提供したのがいちばん全面的で品質が最高なことがわかりました。


現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、6102-1試験はAvayaの一つ重要な認証試験で、多くの人がAvaya認証されたくて試験に合格しなければなりません。


購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://pdf.pass4test.jp/6102-1.pdf


NO.1 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to
ensure that all of
the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF
redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D

Avaya   6102-1   6102-1問題集   6102-1   6102-1

NO.2 Which types of packets will port mirroring not capture.?
A. Packets that are dropped on the ingress MAC
B. Packets that are destined for the standby CP
C. Packets that are properly forwarded through the VSP
D. Packets that have a destination address of 255.255.255.255
Answer: A

Avaya   6102-1認定資格   6102-1参考書   6102-1問題集

NO.3 A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?
A. The traffic will be buffered until there is available bandwidth.
B. The excess traffic will be dropped randomly.
C. The excess traffic will be dropped based upon the mirror priority of the ingress port.
D. The excess traffic will be dropped based upon the port priority of the ingress port.
Answer: B

Avaya認証試験   6102-1練習問題   6102-1問題集   6102-1

NO.4 Which two management ports are available on the CP module? (Choose two.)
A. Serial interface
B. USB (host) interface
C. Ethernet interface
D. Modem interface
Answer: A,D

Avaya   6102-1   6102-1認証試験   6102-1認定試験   6102-1問題集

NO.5 Given the following ACL applied to an interface:
filter acl ace 1 5 name "xxxx" filter acl ace action 1 5 deny
filter acl ace ip 1 5 ip-protocol-type eq tcp
filter acl ace protocol 1 5 dst-port eq 23
filter acl ace 1 5 enable
What is the result of this filter?
A. permit telnet traffic
B. deny ftp traffic
C. permit only tcp traffic
D. deny telnet traffic
E. deny only tcp traffic
Answer: D

Avaya認定証   6102-1   6102-1練習問題

NO.6 Internet Group Management Protocol (IGMP) is used by the IP Multicast router, to
learn about the
existence of host group members on their directly attached subnets.
Which statement about IGMP is true?
A. The IP Multicast routers get this information by listening for IP hosts broadcasting IGMP
queries and
reporting their host group memberships.
B. The IP Multicast routers get this information by broadcasting IGMP queries and listening
for IP hosts
reporting their host group memberships.
C. The IP Multicast routers get this information by recognizing the modified MAC address of a
Multicast
packet and adding that MAC address to the Multicast tree.
D. The IP Multicast routers get this information by listening for Multicast Servers broadcasting
IGMP
queries and listening for IP hosts reporting their host group memberships.
Answer: B

Avaya   6102-1過去問   6102-1認定証

NO.7 A Split Multi Link Trunking (SMIT) for switch clustering is being configured.
Which statement is a configuration requirement for the SMIT?
A. The CP-Limit is configured on edge switch stacks.
B. VLANs that are defined on the SMLT are also defined on the tote IST.
C. Neighboring edge switch stacks should be connected to each other via the DMLT
connection to add
resilient paths in the event of an SMLT failure.
D. Alternate the primary path of the SMLT connection Lo load balance the switch core.
Answer: B

Avaya問題集   6102-1練習問題   6102-1参考書   6102-1認証試験   6102-1練習問題

NO.8 Which command can be used to determine the management IPv6 address on the
Virtual Services
Platform (VSP) O000?
A. Show interfaces mgmtEthernet 1/1
B. Show ip interface vrf mgmtRouter
C. Show ipv6 interface vrf mgmtRouter
D. Show ipv6 address interface
Answer: D

Avaya   6102-1   6102-1過去問   6102-1

NO.9 Avaya recommends that the Switch Fabric (SF) modules be installed in both Slot SF1
and Slot SF4.
What is the reason behind this recommendation?
A. It provides optimal load balancing between the SF modules.
B. It provides redundancy tor the bandwidth management.
C. It takes full advantage of the orthogonal midplane architecture.
D. It provides redundancy in case of a power supply failure.
E. It provides lossless SF failover.
Answer: B

Avaya問題集   6102-1   6102-1練習問題   6102-1過去問

NO.10 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in
the existing
Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the
VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new
VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new
VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new
VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP
address.
Answer: D

Avaya認定資格   6102-1   6102-1   6102-1問題集   6102-1参考書