今の社会の中で、ネット上で訓練は普及して、弊社は試験問題集を提供する多くのネットの一つでございます。Pass4Testが提供したのオンライン商品がIT業界では品質の高い学習資料、受験生の必要が満足できるサイトでございます。
Pass4Testを通じて最新のJuniperのJN0-332試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。
IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてJuniperのJN0-332試験に参加して認可を得たくて、Juniper のJN0-332試験が難度の高いので合格率も比較的低いです。JuniperのJN0-332試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。
試験番号：JN0-332問題集
試験科目：Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
購入前にPass4Testが提供した無料の問題集をダウンロードできます。自分の練習を通して、試験のまえにうろたえないでしょう。Pass4Testを選択して専門性の訓練が君の試験によいだと思います。
Pass4Testが提供したJuniperのJN0-332試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/JN0-332.pdf
NO.1 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D
Juniper認定資格 JN0-332認定資格 JN0-332 JN0-332
NO.2 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D
Juniper認定資格 JN0-332参考書 JN0-332問題集 JN0-332認定試験 JN0-332練習問題
NO.3 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A
Juniper認定資格 JN0-332認証試験 JN0-332 JN0-332
NO.4 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D
Juniper JN0-332 JN0-332 JN0-332過去問 JN0-332認証試験
NO.5 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A
Juniper認証試験 JN0-332 JN0-332 JN0-332
NO.6 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C
Juniper JN0-332問題集 JN0-332 JN0-332認定資格
NO.7 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A
Juniper過去問 JN0-332 JN0-332参考書 JN0-332 JN0-332認定資格 JN0-332参考書
NO.8 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D
Juniper認定資格 JN0-332 JN0-332 JN0-332
NO.9 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E
Juniper過去問 JN0-332 JN0-332 JN0-332 JN0-332認定資格 JN0-332
NO.10 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D
Juniper認定証 JN0-332認定資格 JN0-332参考書
NO.11 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D
Juniper認定証 JN0-332 JN0-332 JN0-332認証試験 JN0-332 JN0-332
NO.12 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D
Juniper練習問題 JN0-332 JN0-332 JN0-332過去問 JN0-332
NO.13 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D
Juniper JN0-332認定証 JN0-332 JN0-332 JN0-332
NO.14 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C
Juniper JN0-332参考書 JN0-332参考書 JN0-332過去問 JN0-332
NO.15 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C
Juniper練習問題 JN0-332 JN0-332 JN0-332
NO.16 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D
Juniper JN0-332 JN0-332 JN0-332
NO.17 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E
Juniper練習問題 JN0-332練習問題 JN0-332参考書 JN0-332
NO.18 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A
Juniper JN0-332認証試験 JN0-332過去問 JN0-332
NO.19 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B
Juniper認定資格 JN0-332認証試験 JN0-332 JN0-332認定試験
NO.20 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A
Juniper問題集 JN0-332 JN0-332 JN0-332