Pass4Testは頼りが強い上にサービスもよくて、もし試験に失敗したら全額で返金いたしてまた一年の無料なアップデートいたします。
Pass4Testは君の試験に合格させるだけでなく本当の知識を学ばれます。Pass4Testはあなたが100% で050-710試験に合格させるの保証することができてまたあなたのために一年の無料の試験の練習問題と解答の更新サービス提供して、もし試験に失敗したら、弊社はすぐ全額で返金を保証いたします。
現在の社会の中で優秀な人材が揃てIT人材も多く、競争もとても大きくて、だから多くのIT者はにIT関する試験に参加するIT業界での地位のために奮闘しています。050-710試験はNovellの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。
試験番号：050-710問題集
試験科目：Novell 「Novell Certified Linux Administrator」
Pass4Testの専門家チームが君の需要を満たすために自分の経験と知識を利用してNovellの050-710認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。
Pass4TestはNovellの050-710認定試験に便利なサービスを提供するサイトで、従来の試験によってPass4Test が今年のNovellの050-710認定試験を予測してもっとも真実に近い問題集を研究し続けます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/050-710.pdf
NO.1 You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
Novell認定資格 050-710 050-710問題集
NO.2 Which statements about the LVM components are correct? (Choose 2.)
A. A volume group is part of a logical volumE.
B. Logical volumes are grouped in a master group.
C. A volume group always consists of one physical volumE.
D. A physical volume can be a partition or an entire hard disk.
E. A volume group can be reduced in size by removing physical volumes.
F. The operating system accesses the volume groups like conventional physical partitions.
Answer: DE
Novell 050-710 050-710 050-710
NO.3 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
Novell 050-710過去問 050-710 050-710 050-710 050-710問題集
NO.4 Which command can you use to check an ext2/ext3 file system for a correct superblock, faulty data
blocks, or faulty allocation of data blocks?
A. df
B. du
C. fdisk
D. e2fsck
E. reiserfsck
Answer: D
Novell過去問 050-710問題集 050-710 050-710 050-710認定証
NO.5 How large is an inode?
A. 256 bits
B. 64 Kbytes
C. 128 bytes
D. 1 Mbyte
Answer: C
Novell 050-710 050-710 050-710
NO.6 You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
Novell問題集 050-710 050-710 050-710
NO.7 What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C
Novell 050-710認定資格 050-710
NO.8 Waht is the correct syntax for mounting the second partition of the first SCSI hard disk?
A. mount /mnt /dev/hda2
B. mount /dev/hda2 /mnt
C. mount /dev/sdb1 /mnt
D. mount /mnt /dev/sdb1
E. mount /dev/sda2 /mnt
F. mount /mnt /dev/sda2
Answer: E
Novell認証試験 050-710 050-710 050-710 050-710
NO.9 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: AEGH
Novell問題集 050-710 050-710参考書 050-710 050-710練習問題
NO.10 What is the correct order of steps to change the partition table using fdisk?
A. You can't use fdisk to change a partition tablE.
B. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Reboot.
C. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Load the
partition table from the boot prompt.
D. Start fdisk > Change the partition table > Write the partition table to floppy disk or USB stick > Exit
fdisk > Boot from floppy disk or USB stick.
Answer: B
Novell認証試験 050-710 050-710 050-710練習問題
NO.11 Which statements about partitions are correct? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition tablE.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
rangE.
Answer: ABC
Novell 050-710参考書 050-710 050-710
NO.12 Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
Novell過去問 050-710認定証 050-710認定資格 050-710認定証
NO.13 Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
Novell 050-710認定試験 050-710
NO.14 As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
Novell過去問 050-710 050-710 050-710練習問題 050-710過去問
NO.15 Which command can you use to create a Reiser file system on the sda6 partition? (Choose 2.)
A. mkreiserfs /dev/sda6
B. fdisk.reiserfs /dev/sda6
C. makE. reiserfs /dev/sda6
D. fdisk -t reiserfs /dev/sda6
E. mkfs -t reiserfs /dev/sda6
Answer: AE
Novell 050-710 050-710 050-710 050-710
NO.16 What information do you need to set up an LDAP client? (Choose 4.)
A. LDAP version
B. LDAP base DN
C. Kind of encryption
D. Synchronization frequency
E. Address of the LDAP server
F. File name of the LDAP database
Answer: ABCE
Novell過去問 050-710 050-710認定資格 050-710参考書
NO.17 Why are the noauto and users options used with /etc/fstab?
A. A normal user is not allowed to access this partition.
B. They allow any user to mount and unmount a partition.
C. They specify the partitions that are bootable by a user.
D. They specify the partitions that are not bootable by a user.
Answer: B
Novell 050-710認定試験 050-710認定証 050-710 050-710参考書
NO.18 Which are journaling file systems? (Choose 3.)
A. XFS
B. ext2
C. ext3
D. VFAT
E. minix
F. VFAT32
G. ReiserFS
Answer: ACG
Novell 050-710認定証 050-710 050-710
NO.19 Which command can be used to view the inode assigned to a filename?
A. ls -i
B. fsck -h -i
C. inode --list
D. cat /proc/inodes
Answer: A
Novell 050-710認証試験 050-710 050-710認定証 050-710
NO.20 In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer: