弊社は君の試験に合格させるとともにまた一年の無料の更新のサービスも提供し、もし試験に失敗したら全額で返金いたします。しかしその可能性はほとんどありません。弊社は100%合格率を保証し、購入前にネットでダウンロードしてください。
あなたはインターネットでEMCのE20-616認証試験の練習問題と解答の試用版を無料でダウンロードしてください。そうしたらあなたはPass4Testが用意した問題集にもっと自信があります。早くPass4Testの問題集を君の手に入れましょう。
Pass4Testは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
試験番号：E20-616問題集
試験科目：EMC 「Symmetrix Installation and Troubleshooting Specialist」
Pass4Testの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。
従来の試験によってPass4Test が今年のEMCのE20-616認定試験を予測してもっとも真実に近い問題集を研究し続けます。Pass4Testは100%でEMCのE20-616認定試験に合格するのを保証いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/E20-616.pdf
NO.1 A DMX-2 memory configuration containing four (4) memory boards is to be upgraded to larger size
cache boards. The upgrade results in a two (2) memory board configuration. How will the bandwidth of
the DMX-2 be affected by the upgrade?
A. Decreased by the smaller cache card count
B. Increased by the larger memory size
C. Unchanged, only memory size is affected
D. Will remain at the theoretical maximum
Answer: B
EMC認定試験 E20-616練習問題 E20-616認証試験 E20-616問題集 E20-616
NO.2 When is the relationship between a data volume and a BCV created?
A. When the BCV is created in the bin file
B. When the BCV is established
C. When the BCV is split
D. When the BCV is varied on
Answer: B
EMC過去問 E20-616 E20-616
NO.3 How is DPR enabled?
A. By the EMC z/OS Storage Manager
B. In the bin file
C. Inlines Command
D. On the host by z/OS
Answer: B
EMC E20-616 E20-616 E20-616認定証
NO.4 When looking at the DMX FA Back Adapter, you notice that one of the SFPs is blue. What does this
mean?
A. Long wave, multi mode port
B. Long wave, single mode port
C. Short wave, multi mode port
D. Short wave, single mode port
Answer: B
EMC認定証 E20-616 E20-616 E20-616
NO.5 On a DMX1000P, how many DAs are required?
A. 2
B. 4
C. 6
D. 8
Answer: B
EMC参考書 E20-616認定証 E20-616 E20-616 E20-616問題集
NO.6 What is a difference between a Symmetrix 8830 and a DMX-2?
A. An 8830 24-slot card cage is scalable
B. Disks on a DMX-2 are FC-AL
C. DMX-2 uses a cache interconnect multi-drop bus
D. Maximum system bandwidth on an 8830 is 16Gb/s
Answer: B
EMC認証試験 E20-616 E20-616 E20-616練習問題
NO.7 A customer wants to change Host Directors to support SRDF. What distinguishes one director type
from another within a Symmetrix 8000 series?
A. Director model number
B. Director revision
C. Emulation code
D. Enginuity code level
Answer: C
EMC E20-616 E20-616認定試験 E20-616参考書 E20-616練習問題
NO.8 When will a customer's host be able to access the data on a BCV?
A. After the BCV is established
B. After the BCV is split
C. When the BCV is created in the Bin
D. While the BCV is syncing with the data volume
Answer: B
EMC E20-616参考書 E20-616問題集 E20-616認定試験
NO.9 Click the exhibit button.
The customer has handed you this service alert error message. What is the error?
A. Alarm signal set
B. PC failed to call home due to communication problems
C. Temperature problems
D. Mirror device is not ready at time of periodic test
Answer: D
EMC E20-616 E20-616
NO.10 Which component of a DMX-2 performs Front End, director-to-director communications?
A. CCM
B. ECM
C. LCC
D. PBC
Answer: A
EMC問題集 E20-616練習問題 E20-616 E20-616認定試験 E20-616認定資格
NO.11 A service processor fails to communicate with directors 1 through 8 in the DMX-2 series. Which
component can cause this failure?
A. CCM0
B. ECM0
C. ECM1
D. XCM
Answer: A
EMC認定資格 E20-616 E20-616認定試験 E20-616問題集 E20-616 E20-616
NO.12 Click the exhibit button.
You are viewing the rear of the DMX1000 card cage. Which card is CCM0?
A. A
B. B
C. C
D. D
Answer: D
EMC E20-616 E20-616
NO.13 Click the exhibit button.
You are viewing the rear of the DMX1000 card cage. Which card is ECM1?
A. A
B. B
C. C
D. D
Answer: B
EMC E20-616練習問題 E20-616 E20-616 E20-616認定資格
NO.14 What does the Interleave Service Policy manage during a read operation?
A. Reads the tracks from M1 and M2 randomly
B. Reads the tracks from M1 and M2 alternatively
C. Reads the tracks only from M1
D. Tracks measurements of I/O on logical volumes and chooses the appropriate mirror
Answer: B
EMC認証試験 E20-616認定証 E20-616過去問
NO.15 Which type of Symmetrix volume contains information on the dynamic mirror policy decisions, error
logging, event traces, code image storage, and a dedicated lost write area?
A. BCV
B. Data
C. DRV
D. SFS
Answer: D
EMC E20-616 E20-616認定資格 E20-616
NO.16 A customer wants to set up an FA port for a 10km distance connection. Which optic mode will meet the
customer's need?
A. Long wave, Fibre Multi Mode port
B. Long wave, Fibre Single Mode port
C. Short wave, Fibre Multi Mode port
D. Short wave, Fibre Single Mode port
Answer: B
EMC認定資格 E20-616 E20-616 E20-616練習問題
NO.17 A customer's AC power fails to a Symmetrix 8430/8530. In this case, which components will the
battery subsystem sustain?
A. Card cage and disks
B. Communication cards and service processors
C. Disk drives and memory
D. Memory cards and service processor
Answer: A
EMC問題集 E20-616 E20-616認定資格 E20-616参考書
NO.18 What is a major difference in director data flow between the Symmetrix 8000 series and a DMX-2?
A. An 8430 uses loop redundancy
B. An 8530's directors are connected to two data busses
C. Directors in a DMX-2 are connected to top high and bottom low
D. DMX-2 port bypass cards are connected directly to cache
Answer: B
EMC E20-616 E20-616 E20-616過去問
NO.19 All the memory slots in a DMX-1000 are occupied. In this case, what is run from the procedure Wizard
to perform Memory Replacement?
A. Add Memory Board script to the Universal slot script, run Replace Memory Board Script, and replace
that board
B. Remove Memory Board script first and then Add Memory Board Script
C. Replace Memory Board script
D. Upgrade Memory Board script
Answer: B
EMC練習問題 E20-616問題集 E20-616認証試験 E20-616 E20-616問題集
NO.20 Click the exhibit button.
You are viewing the rear of a Symmetrix DMX22000/3000 Card Cage. Where will you find ECM1?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC E20-616 E20-616 E20-616問題集 E20-616練習問題