Pass4Testを選択したら、成功が遠くではありません。Pass4Testが提供するEMCのE20-597認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。
弊社のIT業で経験豊富な専門家たちが正確で、合理的なEMC E20-597認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。
弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてEMCのE20-597認定試験の受験生が最良の選択であり、成功の最高の保障でございます。
試験番号：E20-597問題集
試験科目：EMC 「Backup and Recovery Specialist Exam for Storage Administrators」
Pass4Testが提供した問題集をショッピングカートに入れて100分の自信で試験に参加して、成功を楽しんで、一回だけEMCのE20-597試験に合格するのが君は絶対後悔はしません。
弊社は君の試験に合格させるとともにまた一年の無料の更新のサービスも提供し、もし試験に失敗したら全額で返金いたします。しかしその可能性はほとんどありません。弊社は100%合格率を保証し、購入前にネットでダウンロードしてください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://pdf.pass4test.jp/E20-597.pdf
NO.1 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B
EMC練習問題 E20-597 E20-597 E20-597 E20-597認証試験 E20-597認定資格
NO.2 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C
EMC問題集 E20-597参考書 E20-597認定試験 E20-597 E20-597認定資格
NO.3 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D
EMC E20-597 E20-597 E20-597 E20-597認定試験
NO.4 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D
EMC参考書 E20-597 E20-597 E20-597 E20-597問題集
NO.5 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A
EMC E20-597 E20-597過去問 E20-597
NO.6 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A
EMC過去問 E20-597 E20-597
NO.7 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C
EMC E20-597認定試験 E20-597認定試験 E20-597認証試験 E20-597問題集
NO.8 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C
EMC過去問 E20-597認定試験 E20-597
NO.9 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A
EMC E20-597 E20-597 E20-597
NO.10 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D
EMC E20-597認定試験 E20-597 E20-597参考書
NO.11 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A
EMC E20-597 E20-597練習問題 E20-597 E20-597練習問題
NO.12 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B
EMC過去問 E20-597認定試験 E20-597練習問題 E20-597問題集
NO.13 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B
EMC練習問題 E20-597 E20-597認定証
NO.14 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A
EMC問題集 E20-597 E20-597 E20-597参考書
NO.15 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D
EMC認定資格 E20-597認証試験 E20-597過去問 E20-597認定証