CG FC200 ECU Programmer Performs Full Backup of 2020 Peugeot Partner MD1CS003 EEPROM and Flash on Bench
CG FC200 ECU Programmer successfully performed a full backup of the 2020 Peugeot Partner MD1CS003 ECU’s EEPROM and Flash data, without the need to open or physically access the unit. This particular ECU model is the BOSCH MD1CS003 TC298TP.
Equipment Used:
- CG FC200 ECU Programmer, fully equipped with all licenses activated.
Operation Process:
1. Began by viewing the wiring diagram in the FC200 software.
2. Following the diagram, we established the connection between the FC200 programmer and the ECU using the professional car-grade wiring harness provided in the FC200 kit.
3. Next, we connected the FC200 to a laptop using a USB cable and ensured that the programmer was powered.
4. Launched the FC200 software and selected the corresponding ECU model to access the operation interface.
5. By clicking the “Identify” function, the FC200 intelligently identified the ECU communication and wiring connections while simultaneously reading out the ECU information.
6. Then, with a simple click on “Read EEPROM” and “Read Flash,” we sequentially read and backed up the necessary data.
7. The entire process was completed smoothly and efficiently within just 4 minutes.
Our client expressed complete satisfaction with the ease and speed of the operation. With CG FC200 ECU Programmer, we were able to accomplish the task flawlessly, providing a successful full backup of the 2020 Peugeot Partner MD1CS003 ECU’s EEPROM and Flash data on the bench.