Sewage Treatment Plant Manufacturer in Gurgaon for Manufacturing Industries
Gurgaon is an important business and industrial hub in Haryana. There are several industries set up here, including corporate offices and commercial areas. Auto-components, engineering, garments, and ornamental lighting are a few of the industry types within this area. The MSME department has listed several dedicated clusters for auto-components, garment manufacturing, and ornamental lighting within Gurugram. These industries provide jobs in the local area.
Water is used during the manufacturing process for cleaning, cooling, surface treatments, and production. It can contain oil, greases, chemicals, dyestuffs, and suspended solids. If this is discharged untreated, it can cause damage to drains, soil, and water sources. A sewage treatment plant will allow for the water to be treated to meet any relevant discharge requirements and/or be considered for reuse.
Employing a reputable sewage treatment plant manufacturer is important for factories wishing to treat their water responsibly. Netsol Water is a leading provider of sewage treatment plants in Gurgaon for manufacturing industries.
Why Manufacturing Industries Need a Suitable Sewage Treatment Plant
During the manufacturing process there will be several types of waste water. As such, an ETP must be chosen based on the type of pollutants within the water. Below are the reasons why you need a well-planned ETP.
1. Industrial Waste Water Treatment
Automotive component and engineering units can produce wastewater that contains oil, grease, metal particles, and cleaners. Garment units can release colored water, detergents, and fiber, while food or chemical factories can produce high organics and varying pH.
To ensure the correct treatment is undertaken, a designer should take samples from where the wastewater is generated. The samples will be tested to find out the flow rate, pH, chemical oxygen demand, biological oxygen demand, and suspended solids. Based on this information, the correct level of treatment can be determined. Large items will be removed through screening. Free oil will be removed through oil separation. Equalisation will be used to balance the flow. The remaining pollutants will be removed using chemical or biological treatment.
2. Pollution Control and Water Reuse
The waste water will be treated to ensure that the unit can discharge correctly according to the conditions of the site and the industry. The Haryana State Pollution Control Board(HSPCB) has published information on the sewage requirements for different industries and explained the consent process under the Water Act. Factories should check what conditions they have to meet when applying for consent.
A good ETP will have sections to treat and monitor the water. This means that operators can check that the unit is working properly and identify any issues. A good ETP will also allow for the water to be reused for specific non-potable uses such as floor cleaning, gardening, or specific process requirements. This will depend on the quality of the water. A reuse scheme should be put into place to ensure that each use has been defined and the quality of water required. This can reduce the amount of clean water needed and reduce the amount of waste water being discharged.
What to Expect from a Reputable ETP Manufacturer
An ETP project requires the manufacturer to know the process, wastewater, space, and daily requirements. A reliable project should include:
1. Design of Process
The design should take into consideration the daily flow rate, peak flow rate, hours of operation, and materials used. Lab tests will be carried out to identify pollutants and ensure the correct order of treatment. Based on the lab results, the process could include screening, equalization, pH adjustment, oil removal, coagulation, biological treatment, clarification, and filtration.
2. Installation and Operation
As well as designing a good ETP, it is important that it is installed and operated regularly. The manufacturer should ensure that all the equipment is placed correctly, piped, and wired. During commissioning, each unit should be tested to ensure it is working correctly.
Operators should be trained on how to use the equipment. They should know how to test the pH levels, add chemicals, and record flows and common issues. The equipment should be clearly labelled and have a maintenance schedule. Regular checks should be carried out on the pumps, blowers, mixers, and filters to reduce the chance of failure. The factory should also have a suitable sludge handling route, spares, and technical support. A reliable supplier should be able to advise on changes to the waste water quality and production levels.
Conclusion
Responsible waste water management can help manufacturing industries protect the environment and ensure consistency within their operation. A suitable ETP should be chosen based on the waste water produced by the factory and any requirements for discharge/reuse. Consider the design, installation, and after-sales support. Netsol Water can provide solutions for industrial waste water. Contact our team to discuss your requirements and get advice from an experienced sewage treatment plant manufacturer in Gurgaon.
Contact Netsol Water
· Phone: +91-9650608473
· Email: enquiry@netsolwater.com
