MYSV-I Servo ampllifier
1) BOX Type Control amplifier ,
2) the AC 220 V Power ,
3) Provides DC±15V and DC﹢5V , the DC﹢5V is for power of Digital ammeter.
4) with a choseable current,
5) It can show servo valves' current value without vibration signal by Digital display.
6) Convenient operate on panel .
7) Be used for closed loop controlling,also for open-loop controlling.
8) Input signal and feedback signal will be amplified and then be to the Adder, and then after the
driven stage amplified, then driving the Servo valve.
9) It can add the appropriate flutter signal.
10) More other technology requests optional.
MYSV-II Servo ampllifier
1) BORAD-Type control amplifier with a small size ,
2) Be installed in Electric control box(Similar like MYSV-I principle)
3) Adops 24V DC Power supply ,
4) The output current is optional with dither signal output,
5) It can output ±15V DC power for external sensor.
6) More technology requests optional.
MYSV-PI Servo ampllifier
1) It has a flexible and optional control method, Specifically as Proportional (P) control, Integral(I) control, Proportional-Integral(PI) control.
2) Three channel input, Voltage or Current's output ,
3) Many aspects adjusted by setting the DIP switch,
4) 24V DC power supply,
5) Mounted as card-board,
6) The output current is optional
7) The Vibratos amplitude can be adjustable.
8) More technology requests optional.