アナモフィックレンズの特徴といえば、縦方向に伸びるボケ味フレア感であり、

一般的なレンズと違う味を出すためにシネマやCMで使われています。

 

このうちボケについては、なんで縦方向になるのか不思議に思う人が多いと思います。

私も同僚に何回か聞かれたことがあります。

てっとり早く説明しようと、ぐぐったものの、解説しているサイトがなかったので、簡単に紹介します。

(ある程度、レンズに明るい人を想定していますので、前提知識を説明していなところが多々あります。ご了承ください)
 

 

 

1.まずは普通のレンズのボケについて考えよう

わかりやすいように画像の中心に発生するボケを想像しましょう。

ここではF1.4など開放状態だと思ってください。

その場合、基本的な形状は「真円」になるはずです。

 

2.普通のレンズをFnoを暗くして絞ったときのボケを考えましょう

そうすると、絞り羽根の形状に近いボケになって、多角形の形になりますね。

これは、絞り羽根で光線がケラれたために、このような形になります。

 

3.もしも絞り羽根の形状が楕円ならどうなる?

では、絞りの形状が楕円ならどうなるでしょうか?

絞り羽根と同じように光線がケラれるために、ボケも楕円になります。

 

4.アナモフィックレンズの構成を思い出そう

アナモフィックレンズは縦横の倍率が違います。

そのため、レンズを前から覗くと真円ではなく楕円形状のレンズ形状で作られます。

そうすると、この楕円形状であることによって、そもそもボケの形状が楕円形状になります。

 

5.アナモフィックレンズの倍率を考慮して考えると

そもそもレンズの形状が楕円になっているため、ボケは楕円形状になる。

さらにアナモの効果で圧縮されて、ボケ形状がさらに楕円形状になる。

そして、編集時には圧縮されていた画を引き伸ばすだけであるため、

ケラれが原因で縦長の楕円形状のボケは、真円にはならずに楕円形状となる。

 

 

以上が説明となります。

 

 

書いていても少しわかりにくいところが多い気がします。

時間があるときに少しずつ推敲したいと思います。

 

 

------------------------

こちらのサイトの写真を参考にすると、より理解が深められると思います。

B&H/Anamorphic Lenses: The Key to Widescreen Cinematic Imagery

 

PRONEWS/[新世紀シネマレンズ漂流:もの作りの現場から]Vol.05 FUJINONのMK50-135mm T2.9に最適化されたSLR Magic Anamorphot-65 1.33x Anamorphic Adapter試用レポート

 

 

参考程度に見つけたサイトを貼り付けておきます。

[DigitalGang!]Shoot.25 アナモフィックレンズが熱い!

 

フォトマスター検定予想問題 「アナモフィックレンズ」ってどんなレンズ?

 

 

 

The characteristics of anamorphic lenses are bokeh and flare that stretch in the vertical direction, and they are used in cinema and commercials to give a different taste to ordinary lenses.
Of these, many people wonder why the vertical direction is caused by blur.
I have been asked several times by a colleague.
Although I tried to explain it quickly, there was no site that explained it, so I will introduce it briefly.
(Because some people who are familiar with lenses are assumed, there are many places that do not explain the prerequisite knowledge.

1. First, let's think about the blur of ordinary lenses
Imagine blurring in the center of the image for clarity.
Think of it as open here, such as F1.4.
In that case, the basic shape should be a “perfect circle”.

2. Let's consider the blur when a normal lens is squeezed with the Fno darkened
Then, it becomes bokeh close to the shape of the aperture blade, and it becomes a polygonal shape.
This is due to the vignetting of the rays by the aperture blades.

3. What if the shape of the aperture blade is elliptical?
So what happens if the aperture shape is elliptical?
Since the rays are vignetted in the same way as the aperture blade, the bokeh also becomes elliptical.

4. Let's recall the configuration of the anamorphic lens
Anamorphic lenses have different vertical and horizontal magnifications.
Therefore, if you look into the lens from the front, it will be made with an elliptical lens shape instead of a perfect circle.
Then, because of this elliptical shape, the shape of the blur will be elliptical in the first place.

5. Considering the magnification of the anamorphic lens
In the first place, since the shape of the lens is elliptical, the blur becomes elliptical.
Further, the image is compressed by the effect of the anamo, and the blur shape becomes further elliptical.
And when editing, it just stretches the compressed image,
A vertically long elliptical blur due to vignetting is not a perfect circle but an elliptical shape.


This is the explanation.

I feel that there are many places that are a little difficult to understand even when writing.
I want to elaborate little by little when I have time.

------------------------

I think you can deepen your understanding by referring to the photos on this site.
 

B&H/Anamorphic Lenses: The Key to Widescreen Cinematic Imagery

 

PRONEWS/[新世紀シネマレンズ漂流:もの作りの現場から]Vol.05 FUJINONのMK50-135mm T2.9に最適化されたSLR Magic Anamorphot-65 1.33x Anamorphic Adapter試用レポート

 

Paste the site you found for reference only.

[DigitalGang!]Shoot.25 アナモフィックレンズが熱い!

 

フォトマスター検定予想問題 「アナモフィックレンズ」ってどんなレンズ?





变形镜片的特征是在垂直方向上延伸的散景和眩光,它们被用于电影院和商业广告中,以赋予普通镜片不同的味道。
其中,许多人想知道为什么垂直方向是由模糊引起的。
一位同事多次问我。

尽管我试图快速解释它,但是没有网站对此进行解释,因此我将简要介绍它。
(因为假定了一些熟悉镜头的人,所以很多地方没有解释先决条件知识。

1.首先,让我们考虑一下普通镜头的模糊
想象一下,为了清晰起见,图像中心出现了模糊。
认为它在这里是开放的,例如F1.4。
在这种情况下,基本形状应为“完美的圆”。

2.让我们考虑在Fno变暗的情况下挤压普通镜头时的模糊
然后,它变成接近光圈叶片形状的散景,并且变成多边形形状。
这是由于光圈叶片使光线渐晕所致。

3.如果光圈叶片的形状为椭圆形怎么办?
那么,如果光圈形状为椭圆形会怎样?
由于光线以与光圈叶片相同的方式渐晕,因此散景也变为椭圆形。

4.让我们回想一下变形镜头的配置
变形镜头的垂直和水平放大率不同。
因此,如果您从正面看镜头,它将以椭圆形的镜头形状而不是完美的圆形拍摄。
然后,由于这种椭圆形,模糊的形状首先将是椭圆形的。

5.考虑变形镜头的放大倍数
首先,由于透镜的形状是椭圆形的,所以模糊变成椭圆形。
此外,图像在anamo的作用下被压缩,并且模糊形状变得进一步椭圆。
在编辑时,它只是拉伸压缩的图像,
由于渐晕而导致的垂直长椭圆模糊不是完美的圆形,而是椭圆形状。


这就是解释。

我觉得即使在写作时,也有很多地方很难理解。
有空的时候我想一点一点地阐述。

 

我认为您可以参考本网站上的照片来加深了解。

B&H/Anamorphic Lenses: The Key to Widescreen Cinematic Imagery

 

PRONEWS/[新世紀シネマレンズ漂流:もの作りの現場から]Vol.05 FUJINONのMK50-135mm T2.9に最適化されたSLR Magic Anamorphot-65 1.33x Anamorphic Adapter試用レポート

 

粘贴您发现的站点仅供参考。

[DigitalGang!]Shoot.25 アナモフィックレンズが熱い!

 

フォトマスター検定予想問題 「アナモフィックレンズ」ってどんなレンズ?