killtestのHP0-759問題集
は最新版で、killtestの問題集
は世界中権威的な専門家が作りあがった作品でございます、100%気楽に合格することが保証いたします。
killtestはHP0-759問題集を提供し、無料ダウンロート、弊社は一年以内無料更新版のサービスを提供いたします、弊社の問題集は本格テストとすごく近いし、合格率は100%でございます。
試験の名称: HP ProCurve Combined Security and Mobility Exam
問題と解答: 85 Q&As
価格(日本円): ¥ 8900.00 ¥ 2900.00 JPY
更新: Jan-15-2010
1. 100%の本格的な試験問題集は過去の試験問題及び最新模擬試験問題から作られたものです。
2. 業界最先端の模擬試験ソフトは実際の試験雰囲気を模擬したものです。
3. 全試験科目は常時最新化され、最新の試験内容まで織込む精確性が有ります。
4. 高価な講座を受ける必要はなく、10~20時間の独学だけで、一発合格が可能です!
5. Exhibits、Drag&Drop、Simulationには実際に行われた試験の様式を全て含めております。
6. 提供可能なバージョンは英語版と日本語版があり、日本語版は日本国内IT資格認定試験に準ずるものです。
7. すべての試験科目は一度お買い上げ頂ければ、問題集は一生無償更新できます!
8. 90日以内で試験が失敗したら、全額返却いたします!
9. 毎日24時間インタネット上で技術サービス(無料)を提供致します。
10. インタネットにてお支払い頂くと、即時にダウンロードすることができ、無料配送され、待つことはございません。
HP0-759
1.Which actions should be taken to test access point coverage during a site survey? Select
THREE.
A.Temporarily install an access point to test and measure signal to noise ratio levels.
B.Use a wireless enabled portable device running an SNR analyzer tool.
C.Configure all access points to use the same channel and enable bridge mode operation on all access
points. Test connectivity and roaming once the site AP's are setup in bridge mode.
D.Enable and verify 802.1X security to insure proper signal encryption and strength.
E.Configure overlapping cells using non-overlapping channels and test for coverage.
F.Configure WEP keys on client and access points.
G.Configure a WDS link between two access points.
Correct:A B E
2.Site surveys are best done at the pre-sales stage in order to provide a customer with a rough
estimate of what their investment will be. What are some important results derived from a site
survey? Select TWO.
A.How far should the APs be spaced apart (what cell size is needed)?
B.Are there available dedicated power circuits for AP usage to limit noise feedback?
C.Base estimated cell radius of 33 meters supporting 60-90 users at 5.5 Mbps aggregate bandwidth.
D.How many APs will be required in a given area (cell density)?
E.Use an Ultrasonic Wave Analyzer to test signal to noise ratio for proper placement of access points.
Correct:A D
3.Clients A and B attempt to communicate with access point C at the same time and a collision
occurs because they cannot detect each other's transmissions. Which problem does this
illustrate?
A.fast transform
B.retransmission
C.key mis-match
D.hidden client
Correct:D
4.Given the complicated nature of wireless bridging, what must be considered before
implementation? Select THREE.
A.auto channel select must be enabled
B.circular links require spanning tree to be set
C.WDS links need to be set to same frequency channel
D.multiple hop links need to be reduced to less than three
E.multiple hop links may lead to long end-to-end latency figures
F.circular links can create IP loops leading to increased performance
G.WDS links need to be set to alternating frequency channels using 1, 6 and 11
Correct:B C E
5.Click the Exhibit button. A customer is located on the top floor of a three-story building. The
second floor already has an existing 802.11b network using channels 1, 6 and 11. The customer on
the third floor wants to install an 802.11b network and requires three access points. Which
channels should be used for the three access points? Select TWO.
A.AP-A: channel 1, AP-B: channel 6 and AP-C: channel 11
B.AP-A: channel 7, AP-B: channel 8 and AP-C: channel 9
C.AP-A: channel 11, AP-B: channel 1 and AP-C: channel 6
D.AP-A: channel 2, AP-B: channel 3 and AP-C: channel 4
E.AP-A: channel 6, AP-B: channel 11 and AP-C: channel 1
Correct:C E
6.What is the valid range for client VLAN IDs on a ProCurve 420?
A.1-64
B.1-128
C.1-2048
D.1-4095
Correct:D
7.Two wireless stations are located in close proximity to the same access point. Which
mechanisms prevent them from transmitting at the same time? Select TWO.
A.CSMA-CD
B.SYN/ACK
C.CSMA-CA
D.MAC/LLC
E.RTS/CTS
Correct:C E
8.While probing a wireless network using the wireless client utility on you computer, you can see
that several different SSIDs are shown to be available. Which procedure has your wireless card
just performed?
A.a passive scan
B.a WPA PSK refresh
C.an active scan
D.a WEP key refresh
Correct:C