Juniper QFX5130-32CD-D-AFI: Sourcing Brief


Why teams spend time on Juniper QFX5130-32CD-D-AFI before the PO


Juniper QFX5130-32CD-D-AFI product image


Juniper QFX5130-32CD-D-AFI is listed under listed series as network / IT hardware. This long-form note is written for IT buyers and network engineers who need a careful fit check before a purchase order—not a brochure. Every hard claim below is limited to identity and description fields on the linked product page; missing numbers stay marked as unconfirmed.


Product Overview The QFX5130-32CD-D-AFI is a high-density 1 U top-of-rack switch featuring 32 400GbE ports in a low-profile form factor, designed for demanding data center environments. It supports Junos OS Evolved starting from release 20.3R1-EVO. Architecture & Performance This fixed-configuration switch delivers wire-rate 400GbE performance suitable for spine and leaf deployments. The high-speed ports support a wide variety of configurations for flexible data center networking. Chassis & Physical Design Compact rack-mountable design optimized for space-constrained installations, with precise dimensions and robust build for reliable operation.



Verified product identity



  • Brand: Juniper

  • Model / SKU: QFX5130-32CD-D-AFI

  • Product code (MPN): QFX5130-32CD-D-AFI

  • Series: listed series

  • Product type: network / IT hardware

  • Configuration: as listed

  • Condition on listing: Original New

  • Ordering role: Main SKU


Current supplier listing for configuration and availability: Juniper QFX5130-32CD-D-AFI.



What the listing actually asserts



  • Product Overview The QFX5130-32CD-D-AFI is a high-density 1 U top-of-rack switch featuring 32 400GbE ports in a low-profile form factor, designed for demanding data center environments. It supports Junos OS Evolved starting from release 20.3R1-EVO. Architecture & Performance This fixed-configuration switch delivers wire-rate 400GbE performance suitable for spine and leaf deployments. The high-speed ports support a wide variety of configurations for flexible data center networking. Chassis & Physical Design Compact rack-mountable design optimized for space-constrained installations, with precise dimensions and robust build for reliable operation.

  • Condition: Original New


Anything not listed above—throughput tables, MAC scale, exact PoE watts, dimensions, noise, or software feature matrices—should be treated as unconfirmed for this article. Prefer to re-open the live product page when the project needs those fields.




Additional product-page detail


Resources Company Open cart Home / Networking / Switches / Juniper QFX Series / QFX5130-32CD-D-AFI Brand Juniper 5 Verified QFX5130-32CD-D-AFI Model (MPN) QFX5130-32CD-D-AFI SKU QFX5130-32CD-D-AFI Condition Factory Sealed Original Packaging (NIB) Out of Stock Key Specifications Full Product Name QFX5130-32CD Switch OS Supported Junos OS Evolved First OS Release Supported 20.3R1-EVO Fixed/Modular Chassis? Fixed Form Factor 1 U Chassis Height 1.72 in / 4.3688 cm Your Price Call for Pricing Volume discounts available Availability Out of Stock Get Global Discount Need configuration help? Our CCIE certified engineers can help you verify compatibility.


Secure Payment VISA Pay WIRE Fast Dispatch Global logistics network aiming for same-day handover.


The QFX5130-32CD-D-AFI is a high-density 1 U top-of-rack switch featuring 32 400GbE ports in a low-profile form factor, designed for demanding data center environments. It supports Junos OS Evolved starting from release 20.3R1-EVO.


This fixed-configuration switch delivers wire-rate 400GbE performance suitable for spine and leaf deployments. The high-speed ports support a wide variety of configurations for flexible data center networking.



Role fit and architecture notes



Based on the listed product class, buyers typically evaluate this SKU for:



  • Access or aggregation roles where the printed port layout matches closet density

  • Non-PoE designs unless a different PoE SKU is selected on purpose

  • Copper-first designs unless uplinks are confirmed elsewhere on the page

  • Rollouts that need a stable, orderable SKU string across multiple sites


The verified listing text does not present PoE. Do not infer PoE from series naming habits in the market. If powered endpoints are required, select a PoE-marked SKU deliberately.


Port layout on the listing: see product page port listing. If uplinks are not explicit, do not invent QSFP/SFP counts—confirm on the live page before design sign-off.



Port, power, and cabling decision tree


Use this sequence before you approve quantities:



  1. Copy the exact model string and product code into the design BOM and the purchase requisition side by side.

  2. Count copper and optical interfaces against day-1 endpoints plus a documented growth reserve (for example 20–30% empty ports in dense closets).

  3. Decide media: Cat5e/Cat6/Cat6A for multi-gig copper; OS2/OM3/OM4 and approved optics for fiber uplinks.

  4. Power path: Confirm inlet type, redundant supply needs, and rack PDU capacity against the physical unit you will rack.

  5. Thermal and depth: reserve blanking panels and airflow direction consistency even when the page omits exact BTU numbers.

  6. Management path: out-of-band Ethernet or console access should be drawn on the rack elevation before install day.



Configuration questions procurement should force engineering to answer



  • Is the ordered string exactly QFX5130-32CD-D-AFI / QFX5130-32CD-D-AFI, with no missing -P/-HP/-E/-QA suffix from a sibling SKU?

  • Which features are mandatory on day-1 versus nice-to-have, and which of those are actually evidenced on the product page?

  • What is the uplink handoff speed and media to the next layer, and who owns the optic BOM?

  • Are licenses, support years, or maintenance phrases embedded in the product name already priced into the line item?

  • What is the RMA and spares strategy: cold spare per site, or N+1 for multi-closet campuses?

  • Who validates firmware baseline and golden config before the change window?



Deployment and rollout narrative


A low-risk rollout for Juniper QFX5130-32CD-D-AFI looks less like “unbox and patch” and more like a short controlled project:



  1. Lab or pilot: stage one unit with the same cabling plant and uplink type planned for production. Capture boot time, default management address behavior, and any first-login prompts.

  2. Image and config: store a baseline configuration template versioned in your repository. Avoid hand-built snowflake units across sites.

  3. Physical install: label front ports and rear power feeds; photograph serial labels for the CMDB on the same day as racking.

  4. Link validation: verify every uplink, LAG/MLAG if used, and PoE negotiation for the first bank of endpoints before declaring success.

  5. Cutover: schedule during the agreed change window with a rollback that re-homes endpoints to the previous edge device or temporary switch.

  6. Hypercare: watch error counters, power draw, and user tickets for 48–72 hours; only then close the change.



Buying checklist (copy into the ticket)



  • Exact model and product code recorded in BOM and PO

  • Live product page re-checked for the wording that justified the buy

  • Port math signed by network design owner

  • Power, rack unit, and airflow constraints signed by data-hall / closet owner

  • Optics / DAC / AOC list attached when SFP or multi-rate uplinks are in play

  • Support / RMA path and serial capture process defined

  • Pilot quantity vs full rollout quantity decided with dates

  • Firmware and baseline config ownership named




Product-page Q&A worth capturing in the RFQ



  • What is the port configuration of QFX5130-32CD-D-AFI? 32 x 400GbE ports in QSFP-DD form factor.

  • What operating system does the QFX5130-32CD-D-AFI support? Junos OS Evolved starting from 20.3R1-EVO.

  • What are the physical dimensions of the QFX5130-32CD-D-AFI? 1.72 in (H) x 17.26 in (W) x 21.1 in (D) / 4.3688 cm x 43.8404 cm x 53.594 cm.

  • Does QFX5130-32CD-D-AFI support EVPN-VXLAN? Yes, supported via Junos OS Evolved.



How to use the product page during negotiation


Keep the conversation anchored to the same SKU everyone can open: Juniper QFX5130-32CD-D-AFI. When a quote uses a slightly different model string, stop and reconcile before price discussions continue. Ask suppliers to quote model + product code together, to state condition (Original New), and to confirm whether accessories implied by the description are included or sold separately.


For multi-site buys, freeze one golden line item and replicate it. Mixing near-sibling SKUs across buildings is a common source of asymmetric PoE, uplink, or licensing behavior that only appears after install.



Risk register specific to this SKU class



  • Identity risk: long model names and CMCTO-style strings get truncated in ERP fields—preserve the full code.

  • Assumption risk: series reputation is not a substitute for the port map on this page.

  • Lead-time risk: if availability moves, re-validate that the replacement SKU is not a different power or uplink profile.

  • Integration risk: management tooling, AAA, and telemetry agents should be tested on the pilot unit.

  • Documentation risk: if installers only receive a price list line, they will guess; attach this checklist to the work order.



Closing notes for the purchase decision


Juniper QFX5130-32CD-D-AFI is a good candidate only when the verified identity and interface story match the design you intend to operate for the next hardware cycle. Use the linked product page as the shared source for model string, product code, and description text; keep unlisted performance claims out of the purchase justification until they are confirmed by your own design package. Order deliberately, pilot once, then scale the same SKU.