H3C H3CUS106C-PV2: Procurement Guide


Why teams spend time on H3C H3CUS106C-PV2 before the PO


H3C H3CUS106C-PV2 is listed under H3C Aolynk Product as Ethernet Switch. This long-form note is written for IT buyers and network engineers who need a careful fit check before a purchase order—not a brochure. Every hard claim below is limited to identity and description fields on the linked product page; missing numbers stay marked as unconfirmed.


H3C H3CUS106C-PV2 Ethernet Switch. H3C US106C-P V2 Ethernet Switch (6FE, Iron Shell, PoE 65W, 2 Function Dialing, AC).



Verified product identity



  • Brand: H3C

  • Model / SKU: H3CUS106C-PV2

  • Product code (MPN): 9801A832

  • Series: H3C Aolynk Product

  • Product type: Ethernet Switch

  • Configuration: Fixed Ethernet Switch

  • Condition on listing: Original New

  • Ordering role: Main SKU


Current supplier listing for configuration and availability: H3C H3CUS106C-PV2.



What the listing actually asserts



  • H3C H3CUS106C-PV2 Ethernet Switch. H3C US106C-P V2 Ethernet Switch (6FE, Iron Shell, PoE 65W, 2 Function Dialing, AC).

  • Product Type: Ethernet Switch

  • Series: H3C Aolynk Product

  • Configuration: Fixed Ethernet Switch

  • Product Code: 9801A832

  • Condition: Original New

  • Model: H3CUS106C-PV2

  • Description: H3C US106C-P V2 Ethernet Switch (6FE, Iron Shell, PoE 65W, 2 Function Dialing, AC)


Anything not listed above—throughput tables, MAC scale, exact PoE watts, dimensions, noise, or software feature matrices—should be treated as unconfirmed for this article. Prefer to re-open the live product page when the project needs those fields.




Additional product-page detail


Resources Company Open cart Home / H3C / H3C Aolynk Product / H3C H3CUS106C-PV2 Ethernet Switch Brand H3C N/A Verified H3C H3CUS106C-PV2 Ethernet Switch Model (MPN) 9801A832 SKU H3CUS106C-PV2 Condition Factory Sealed Original Packaging (NIB) Out of Stock H3C H3CUS106C-PV2 Ethernet Switch. H3C US106C-P V2 Ethernet Switch (6FE, Iron Shell, PoE 65W, 2 Function Dialing, AC).


Get Global Discount Need configuration help? Our CCIE certified engineers can help you verify compatibility.


Secure Payment VISA Pay WIRE Fast Dispatch Global logistics network aiming for same-day handover.


H3C H3CUS106C-PV2 Ethernet Switch is H3C US106C-P V2 Ethernet Switch (6FE, Iron Shell, PoE 65W, 2 Function Dialing, AC).



Role fit and architecture notes



Based on the listed product class, buyers typically evaluate this SKU for:



  • Access or aggregation roles where the printed port layout matches closet density

  • PoE edge designs only when PoE is explicitly present in the verified text

  • Copper-first designs unless uplinks are confirmed elsewhere on the page

  • Rollouts that need a stable, orderable SKU string across multiple sites


PoE/PoE+ appears in the verified product text. Before freezing the BOM, map expected endpoint classes (AP, camera, phone, IoT) to the switch’s PoE capability, cable length, and power budget. If the page does not print a watt budget, treat budget as unconfirmed and obtain it from your internal design package before you rely on high-density PoE.


Port layout on the listing: see product page port listing. If uplinks are not explicit, do not invent QSFP/SFP counts—confirm on the live page before design sign-off.



Port, power, and cabling decision tree


Use this sequence before you approve quantities:



  1. Copy the exact model string and product code into the design BOM and the purchase requisition side by side.

  2. Count copper and optical interfaces against day-1 endpoints plus a documented growth reserve (for example 20–30% empty ports in dense closets).

  3. Decide media: Cat5e/Cat6/Cat6A for multi-gig copper; OS2/OM3/OM4 and approved optics for fiber uplinks.

  4. Power path: AC is mentioned on the listing—align PDU type, cordage, and dual-supply policy with site standards.

  5. Thermal and depth: reserve blanking panels and airflow direction consistency even when the page omits exact BTU numbers.

  6. Management path: out-of-band Ethernet or console access should be drawn on the rack elevation before install day.



Configuration questions procurement should force engineering to answer



  • Is the ordered string exactly H3CUS106C-PV2 / 9801A832, with no missing -P/-HP/-E/-QA suffix from a sibling SKU?

  • Which features are mandatory on day-1 versus nice-to-have, and which of those are actually evidenced on the product page?

  • What is the uplink handoff speed and media to the next layer, and who owns the optic BOM?

  • Are licenses, support years, or maintenance phrases embedded in the product name already priced into the line item?

  • What is the RMA and spares strategy: cold spare per site, or N+1 for multi-closet campuses?

  • Who validates firmware baseline and golden config before the change window?



Deployment and rollout narrative


A low-risk rollout for H3C H3CUS106C-PV2 looks less like “unbox and patch” and more like a short controlled project:



  1. Lab or pilot: stage one unit with the same cabling plant and uplink type planned for production. Capture boot time, default management address behavior, and any first-login prompts.

  2. Image and config: store a baseline configuration template versioned in your repository. Avoid hand-built snowflake units across sites.

  3. Physical install: label front ports and rear power feeds; photograph serial labels for the CMDB on the same day as racking.

  4. Link validation: verify every uplink, LAG/MLAG if used, and PoE negotiation for the first bank of endpoints before declaring success.

  5. Cutover: schedule during the agreed change window with a rollback that re-homes endpoints to the previous edge device or temporary switch.

  6. Hypercare: watch error counters, power draw, and user tickets for 48–72 hours; only then close the change.



Buying checklist (copy into the ticket)



  • Exact model and product code recorded in BOM and PO

  • Live product page re-checked for the wording that justified the buy

  • Port math signed by network design owner

  • Power, rack unit, and airflow constraints signed by data-hall / closet owner

  • Optics / DAC / AOC list attached when SFP or multi-rate uplinks are in play

  • Support / RMA path and serial capture process defined

  • Pilot quantity vs full rollout quantity decided with dates

  • Firmware and baseline config ownership named




Product-page Q&A worth capturing in the RFQ



  • What is the Model specification for H3CUS106C-PV2? H3CUS106C-PV2 lists Model as H3CUS106C-PV2. Use this value when checking product materials requirements, quotation details, and deployment compatibility.

  • What is the Product Code specification for H3CUS106C-PV2? H3CUS106C-PV2 lists Product Code as 9801A832. Use this value when checking product materials requirements, quotation details, and deployment compatibility.

  • What is the Product Type specification for H3CUS106C-PV2? H3CUS106C-PV2 lists Product Type as Ethernet Switch. Use this value when checking product materials requirements, quotation details, and deployment compatibility.

  • What is the Series specification for H3CUS106C-PV2? H3CUS106C-PV2 lists Series as H3C Aolynk Product. Use this value when checking product materials requirements, quotation details, and deployment compatibility.



How to use the product page during negotiation


Keep the conversation anchored to the same SKU everyone can open: H3C H3CUS106C-PV2. When a quote uses a slightly different model string, stop and reconcile before price discussions continue. Ask suppliers to quote model + product code together, to state condition (Original New), and to confirm whether accessories implied by the description are included or sold separately.


For multi-site buys, freeze one golden line item and replicate it. Mixing near-sibling SKUs across buildings is a common source of asymmetric PoE, uplink, or licensing behavior that only appears after install.



Risk register specific to this SKU class



  • Identity risk: long model names and CMCTO-style strings get truncated in ERP fields—preserve the full code.

  • Assumption risk: series reputation is not a substitute for the port map on this page.

  • Lead-time risk: if availability moves, re-validate that the replacement SKU is not a different power or uplink profile.

  • Integration risk: management tooling, AAA, and telemetry agents should be tested on the pilot unit.

  • Documentation risk: if installers only receive a price list line, they will guess; attach this checklist to the work order.



Summary


H3C H3CUS106C-PV2 is a good candidate only when the verified identity and interface story match the design you intend to operate for the next hardware cycle. Use the linked product page as the shared source for model string, product code, and description text; keep unlisted performance claims out of the purchase justification until they are confirmed by your own design package. Order deliberately, pilot once, then scale the same SKU.