Overview

NX‑OS Release 16.0(7) provides updates for Nexus 9000 Series switches operating in ACI Mode.
This release works only on Nexus 9000 Series switches in ACI Mode and includes supported hardware, open issues, and resolved issues.
It corresponds to APIC Release 6.0(7).


Supported Hardware

Product ID Description
N9K-C9408 9408 modular chassis switch
N9K-C9504 9504 chassis
N9K-C9508 9508 chassis
N9K-C9508-B1 9508 chassis bundle with supervisor, PSUs, controllers, fan trays, and fabric modules
N9K-C9508-B2 9508 chassis bundle with supervisor, PSUs, controllers, fan trays, and fabric modules
N9K-C9516 9516 chassis
N9K-X9400-8D 8‑port 400G QSFP‑DD line card
N9K-X9400-16W 16‑port 200G line card
N9K-X9716D-GX 16×400G QSFP line card
N9K-X9736C-FX 36×40/100G Cloud Scale line card
N9K-X9736Q-FX 36×40G Cloud Scale line card
N9K-X9732C-EX 32×40/100G Cloud Scale line card
N9K-C9504-FM-G 9504 400G capable fabric module
N9K-C9508-FM-G 9508 400G capable fabric module
N9K-C9504-FM-E 9504 cloud scale fabric module
N9K-C9508-FM-E 9508 cloud scale fabric module
N9K-C9508-FM-E2 9508 enhanced cloud scale fabric module
N9K-C9516-FM-E2 9516 enhanced cloud scale fabric module
N9K-C9504-FAN2 9504 4‑slot fan tray (Gen 2)
N9K-C9504-FAN Fan tray for 9504 chassis
N9K-C9508-FAN2 9508 8‑slot fan tray (Gen 2)
N9K-C9508-FAN Fan tray for 9508 chassis
N9K-C9516-FAN Fan tray for 9516 chassis
N9K-SUP-A+ Supervisor module
N9K-SUP-B+ Supervisor module
N9K-SUP-A Supervisor module
N9K-SUP-B Supervisor module
N9K-SC-A System controller
N9K-C9364D-GX2A 64×400/100G QSFP‑DD + 2×1/10 SFP+ ports
N9K-C9348D-GX2A 48×400/100G QSFP‑DD + 2×1/10 SFP+ ports
N9K-C9332D-GX2B 32×400/100G QSFP‑DD + 2×1/10 SFP+ ports
N9K-C93600CD-GX 28×10/40/100 + 8×10/40/100/400G ports

Open Issues

Bug ID Description
CSCwn63197 BUM traffic on a specific leaf is not functioning properly due to route calculation impact.
CSCwm66473 Diagnostic failure displayed for RTC‑TEST on certain leaf models.
CSCwh97938 Incorrect fan identification displayed for some fan units.
CSCvg85886 ARP glean requests mis‑generated for isolated EPG endpoints.
CSCvw89840 vPC TEP multicast and unknown unicast traffic dropped when pod redundancy triggers.
CSCvy31805 Bypass action destination group not programmed correctly in some service graphs.
CSCwc61780 N9K‑C9408 ASIC SFP+ ports not supported on certain supervisor cards.
CSCwd89607 Rogue detection or loop control may incorrectly disable bridge domain learning.
CSCwf45328 BGP process core after deleting/restoring an SR‑MPLS infra L3Out node profile.
CSCwf74167 Endpoint does not receive DHCP response when First‑Hop Security (FHS) is enabled.
CSCwf80004 SSH connection fails after upgrade from earlier releases.
CSCwf93802 Traffic loss due to endpoint not syncing between leafs.
CSCwh15088 Auto‑negotiation link up failures on certain GX2 ports.
CSCwj94677 Auto‑negotiation not working with certain line‑card expansion modules.
CSCwk32573 Fault F1820 raised due to insufficient storage space.
CSCwo73679 Unsupported line‑card insertion can cause switch crash.
CSCwp13198 Delay in DAC cable link up observed with some NICs.
CSCwk38032 SPAN session remains in failed state.

Resolved Issues

Bug ID Description Fixed In
CSCwh39489 High memory utilization on modular spine supervisors addressed. 16.0(7e)
CSCwj51461 Host connectivity loss with Proxy‑ARP and microsegmentation resolved. 16.0(7e)
CSCwj87708 Traffic forwarding to wrong service leaf in active/standby policies fixed. 16.0(7e)
CSCwk47025 Incorrect SNMP OID values for certain switches corrected. 16.0(7e)

If needed, visit https://itmall.sale/