170620_MA7_内装工事開始

MA7_pjが上棟し、内装工事が始まっております。都心の一等地に建つ、地下1階、地上3階建のRC造共同住宅です。

内部の型枠が外され、外壁側に吹き付けによる断熱工事が施されます。吹き付け断熱は、施工後吹き付けた厚みを確認する事が出来ないため、写真のような20mmのプラスチックピンをさして、躯体に当たらないかを検査します。施工誤差を考慮し、25mm厚で吹き付けている為、欠損は皆無です。

tuna

MA7_pj performs laying the roof, and interior decoration construction begins.It is an apartment house made with the first floor built in the excellent location of the downtown area under the ground, concrete of 3 stories above the ground.

An internal form is taken off, and insulation construction by the blowing is given the outer wall side. Because the blowing insulation cannot identify the thickness that blew it after construction, I let you do a plastic pin of 20mm such as the photograph and inspect it whether you do not hit a skeleton. Because I blow it with 25mm thickness in consideration of a construction error, there is no loss.

tuna