At present, many professions are using graphite crucibles. There are many types of graphite crucibles, and the types of crucibles used in different occupations will be different. Today, the molten aluminum crucibles that china-graphiteelectrode.com say are the ones that sell very much in graphite crucibles. Graphite crucible needs to pay attention to protection and maintenance in daily use. Let's take a look at its protection and maintenance methods.
Aluminum alloy graphite crucible protection and maintenance methods:
1. Melt-aluminum graphite crucibles can't use too much force when we are feeding, and can't put a lot of them at one time to prevent the material from colliding with the inner wall of the crucible to destroy the graphite crucible.
2. If the molten aluminum graphite is not used after a period of time, it is necessary to arrange the remaining materials at the bottom of the molten aluminum graphite crucible to avoid the condensation of the bottom material at the time of the next application. If it is heated up, it will affect its service life. However, if the 24 hours of continuous use of molten aluminum graphite crucible will not reduce its service life, it will extend its service life.
3. When dissolving the dissolving aid in the molten aluminum graphite crucible, it must be in an appropriate amount. Excessive solvent will damage the inner wall of the graphite crucible.
4. Regularly carry out the inspection and finishing of the molten aluminum graphite crucible, usually in about two months.