show ethernet-switching global-information
 Global Mode           : Transparent bridge

set system root-authentication plain-text-password
root123  route123


■Mode  flow based → packet based

★packet basedで動作確認できていない
 スタティックルート入れてもルーティングテーブルへ反映されない
 ★packet basedでset security policies が入らない

root> show security flow status
  Flow forwarding mode:
    Inet forwarding mode: flow based
    Inet6 forwarding mode: drop
    MPLS forwarding mode: drop
    ISO forwarding mode: drop
  Flow trace status
    Flow tracing status: off
  Flow session distribution
    Distribution mode: RR-based
  Flow ipsec performance acceleration: off
  Flow packet ordering
    Ordering mode: Hardware

delete security
set security forwarding-options family mpls mode packet-based
set security forwarding-options family iso mode packet-based
set security forwarding-options family inet6 mode packet-based

root> show security flow status
  Flow forwarding mode:
    Inet forwarding mode: packet based
    Inet6 forwarding mode: packet based
    MPLS forwarding mode: packet based
    ISO forwarding mode: packet based
  Flow trace status
    Flow tracing status: off
  Flow session distribution
    Distribution mode: RR-based
  Flow ipsec performance acceleration: off
  Flow packet ordering
    Ordering mode: Hardware

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


■Interface

ge-0/0/1
ge-0/0/2
ge-0/0/3
ge-0/0/4
ge-0/0/5


◆routed

set interfaces lo0 unit 0 family inet address 192.168.5.5/32
set interfaces fe-0/0/0 unit 0 family inet address 192.168.0.254/24
*seconday上書きされない
 set interfaces fe-0/0/0 unit 0 family inet address 172.16.0.254/24

◆Acccess
set interfaces ge-0/0/3 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/3 unit 0 family ethernet-switching vlan members vlan100 

set interfaces ge-0/0/2 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members vlan100


◆Trunk
方法1
set interfaces ge-0/0/5 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/5 unit 0 family ethernet-switching vlan members vlan100
set interfaces ge-0/0/5 unit 0 family ethernet-switching vlan members vlan110
set interfaces ge-0/0/5 unit 0 family ethernet-switching native-vlan-id vlan120

sh vlan detail 

方法2 ★vSRX
set interfaces ge-0/0/0 vlan-tagging
set interfaces ge-0/0/0 unit 0 vlan-id 10
set interfaces ge-0/0/0 unit 0 family inet address 192.168.10.254/24
set interfaces ge-0/0/0 unit 1 vlan-id 20
set interfaces ge-0/0/0 unit 1 family inet address 192.168.20.254/24




◆その他設定

Sppped duplex filter

set interfaces fe-0/0/0 speed 100m
set interfaces fe-0/0/0 link-mode full-duplex
set interfaces fe-0/0/0 fastether-options source-filtering
set interfaces fe-0/0/0 fastether-options source-address-filter 00:00:00:11:22:33

set interfaces ge-0/0/1 ether-options auto-negotiation

※上書き削除

rename interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24 to address 10.2.2.2/24
delete interfaces fe-0/0/0 unit 0 family inet address 192.168.0.254/24



★CiscoCatalystと接続時
対向機器がCatalystスイッチで「PVST+」または「rapid-PVST+」が動作している場合、802.1d BPDUは
 VLAN1宛てに送信されるため、Juniper EX側のTrunkポートのNative VLANを1に設定する必要があります。

set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


◆VLAN

set vlans vlan100 vlan-id 100
set vlans vlan100 filter input TEST

set interfaces irb unit 100 family inet filter output f1

set interface ge-0/0/1 unit 0 family inet filter input from_CENTSV02
set firewall filter TEST  ※ SRX設定不可

set firewall family inet filter TEST term Allow-PC from source-address 10.1.1.1/32
set firewall family inet filter TEST term Allow-PC then accept

set firewall family inet filter TEST term Allow-PING from protocol icmp
set firewall family inet filter TEST term Allow-PING then accept

set firewall family ethernet-switching filter ingress-port-filter term TEST2 from source-address 192.0.2.14

set firewall family ethernet-switching filter ingress-port-filter interface-specific



◆SVI
VSRX ではethernetswitching使えない L2TranparentModeのみ

Instead of doing switching trunk, just change ge-0/0/1 to a vlan-tagged interface with IPs defined directly
 on the logical units:

set interfaces ge-0/0/1 vlan-tagging
set interfaces ge-0/0/1.10 vlan-id 10
set interfaces ge-0/0/1.10 family inet address 10.10.10.1/24
set security zones security-zones trust interface ge-0/0/1.10
 ...and remember to delete the vlans and irb interfaces 





IRB 可能な時ブリッジ、必要な時ルーティング 拡張L2SoftWareサポート時の名称 ないときはRVI

set interfaces irb unit 100 family inet address 192.0.0.1/24
set vlans vlan110 vlan-id 110
set vlans vlan100 l3-interface irb.100

RVI(Routed VLAN Interface)は、特定のVLANにルーティング機能を提供する論理L3インターフェース

set interfaces vlan unit 100 family inet address 11.1.1.1/24
set vlans vlan100 vlan-id 100
set vlans vlan100 l3-interface vlan.100


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

■LinkAggregation

●static
 スイッチに設定するLAGの数を定義( 設定例:1つ )
 set chassis aggregated-devices ethernet device-count 1
 LAGの作成( 設定例:L2アクセスポートとして ae0 の作成 )
 set interfaces ae0 unit 0 family ethernet-switching
 LAGに参加させる既存のインターフェースの設定の削除( 設定例:ge-0/0/1とge-0/0/2 )
 delete interfaces ge-0/0/1 unit 0
 delete interfaces ge-0/0/2 unit 0
 LAGに参加させるインターフェースの設定( 設定例:ge-0/0/1とge-0/0/2 )
 set interfaces ge-0/0/2 ether-options 802.3ad ae0
 set interfaces ge-0/0/4 gigether-options 802.3ad ae0
 set interfaces ge-0/0/5 gigether-options 802.3ad ae0
  LAGポートの設定( 設定例:ae0のLAGをアクセスポートとしてVLAN10を割り当て )
 set interfaces ae0 unit 0 family ethernet-switching port-mode access
 set interfaces ae0 unit 0 family ethernet-switching vlan members vlan100

 LAGインターフェースを、全てのVLANトラフィックを転送するL2トランクポートする場合の設定は以下のように設定
  set interfaces ae0 unit 0 family ethernet-switching port-mode trunk vlan members all


●LACP
 LACPとして設定する場合、上記のStatic Link Aggregationの設定に加えて次の設定を追加するだけです。
 LACPの有効化

  set interfaces ae0 aggregated-ether-options lacp active
  set interfaces ae0 aggregated-ether-options lacp periodic fast




;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


■ACL

●適用
set vlans vlan100 filter input TEST

set interfaces irb unit 110 family inet filter output TEST

set interface ge-0/0/1 unit 0 family inet filter input TEST

vSRX設定不可‘packet`base
 set firewall family ethernet-switching filter ingress-port-filter interface-specific

●フィルタ作成


set firewall filter TEST  ※ SRX設定不可

set firewall family inet filter TEST term Allow-PC from source-address 10.1.1.1/32
set firewall family inet filter TEST term Allow-PC then accept

set firewall family inet filter TEST term Allow-PING from protocol icmp
set firewall family inet filter TEST term Allow-PING then accept

set firewall family ethernet-switching filter ingress-port-filter term TEST from source-address 192.0.2.14


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Routing

JUNOSのベストルートの選択基準は以下のとおりです。つまり、Cisco IOSと同じ動作となります。

 ① ロンゲストマッチ  ②★ ルートプレファレンス(Administrative Distance)  ③ メトリック

Directly Connected    0
  Local    0
  Static    5
  RSVP-signaled LSPs    7
  LDP-signaled LSPps    9
  OSPF internal    10
  IS-IS Level 1 internal    15
  IS-IS Level 2 internal    18
  Redirects    30
  Router discovery    55
  RIP    100
  RIPng    100
  DVMRP    110
  Aggregate    130
  OSPF AS external    150
  IS-IS Level 1 external    160
  IS-IS Level 2 external    165
  BGP (internal and external)    170
  MSDP    175

Cisco IOSの場合は、AD値が低い値の方だ表示されますが、JUNOSの場合はこのように
 表示上はローカルプレファレンス値に関係なく全て表示
 アスタリスク * のマーキングされたスタティックルートに従ってパケットが転送される
 Forwarding Tableではベストパスだけが表示されます。

LB
  set policy-options policy-statement LB from route-filter 192.168.2.0/24 exact
  set policy-options policy-statement LB then load-balance per-packet

JUNOSにおけるルーティングポリシー
 ルーティング情報のフローを制御すること
 ルート情報のaccept、reject、ルートのアトリビュートのmodifyのために使用
 ルーティングポリシーの「term」という単位は、「from」で定義された条件と「then」で定義されたアクションで構成
 termでは、条件定義なし(from定義なし)でthenアクションだけを実行することも可能
 UNOSのfromとthenは、CiscoでいうRoute-mapのsetとmatchコマンドに該当

fromコマンド    説明
 area     OSPFのエリアID
 as-path     ASパスの正規表現
 community     BGPコミュニティ値
 external     外部ルート
 interface     インターフェース名
 local-preference     ローカルプリファレンス
 metric     metric値
 neighbor     ネイバールータ
 next-hop     ネクストホップのルータ
 next-hop-type     ネクストホップタイプ
 origin     ORIGINアトリビュート
 policy     ポリシー名
 preference     ルートプリファレンス値
 prefix-list     プレフィックスリスト
 protocol     ルート情報を学習したプロトコル
 route-filter     合致するルート情報
 route-type     ルートタイプ
 tag     tag値

・ Terminating actions
合致アクション    説明
accept    許可する
reject    破棄する

 ・ Flow control
合致アクション    説明
next term    次のtermに進む
next policy    次のポリシーに進む

 ・ Modifying attributes
合致アクションの例    説明
as-path-prepend    AS_PATH 値のmodify
local-preference    LOCAL_PREF値のmodify

デフォルトポリシーとは

 ルーティングポリシーで定義した全てのtermに合致しない場合、デフォルトポリシーが最後に適用

プロトコル    デフォルトポリシー(Import)    デフォルトポリシー(Export)
RIP     全てのRIPルートを受信する       全てのRIPルートを送信しない

OSPF 全てのOSPFルートを受信する  フラッディングを使用して、ローカルルートと通知
                  されたルートを通知する。他のプロトコルから通知
                  されたルートをLSDBに追加するには、exportでの
                  ポリシーを定義する必要がある。

BGP     全てのBGPルートを受信する    アクティブなBGPルートを受け入れてエクスポートする

ルート情報をフィルタリングすることができます。
 以下のコマンドはルーティングポリシーの設定の from route-filter の条件定義の際に使用されます。

 ・ exact ・ orlonger  ・ longer  ・ upto 


<router-filterを使用>

 set policy-options policy-statement POUTE-FILTER01 term 1 from route-filter 1.1.1.1/32 exact
 set policy-options policy-statement POUTE-FILTER01 term 1 then accept
 set policy-options policy-statement POUTE-FILTER01 term 2 then reject

 set protocols bgp group EXT neighbor 10.0.0.1 import POUTE-FILTER01

`< prefix-list>
 set policy-options prefix-list PRE01 1.1.1.1/32
 set policy-options policy-statement PRE-FILTER01 term 1 from prefix-list PRE01
 set policy-options policy-statement PRE-FILTER01 term 1 then accept
 set policy-options policy-statement PRE-FILTER01 term 2 then reject

 set protocols bgp group EXT neighbor 10.0.0.1 import PRE-FILTER01


EBGPネイバー「10.0.0.1」から「1.1.1.1/32」のルート情報のみを受信

 root@R2# set policy-options prefix-list PRE01 1.1.1.1/32
 root@R2# set policy-options policy-statement PRE-FILTER01 term 1 from prefix-list PRE01
 root@R2# set policy-options policy-statement PRE-FILTER01 term 1 then accept
 root@R2# set policy-options policy-statement PRE-FILTER01 term 2 then reject

 root@R2# set protocols bgp group EXT neighbor 10.0.0.1 import PRE-FILTER01
 
isco IOSでいう「network」コマンドによるアドバタイズと同じです。

 ◆ EBGPネイバーへ自身のAS内で発生させる「 1.0.0.0/8 」のルート情報をアドバタイズ

 root@R1# set policy-options prefix-list AS10ROUTE 1.0.0.0/8

 root@R1# set policy-options policy-statement ADV-ROUTE01 term 1 from prefix-list AS10ROUTE
 root@R1# set policy-options policy-statement ADV-ROUTE01 term 1 then accept

 root@R1# set protocols bgp group EXT export ADV-ROUTE01
 
 EBGPネイバーの「2.1.1.254」に「1.0.0.0/8」をアドバタイズする際にAS番号「10」をプリペンドしてアドバタイズ

 root@R1# set policy-options prefix-list AS10ROUTE 1.0.0.0/8
 root@R1# set policy-options policy-statement ASPRE01 term 1 from prefix-list AS10ROUTE
 root@R1# set policy-options policy-statement ASPRE01 term 1 then as-path-prepend 10
 root@R1# set policy-options policy-statement ASPRE01 term 1 then accept

 root@R1# set protocols bgp group EXT neighbor 2.1.1.254 export ASPRE01




■Routing static


 set routing-options static route 10.1.1.0/24 next-hop 172.16.0.254
 set routing-options static route 10.1.1.0/24 next-hop 172.16.0.254  
 set routing-options static route 0.0.0.0/0 next-hop 172.16.1.254 



■Routing OSPF


 set protocols ospf area 0.0.0.0 interface ge-0/0/0
 set protocols ospf area 0.0.0.0 interface ge-0/0/1

 set protocols ospf area 0.0.0.0 interface ge-0/0/0.0
 set protocols ospf area 0.0.0.0 interface ge-0/0/1.0

 set protocols ospf area 0.0.0.0 interface all
 set protocols ospf area 0.0.0.0 interface ge-0/0/2 disable

passive
 set protocols ospf area 0.0.0.0 interface lo0 passive
 set protocols ospf area 0.0.0.0 interface ge-0/0/1 passive

 show route
show ospf database
show ospf neighbor

●ルータID
 set routing-options router-id 1.1.1.1

●コスト変更
 ① インターフェースのコスト変更 コスト値は 10 加算
 set protocols ospf area 0.0.0.0 interface fe-0/0/1 metric 10

 ② インターフェースの帯域の変更(メトリック上の帯域の変更)
  set interface fe-0/0/1 unit 0 bandwidth 10m

 ③ Reference Bandwidthコマンドによる計算式の変更
  set protocols ospf reference-bandwidth 1G
●priority 変更
 set protocols ospf area 0.0.0.0 interface ge-0/0/0 priority 255
●HelloInterval
 set protocols ospf area 0.0.0.5 interface ge-0/0/0 hello-interval 5


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


■VR



set routing-instances VR1 instance-type virtual-router
set routing-instances VR2 instance-type virtual-router

set routing-instances VR1 interface ge-0/0/1.0
set routing-instances VR1 interface irb.110

set routing-instances VR1 routing-options instance-import import-from-VR2
set routing-instances VR2 routing-options instance-import import-from-VR1

set policy-options policy-statement import-from-VR1 term 1 from instance VR1
set policy-options policy-statement import-from-VR1 term 1 then accept
set policy-options policy-statement import-from-VR2 term 1 from instance VR2
set policy-options policy-statement import-from-VR2 term 1 then accept

   from route-filter   from prefix-list     from interface


show route instance VR1


■IF Ping許可
set security zones security-zone OUTSIDE interfaces ge-0/0/1.0 host-inbound-traffic system-services ping
set security zones security-zone INSIDE interfaces ge-0/0/2.0 host-inbound-traffic system-services ping

set security policies from-zone INSIDE to-zone OUTSIDE policy 1 match source-address any
set security policies from-zone INSIDE to-zone OUTSIDE policy 1 match destination-address any
set security policies from-zone INSIDE to-zone OUTSIDE policy 1 match application any
set security policies from-zone INSIDE to-zone OUTSIDE policy 1 then permit
set security policies from-zone OUTSIDE to-zone INSIDE policy 2 match source-address any
set security policies from-zone OUTSIDE to-zone INSIDE policy 2 match destination-address any
set security policies from-zone OUTSIDE to-zone INSIDE policy 2 match application any
set security policies from-zone OUTSIDE to-zone INSIDE policy 2 then permit

routhing connected なら不要


■IF Ping許可


■IDS
set security zones security-zone untrust screen untrust-screen

set security screen ids-option untrust-screen icmp ping-death
set security screen ids-option untrust-screen ip source-route-option
set security screen ids-option untrust-screen ip tear-drop
set security screen ids-option untrust-screen tcp syn-flood alarm-threshold 1024
set security screen ids-option untrust-screen tcp syn-flood attack-threshold 200
set security screen ids-option untrust-screen tcp syn-flood source-threshold 1024
set security screen ids-option untrust-screen tcp syn-flood destination-threshold 2048
set security screen ids-option untrust-screen tcp syn-flood queue-size 2000
set security screen ids-option untrust-screen tcp syn-flood timeout 20
set security screen ids-option untrust-screen tcp land


------------------

edit]
root# show | display set
set version 12.1X47-D15.4
set chassis aggregated-devices ethernet device-count 3
set interfaces ge-0/0/0 vlan-tagging
set interfaces ge-0/0/0 unit 0 vlan-id 10
set interfaces ge-0/0/0 unit 0 family inet address 192.168.10.254/24
set interfaces ge-0/0/0 unit 1 vlan-id 20
set interfaces ge-0/0/0 unit 1 family inet address 192.168.20.254/24
set interfaces ge-0/0/1 unit 0 family inet
set interfaces ge-0/0/2 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members vlan110
set interfaces ge-0/0/3 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/3 unit 0 family ethernet-switching vlan members vlan100
set interfaces ge-0/0/4 gigether-options 802.3ad ae0
set interfaces ge-0/0/5 gigether-options 802.3ad ae0
set interfaces ae0 aggregated-ether-options lacp active
set interfaces ae0 aggregated-ether-options lacp periodic fast
set interfaces ae0 unit 0 family ethernet-switching port-mode access
set interfaces ae0 unit 0 family ethernet-switching vlan members vlan100
set interfaces ae0 unit 0 family ethernet-switching vlan members vlan110
set interfaces irb unit 110 family inet filter output TEST
set interfaces irb unit 110 family inet address 192.0.2.1/25
set routing-options static route 10.1.1.0/24 next-hop 172.16.0.254
set routing-options static route 0.0.0.0/0 next-hop 172.16.1.254
set routing-options static route 10.1.2.0/24 next-hop 172.16.0.254
set security forwarding-options family inet6 mode packet-based
set security forwarding-options family mpls mode packet-based
set security forwarding-options family iso mode packet-based
set firewall family inet filter TEST term Allow-PING from protocol icmp
set firewall family inet filter TEST term Allow-PING then accept
set firewall family inet filter TEST term Allow-PC from source-address 10.1.1.1/32
set firewall family inet filter TEST term Allow-PC then accept
set vlans vlan100 filter input TEST
set vlans vlan110 vlan-id 110
set vlans vlan110 l3-interface irb.110

[edit]




set interfaces ge-0/0/3 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/3 unit 0 family ethernet-switching vlan members vlan100 
set interfaces ge0/0/4 unit 0 family ethernrt-switching port-mode access
set interfaces ge-0/0/4 unit 0 family ethernet-switching vlan members vlan100
set interfaces ge-7/0/5 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-7/0/5 unit 0 family ethernet-switching vlan members vlan100
set interfaces vlan unit 100 family inet address 11.1.1.1/24
set vlans vlan100 vlan-id 100
set vlans vlan100 l3-interface vlan.100

-----------------------

set interfaces xe-0/0/4  unit 0 description “Sales server port” 
set interfaces xe-0/0/4 unit 0 family ethernet-switching vlan members blue
set interfaces xe-0/0/6 unit 0 description “Sales wireless access point port”
set interfaces xe-0/0/6 unit 0 family ethernet-switching vlan members blue
set interfaces xe-0/0/0  unit 0 description “Support servers”
set interfaces xe-0/0/0 unit 0 family ethernet-switching vlan members red
set interfaces xe-0/0/2 unit 0 description “Support wireless access point port”



set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members vlan110

set interfaces irb unit 110 family inet address 192.0.2.1/25 

set vlans vlan110 l3-interface irb.110
set vlans vlan110 vlan-id 110


root> show configuration | display set
set version 12.1X47-D15.4
set system autoinstallation delete-upon-commit
set system autoinstallation traceoptions level verbose
set system autoinstallation traceoptions flag all
set system services ssh
set system services web-management http interface ge-0/0/0.0
set system syslog user * any emergency
set system syslog file messages any any
set system syslog file messages authorization info
set system syslog file interactive-commands interactive-commands any
set system license autoupdate url https://ae1.juniper.net/junos/key_retrieval
set interfaces ge-0/0/0 unit 0
set security screen ids-option untrust-screen icmp ping-death
set security screen ids-option untrust-screen ip source-route-option
set security screen ids-option untrust-screen ip tear-drop
set security screen ids-option untrust-screen tcp syn-flood alarm-threshold 1024
set security screen ids-option untrust-screen tcp syn-flood attack-threshold 200
set security screen ids-option untrust-screen tcp syn-flood source-threshold 1024
set security screen ids-option untrust-screen tcp syn-flood destination-threshold 2048
set security screen ids-option untrust-screen tcp syn-flood queue-size 2000
set security screen ids-option untrust-screen tcp syn-flood timeout 20
set security screen ids-option untrust-screen tcp land
set security policies from-zone trust to-zone trust policy default-permit match source-address any
set security policies from-zone trust to-zone trust policy default-permit match destination-address any
set security policies from-zone trust to-zone trust policy default-permit match application any
set security policies from-zone trust to-zone trust policy default-permit then permit
set security policies from-zone trust to-zone untrust policy default-permit match source-address any
set security policies from-zone trust to-zone untrust policy default-permit match destination-address any
set security policies from-zone trust to-zone untrust policy default-permit match application any
set security policies from-zone trust to-zone untrust policy default-permit then permit
set security policies from-zone untrust to-zone trust policy default-deny match source-address any
set security policies from-zone untrust to-zone trust policy default-deny match destination-address any
set security policies from-zone untrust to-zone trust policy default-deny match application any
set security policies from-zone untrust to-zone trust policy default-deny then deny
set security zones security-zone trust tcp-rst
set security zones security-zone untrust screen untrust-screen
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services http
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services https
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services ssh
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services telnet
set security zones security-zone untrust interfaces ge-0/0/0.0 host-inbound-traffic system-services dhcp


--------------------------



初期アクセス
show
管理系
基本動作

トラフィック処理

  Mode  Router Flow

 



Interface

  vlan 
  Trunk
  Po LinkAggregation
  SVI RVI BVI
tunnel
Brige 
RSTP
Static Route
BGP
OSPF
RoutingForwardingTable
VR VRF
Redistribution
ACL
QoS

SNMP
DNS
hostname
DHCP
LLDP
Timezone

MTU MSS

AAA Radius

Syslog

VRRP
ProxyArp
PBR

NTP

VIP IPpool
SSL

BackUP


IP SLA tracking







VRX

ZONE
policy
NAT
PPPOE
HA
IPsecVPN

MPLS
VxLAN
QoS
L2security