Place the finger behind the 5th fret of the 2nd string to get the pitch of the 1st string. (E). You can prove you have this ability to tell one sound from another by listening to sounds without looking where they come from. (For electric guitars can place it on the pickup). Learning to tune your guitar is learning a new way of using your hearing. You'll mistake the difference in quality as a difference in pitch.A better source is a tuning fork. The steps involved in tuning your guitar: The first step is to tune one string to a note from another source. For example when playing the first string open and the second string at the fifth fret, you may notice that the first string may sound 'crisper', while the second string will sound a little "darker" in quality. The very first thing you need to know is that learning to tune your guitar takes time. (D)3. The darker quality of the string at first can be misunderstood to sound lower in pitch.
When the string sounds close to the fork make smaller turns.A tuning fork is a U shaped piece of metal with a stem on it. You do this by finding the correct tuning gear for this string and then turning the gear slowly in one direction or the other.Some things on guitar can be learned in minutes, some in days, and others in weeks, but tuning will sometimes take even longer, because you have to train your ears. If we were to play the same pitch, at the same volume, for the same length of time on piano, clarinet, flute, violin, guitar, doorbell, or car horn, your ear could tell one instrument (or car horn) from another because of the tone quality.1. After about half a turn you should hear the string change pitch either up or down. This will tell you which way you have to turn the gear to tighten the string (to raise the pitch) and which way to loosen the string (to lower the pitch).When you think the first string is in tune, use the following steps (one to five) to tune the rest of the strings. The quality of the pitch will differ between two strings, and this may at first confuse your ear.
The following steps repeat the process of matching one pitch with another. (G)4. Place the finger behind the FOURTH FRET of the 3rd string to get the pitch of the 2nd string. (You may use different words to explain how the strings sound to you, but the idea is that the tone quality of each string will sound different).6 stamped on the stem). Place the finger behind the 5th fret of the 5th string to get the pitch of the 4th string. Volume is how loud it is.1. You could use another guitar (one that has already been tuned), a piano, or somebody that know how to tune could guide you along. Place the finger behind the 5th fret of the 4th string to get the pitch of the 3rd string. If results come slowly or don't seem to be making any progress, don't be discouraged, just keep working at it. Tone quality is the "character" of the sound.If the string is lower than the tuning fork, tighten the string to raise the pitch.The point I want to emphasize is that you already hear very well.3. That's because each instrument has a different "character" or "personality" of sound. If the string is higher than the tuning fork, loosen the string to lower the pitch. This will give you the tone of the 5th sting. You can get one that gives you the pitch of the first string on the guitar. The difference is that instead of using a tuning fork you will listen to the string you have just tuned, and try to match the next string to this one. Turn about a quarter of a turn and then compare the string to the tuning fork again. With practice, you can become a better tuner). (A)2.
The fork is designed to vibrate at a particular pitch. You'll probably have to repeat this process several times.4. You should hear the note which the vibrating fork produced. If, for example you learn to tune to a piano, you're going to have a problem if ever you need to tune and there's no piano handy).To use the tuning fork you hold it by the stem, tap the U shaped fork against something solid, and place the stem (not the tip of the fork) on either the body, or the bridge of your guitar.You now adjust the first string to match the pitch of the tuning fork. (You'll have to strike them both again). Do not turn the gear rapidly.Now compare the sound of the string with the sound of the tuning fork. (Remember, you can only tune as well as your ears hear now. (It's better because you don't need anybody else around or any other instrument. Place the finger behind the fifth fret of the 6th string. (B)5. (Look for one that has the letter E and the number 329. Your ear hears four things in each sound: Pitch, Duration, Volume and Tone Quality.Go slowly.Pitch is how high or low the sound is.The next thing to know is that when you are tuning your guitar you want to listen only to the pitch of the strings. The note is the correct "source". If you understand that the ear hears a combination of pitch, volume, duration and quality all at the same time, it will help you to filter out the quality from the pitch and overcome the basic problem of tuning. Duration is how long it lasts. It will help you to know that the ear is a very skilled instrument for taking in sound