LED: Cree XP-G Cool White (color temperature 6100-6500 K)
User Selectable Modes: 3 (High, Medium and Low).
Each mode can be configured to one of the two sub-levels.
User Selectable Modes: 3 (High, Medium and Low).
Each mode can be configured to one of the two sub-levels.
Light Output and Runtimes
High: H1 270 Lm (2 hrs) or H2 140 Lm (4.1 hrs)
Medium: M1 38 Lm (25 hrs) or M2 10.5 Lm (72 hrs)
Low: L1 2.3 Lm (10.5 days) or L2 0.18 Lm (41 days)
Light output are Out The Front (OTF) values.
High: H1 270 Lm (2 hrs) or H2 140 Lm (4.1 hrs)
Medium: M1 38 Lm (25 hrs) or M2 10.5 Lm (72 hrs)
Low: L1 2.3 Lm (10.5 days) or L2 0.18 Lm (41 days)
Light output are Out The Front (OTF) values.
Battery: One 18650 size (up to 67mm long) 3.7V Li-ion battery.
Batteries are not included in the pacakge.
Parasitic Drain: 4.5 years
Batteries are not included in the pacakge.
Parasitic Drain: 4.5 years
Beam Type
80° spill beam spread
11° (3.8 feet at 20 feet) hot spot
80° spill beam spread
11° (3.8 feet at 20 feet) hot spot
Dimensions
Diameter: 1 inch (25.4 mm)
Length: 4 inch (100 mm)
Weight
1.8 oz (50 g) excluding battery
Diameter: 1 inch (25.4 mm)
Length: 4 inch (100 mm)
Weight
1.8 oz (50 g) excluding battery
Features
Builtin over discharge protection circuit (2.7V cutoff voltage)
Electronic soft-touch switch, with a 200,000 cycle operating life
Smart user interface provides fast and easy access to all brightness levels
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
Proprietary heat sinking design that bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 95% of the surface area.
Durable natural hard anodized finish (Type III Class I)
SCHOTT ultra clear lens with anti-reflection coatings on both sides
Bezel down clip (pre-installed)
Orange peel textured reflector
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (1 meter 30 minutes)
Builtin over discharge protection circuit (2.7V cutoff voltage)
Electronic soft-touch switch, with a 200,000 cycle operating life
Smart user interface provides fast and easy access to all brightness levels
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
Proprietary heat sinking design that bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 95% of the surface area.
Durable natural hard anodized finish (Type III Class I)
SCHOTT ultra clear lens with anti-reflection coatings on both sides
Bezel down clip (pre-installed)
Orange peel textured reflector
Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (1 meter 30 minutes)
Operations
From Off
Short click turns on the light to High instantly. Click again quickly to cycle from High to Medium, and Low.
Press and hold to cycle through Low, Medium and High, release to set.
When On
Short click turns off the light.
Press and hold to cycle from Low to High, release to set. The light always cycle from Low to High regardless which level you are currently in.
Double click at any level to toggle and select between the two sub-levels for that level. Medium and Low selections are memorized after the light is turned off and through battery changes.
From Off
Short click turns on the light to High instantly. Click again quickly to cycle from High to Medium, and Low.
Press and hold to cycle through Low, Medium and High, release to set.
When On
Short click turns off the light.
Press and hold to cycle from Low to High, release to set. The light always cycle from Low to High regardless which level you are currently in.
Double click at any level to toggle and select between the two sub-levels for that level. Medium and Low selections are memorized after the light is turned off and through battery changes.
SC50 と SC60 です
まさに兄弟ですね (^_^;)
SC50 はコンパクトが売りで、SC60 は大容量バッテリーを使用可能なところがポイントですね。
