Engine turbocharger pressure due to imports than naturally aspirated engine with a higher compression ratio, so that the body withstand higher work intensity. All of these have decided the supercharged engine internal components to withstand higher temperatures and greater impact, compression and shear forces, so the selection of imported cars booster motor oil when it is necessary to take into account the special resistance, oil used must be good abrasion resistance, high temperature lubricant film can be quickly established, high film strength and stability. The only high-quality synthetic oil in order to meet this requirement,Auto Performance Parts it is best to use the original oil in addition to the provisions of foreign oil must use full synthetic motor oil of high quality lubricants.In simple terms, the import is the use of the exhaust turbocharger exhaust pipe pushing into the gas turbine to improve in order to increase the engine power and torque, low-emission high power to achieve the purpose.Turbocharger Kits Is known, the engine is by fuel combustion in the cylinder acting to generate power, since the amount of fuel input by the in-cylinder intake air amount restriction, so the power generated by the engine will be limited, if the engine is running at optimum performance state, and then increase the output power can be increased only by the amount of fuel into the compressed air cylinder more, thereby improving combustion acting ability . Therefore, under the current technical conditions, the import is only turbocharger can increase the output power of the engine to work efficiently under constant mechanical devices.Relative to the turbine engine so many outstanding advantages , it can be as simple as a core component of the pump . The exhaust gas discharged from the engine to the drive wheel side of the turbocharger , the more it will turn faster when the impeller speed up the other side also synchronized , increasing the amount of intake air into the combustion chamber . Although simple in principle but in practice it is very complex and sophisticated , not only the internal parts of the tight fit , even with the engine turbocharger tight match , otherwise it will reduce engine efficiency and even cause damage.