Good morning!
I have made running video #3
There have been changes to suspension.
My friend Mr. Inazuman-San shared a video with me from "ReveD"
ReveD video shared valuable information for suspension settings!!
with this knowledge,
create shock tower extension!
the dampers are too short for my chassis.
Heavy pre-load was required to maintain ride height.
by moving the position of the damper,
there is now ride height with 0 pre-load.
Front
Rear
*please see video for movement*
Also,
progress has been made on the Volvo 740 body shell!
This is my first time making a body..I am slow at it
From my last blog: "body is too high, needs to be lower"
it is low
there was a lot of material to remove😅
Over-fender is custom self-made, 10mm+
Do you like it?
Finally...
in the video,
front desk still seems unresponsive.
too much grip? too much slip?
front desk suspension still needs improvement.
I will try 1 change at a time and study the result.
-install new tires
-scrape chassis for more A-arm movement
-loosen lower end ball cap +2mm
-use softer front spring
-remove 200k silicone oil in diff
-adjust camber angle
current tire is too thin, and tread pattern is gone.
1 more run and they will burst!!
remove old,
add new
I will make another video with more improvements
Thank you for enjoying my blog
