NetApp の認定を取得してスキルアップすると、最も強力な NetApp 製品とソリューションを管理するための資格を得ることができます.社会人にとって、普段は試験の準備や集中した勉強時間をなかなか作れませんですが、KILLTEST模擬試験のおかげで無駄なく3ヶ月でしっかりと準備することができ、NS0-153試験を7個も合格することができました！その内なんと2つは満点合格でした！自分でも信じられません！NS0-153問題集は本場の試験と限りなく近い内容にびっくりです。豊富な解釈付きで分かりやすく、完璧に近い効果も実感できました。KILLTESTのNS0-153問題集精度が高くて、一回で試験を通すように助けます。本当に頼りできるのNS0-153問題集です。
これからNS0-153無料問題集皆と分かち合います
1.If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the
storage appliance and do a restart for the changes to take effect.
A.True
B.False
Correct:A
2.If the client is a CIFS client, locks are __________.
A.advisory
B.mandatory
C.ordered
D.optional
Correct:B
3.To view per client NFS statistics on the storage appliance, options nfs.per_client_stats.enable
must be turned on.
A.True
B.False
Correct:A
4.Three methods of creating a LUN are: *lun setup *lun map *FilerView
A.True
B.False
Correct:A
5.Applications, such as databases, running on NAS or iSCSI or FC SAN must be
__________________.
A.prepared for snapshots by flushing buffers to disk and momentarily suspending activity.
B.disconnected from their storage resources during the snapshot.
C.using dynamic multipathing during a backup.
D.mirrored with a host-based volume manager to be backed-up.
Correct:A
6.To export volumes and directories automatically on reboot, include them in the /etc/exports file.
A.True
B.False
Correct:A
7.Using the output below, a co-worker determined that these are type "Solaris" LUNs. What would
your determination be? lun show -m LUN pathMapped to LUN ID
--------------------------------------------------- /vol/vol1/lun0 solaris-igroup0 0 /vol/vol1/lun1 solaris-igroup1
0 /vol/vol1/qtree1/lun2 solaris-igroup2 0 /vol/vol1/qtree1/lun3 solaris-igroup3 0
A.These are type "Solaris" LUNs.
B.These are NFS LUNs, but the exact OS cannot be determined.
C.Not enough information is given here. Run the lun show -v command to get the information requested.
D.Not enough information is given here. Run the lun map command to get the information requested.
Correct:C
8.Which one of the following will enable "symlink_strict_security"?
A.options cifs.symlink_strict_security on
B.cifs shares -change -symlink_strict_security
C.options symlink_strict_security=true
D.options symlink_strict_security=on
Correct:B
9.To configure a storage system as a member of an active directory, the time on the storage
system must be synchronized with the time on the Domain Controller.
A.True
B.False
Correct:A
10.The writeable snapshot that is created for a LUN clone depends on ___________.
A.mirroring.
B.the snapshot taken at the time the clone was created.
C.exclusive access to the volume.
D.the data in the original LUN not changing.
Correct:B
11.Which command is the most appropriate for troubleshooting a multiprotocol authentication
problem?
A.wcc
B.rdfile /etc/rc
C.priv set advanced
D.sysstat 1
Correct:A
Apple 認定試験は世界共通の国際認定制度で中立公正に判定する試験です。それにApple 認定も世界最大技術者受験者数を有します。だから9L0-619認定試験は世界ですごく人気があって、皆さんは9L0-619
認証を取得するためにたくさんの精力と努力を払っていました、でもそれだけじゃ、9L0-619を簡単に取るわけないじゃ、一つのいい学習資料もとても重要である。私かKILLTESTの9L0-619問題集
を紹介します。次は9L0-619の部分問題で、皆さんの勉強に役に立てばいい。
1. Which statement best defines the term "bundle" as it applies to the Mac OS X v10.5 file system?
A. A folder that is invisible in the Finder
B. A folder of files that the Finder displays as a single file
C. A folder of files that have been gathered and organized for deployment
D. A hierarchical directory structure containing resources geared for a specific purpose
Answer: D
2. Which command-line tool can display the ID of a specific installation package?
A. pkgs
B. pkgutil
C. swupdate
D. packagemaker
Answer: B
3. In Mac OS X v10.5, which tool do you use to restore a multicasted image to a target volume?
A. asr
B. hdiutil
C. diskutil
D. Disk Utility
E. System Image Utility
Answer: A
4. Your organization has 100 Intel iMac computers. You are creating a NetInstall image on a Mac OS X
Server v10.5 computer. Which Automator action should you add if you want to specify that the finished
image can be accessed only by a specific subset of your iMac computers?
A. Define Image Source
B. Filter Computer Models
C. Filter Clients by IP Address
D. Customize Package Selection
E. Filter Clients by MAC Address
F. Apply System Configuration Settings
Answer: E
5. A Mac OS X Server v10.5 computer has the MAC address 0020114dbcef,the serial number
ABCD1234XYZ, and the IP address 10.0.0.4, which resolves to myserver.Apple.com. Which file will Mac
OS X Server use to automatically configure the computer?
A. 10.0.4.plist
B. ABCD12.plist
C. myserver.plist
D. 0020114d.plist
Answer: C
6. What is the main difference between a sparse bundle disk image and a sparse disk image?
A. The image data in a sparse bundle disk image is stored in single file, but the image data in a sparse
disk image is stored in multiple files.
B. The image data in a sparse bundle disk image is stored in multiple files, while the image data in a
sparse disk image is stored in a single file.
C. A sparse bundle disk image must be formatted as an HFS volume, while a sparse disk image may use
any format available for a Mac OS X volume.
D. As more files are added to a sparse bundle disk image, its file size increases, unlike a sparse disk
image, whose file size remains static as files are added.
Answer: B
7. As an Apple Certified System Administrator in Apple.com, what should you do to synchronize the local
Software Update service catalog with Apple's public Software Update servers?
A. You should use command-line tool swupd
B. You should use command-line tool swsvrd
C. You should use command-line tool swupd_syncd
D. You should use command-line tool swsvrd_updated
Answer: C
1. Which statement best defines the term "bundle" as it applies to the Mac OS X v10.5 file system?
A. A folder that is invisible in the Finder
B. A folder of files that the Finder displays as a single file
C. A folder of files that have been gathered and organized for deployment
D. A hierarchical directory structure containing resources geared for a specific purpose
Answer: D
2. Which command-line tool can display the ID of a specific installation package?
A. pkgs
B. pkgutil
C. swupdate
D. packagemaker
Answer: B
3. In Mac OS X v10.5, which tool do you use to restore a multicasted image to a target volume?
A. asr
B. hdiutil
C. diskutil
D. Disk Utility
E. System Image Utility
Answer: A
4. Your organization has 100 Intel iMac computers. You are creating a NetInstall image on a Mac OS X
Server v10.5 computer. Which Automator action should you add if you want to specify that the finished
image can be accessed only by a specific subset of your iMac computers?
A. Define Image Source
B. Filter Computer Models
C. Filter Clients by IP Address
D. Customize Package Selection
E. Filter Clients by MAC Address
F. Apply System Configuration Settings
Answer: E
5. A Mac OS X Server v10.5 computer has the MAC address 0020114dbcef,the serial number
ABCD1234XYZ, and the IP address 10.0.0.4, which resolves to myserver.Apple.com. Which file will Mac
OS X Server use to automatically configure the computer?
A. 10.0.4.plist
B. ABCD12.plist
C. myserver.plist
D. 0020114d.plist
Answer: C
6. What is the main difference between a sparse bundle disk image and a sparse disk image?
A. The image data in a sparse bundle disk image is stored in single file, but the image data in a sparse
disk image is stored in multiple files.
B. The image data in a sparse bundle disk image is stored in multiple files, while the image data in a
sparse disk image is stored in a single file.
C. A sparse bundle disk image must be formatted as an HFS volume, while a sparse disk image may use
any format available for a Mac OS X volume.
D. As more files are added to a sparse bundle disk image, its file size increases, unlike a sparse disk
image, whose file size remains static as files are added.
Answer: B
7. As an Apple Certified System Administrator in Apple.com, what should you do to synchronize the local
Software Update service catalog with Apple's public Software Update servers?
A. You should use command-line tool swupd
B. You should use command-line tool swsvrd
C. You should use command-line tool swupd_syncd
D. You should use command-line tool swsvrd_updated
Answer: C
KILLTEST最近多くの科目は更新しました、詳しい情報はKILLTEST本ームページにご参考してください。今日皆さんにお勧めしたいのは050-710科目です、Novell Other Certification 技術者認定制度は、複数の製品分野の認定資格を取得することによって、より高度な専門技術者としての証となります。それに応じて050-710試験の難度もますます高くなって、KILLTESTの050-710模擬試験問題集は更新ばかりされて、すごく人気があります、この050-710問題集が申し分のない学習資料と思います、精度が高くて、何よりこの050-710問題集は合格することを保証して、万が一不合格になる場合全額返済します。
1. Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
2. In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:
3. Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
4. Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
5. As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
6. You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
7. You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
8. What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C
1. Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
2. In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:
3. Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
4. Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
5. As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
6. You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
7. You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
8. What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C