Has your furnace stopped working? These top 5 heating system issues and their simple solutions might assist to get it working.
Having problem with your furnace? You're not alone. Thankfully, many issues have easy DIY repairs. The first action: Check whether your A/C system has power. You don't wish to have a service tech come to your house simply to turn a switch at the breaker box. If power isn't the problem, examine other possible problems prior to calling for service.
# 1 PROBLEM: Thermostat isn't working.
LIKELY CULPRIT: If your heat isn't beginning at all, try altering the batteries in the thermostat, if it has batteries. While you're at it, offer the thermostat an excellent cleaning inside with a little paintbrush.
You can likewise try to reboot it. With the thermostat set to Heat, turn the temperature level down to about 60º. Then, turn the breaker turn off for 30 seconds and turn it back furnace company calgary on Still absolutely nothing? Employ an expert.
# 2 PROBLEM: Unit not turning on.
LIKELY OFFENDER: Check the emergency situation shutoff switch for the heating system. It might be at the entrance to the heating system closet, at the top of the basement stairs, or on the heating system. It may have a red switch plate. if somebody changed it off, the heater will not work.
# 3 PROBLEM: Dirty filter
MOST LIKELY PERPETRATOR: Not switching out an old filter can trigger a host of problems, not to point out increasing your energy bill. To guarantee your furnace doesn't work overtime, change your filter each to 2 months. Here's how: Switch off your furnace, discover the filter, get rid of the old one (and remember of the size), change it and turn the heater back on.
# 4 PROBLEM: Heating system isn't firing up
LIKELY OFFENDER: Does your heating system click as though it will turn on, however then go quiet and never ever begin? If you have actually examined the power, inspected the thermostat and altered the filter, the pilot light or the ignition sensor is most likely the problem. To repair it, begin by shutting off the gas to your heater. Then remove the front panel and discover the igniter or ignition sensing unit, which is usually near the burners. Snap a picture of the sensing unit to remind you of how it's attached and then remove the ignition sensing unit. Rub it with steel wool to eliminate residue, bewaring to not harm it. Then put it back exactly as you discovered it and change the panel prior to turning the gas back on. If you have any hesitation about this task, play it safe and contact the pros.
# 5 ISSUE: Heating system keeps tripping the breaker
MOST LIKELY OFFENDER: If your heating system keeps tripping the breaker or blowing the fuse when the heat begins, it's most likely an electrical problem. To keep you and your family safe, hire the pros to diagnose the cause.
While lots of typical heater problems can be repaired without calling in the professionals, it is very important to have your furnace expertly serviced once a year, specifically if you're not comfortable performing some of the required upkeep jobs yourself.