Behringer DCX2496 Ultradrive Pro Digital 24-Bit/96 kHz Loudspeaker Management System & Crossover The Ultradrive Pro DCX2496 is an indispensable tool for the precise set-up of multiple loudspeaker systems or arrays. Quick Start Tips for Behringer DCX2496 from BESL. Be sure to copy the latest DCX-remote program from the BESL CD-ROM to your. BESL DCX quick setup tips.
ESSB Hi Fi Setup Using the Behringer DEQ-2496 Mastering Processor The new Behringer DEQ-2496 is a multipurpose 'Mastering' processor that gives excellent control over vocal dynamics and EQ tailoring. I might point out that this processor may not be for everyone.
DCX2496 PC remote. Behringer: ULTRADRIVE PRO DCX2496 Apps Editor Software Remote. Apr 27, 2007 Is anyone using the remote control software with a DCX2496? I don't see any minimum specs for the PC. The one time I looked at the software, it worked well and didn't seem to mind being on a very slow laptop.
Remote Software Purdue
If you are a casual operator not needing any intense or surgical type processing, the 2496 will probably be overkill for you, even though you could still benefit from it. However, if you need the ultimate in EQ and dynamic processing for Mid-Fi to Hi-Fi SSB and/or AM audio, then the DEQ2496 is a jewel for the price. The menu system is very rich and takes a little time to master. This page was developed to assist in initial setup of the 2496. I hope that it is not too painful of an experience. I tried to keep it as organized as possible. Power On and Software Version Check The first thing we should do is check the software version of the 2496.
Remoting Software
This is done by pressing the 'UTILITY' button. The version is reported in the upper right hand corner of the display window. Version 1.4 is the latest software revision by Behringer and includes a few bug fixes as well as a few more variable functions. If your version is below this, consider and used to transfer the software information from your computer to the 2496. Instructions on how update the 2496 via a midi transfer is available on the ' section on the bottom of this page. The DEQ2496 may come loaded with version 1.2b or 1.3 which will still work just fine if you do not want to upgrade.
Menus and Setup The main menus are accessed by pressing one of the 9 buttons on the right side of the 2496. First, you should set the rear-panel ' MAX' switch to a level of +22 dBu. (Level buttons pressed 'IN') This establishes an extra +10dBu of maximum gain capability and will allow a little more 'headroom' for signal peaks.
UTILITY Menu Pages 1, 2 & 3 Pressing the UTILITY button will display one of three 'PAGES' of menus. Select Page 1 (GENERAL SETUP) by pressing the 'PAGE' button just to the top-left of the main display. Adjust the contrast of the display by first selecting CONTRAST by rotating the small top knob marked PUSH / TURN. A little arrow to the left of the display will move as you rotate the knob. Once the arrow is pointing to CONTRAST, change it's value by turning the big knob.