launch creader v Safety Precautions and Warnings:To prevent personal injury or damage to vehicles and/or the CreaderV, please read this instruction manual first carefully and observe the following safety precautions at a minimum whenever working on a vehicle:Always perform automotive testing in a safe environment.Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.Wear safety eye protection that meets ANSI standards.Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires nearby.Don't connect or disconnect any test equipment while the ignition is on or the engine is running.Keep the CreaderV dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the CreaderV, when necessary.source:http://www.obdchina.com/launch-c-reader-v-code-scan-tool-p-34.html
