ACC7100 Air Compressor with Cummins After-treatm

Recently, SmartGen ACC7100 diesel air compressor controller, national Ⅳ emission standard, with Cummins DPF regeneration logic, supports Cummins after-treatment function.

This controller adds self-check function before engine normal running. After starting, it enters self-check stage and the engine is running at idle speed; at this time, detect whether manual regeneration is required. If manual regeneration light is illuminated, the controller will give an alarm to show “please regenerate manually”. After the regeneration is active, the exhaust temperature high light will be illuminated, indicating normal regeneration. After the regeneration, engine comes to work normally. The customer’s field operation is smooth and the effect is good.

On-site Pictures


ACC7100 series diesel air compressor controller is used for air compressor with diesel-driven engine in order to realize functions of compressor start/stop, data measurement, maintenance, alarm protection and “three remotes”. It has speed regulator function, and CANBUS (SAE J1939) port, which can control various ECU or non-ECU diesel-driven air compressors. It also applies heated LCD and electronic components resistant to high and low temperature, which are suitable for extremely low or high temperature environments (-40°C~+70°C), so that controller can work reliably under the condition of extreme temperature.

ACC7100 series diesel air compressor controller applies 32-bit ARM micro-processor technology, which can realize functions of precise measurement for many parameters, set-point adjustment, timing and threshold setting etc. A majority of parameters can be adjusted from the control panel. All parameters can be adjusted and monitored on PC by RS485 or USB port. It can be widely used for diesel-driven air compressor control system with compact structure, simple wiring, and high reliability.

ACC7100A has higher protection level with IP60 and the front panel even reaches to IP65, which the rear housing is of fully sealed structure. The high level protection can effectively prevent dust and other substance from coming into the controller inside and prevent water seepage and condensation seeping into the controller cabinet. The reliable protection for the circuit board make the controller run stably and reliably. Therefore, it is more suitable for the field, mine, urban construction and other application scenarios with serious dust and complex working conditions.

SmartGen engine control module series products:

www.smartgen.cn

HAT600P Series ATS Controller Got UL Certificat

Recently, there are good news again for SmartGen ATS controller------HAT600P series has passed UL certification. As the professional version of HAT600N series, HAT600P series has further enhanced functions and configurations, which can be divided into the following 5 models. The main features comparison is as below:

Product Highlights:

1.Standard USB, RS485 port (HAT600PBI/PS also has ETHERNET port);
2.8-way output port, 1-way output port more than HAT600N series;
3.Wider AC supply range (LN90V~305V);
4.With NEL trip function;
5.With load voltage monitoring function;
6.With independent overcurrent warning or trip alarm function;
7.Can control 2 gensets to realize cycle run, master run and balanced time run;
8.Scheduled start;
9.With forced(fire) open input, fire linkage output function;
10.Record and display accumulated supply time, close times, active/reactive energy;
11.The wave distortion rate and 3-21 odd harmonic component percentage of voltage/current can be measured;
12.With auto and manual synchronous transfer function (only for HAT600PS);
13.Custom boot interface;
14.Black box function;
15.Installation dimension and wiring compatible with HAT600N series.

Product Back Panel

Typical Application Diagram

Product UL Certificates


At present, SmartGen’s products passed the UL certification include:
1.Genset Controller: HGM4000N series, HGM6100N series, HGM9500N series
2.Battery Charger: BAC06AU-12V、BAC06AU-24V
3.ATS Controller: HAT600P series.

More certified products in progress……

www.smartgen.cn

SmartGen丨Let's Run Towards 2021 With SmartGen!

We kick off the work at the eighth day of the lunar New Year!

On the first day of work, your really ideas:
Is my vacation over?
Are you going to work soon?
I didn't do anything?
My vacation is gone forever?

Everyone is offline and urgently needs a start-up gift to activate.

There is a new look at New Year, kick off of work needs a sense of ritual. It’s time for gift part~


We are all dreamers in the New Year.
Wish everyone has a wonderful beginning, promote to a higher position, safe and healthy.
Wish everyone pull together and work hard as a team to achieve greater brilliance.

www.smartgen.cn

Lean Improvement Project Competition of SmartGen

---Continuous improvement without limits


With the approaching of the New Year, we bid farewell to the special 2020 and welcome the hopeful 2021 with enthusiasm.

As the old year ends and the new year begins, the lean improvement of SmartGen is still on fire and vigorously blooms her vitality.

"The Lean Improvement Project Competition of SmartGen (Fifth Phase)" was held on the training room on the afternoon of Feb. 4th.


There are 8 projects in this competition. Compared to the previous four phases, the depth and breadth have been greatly improved. All five elements of management objectives QCDSM (Quality, Costing, Deadline, Safety, Morale) were involved.

Two winning projects are:

1. Shell seal improvement project of R&D Center: The material is changed from solid to liquid, and the production and assembly method is changed from manual to automatic, which improves the degree of automation, conforms to the characteristics of Industry 4.0 and applies the TRIZ theoretical knowledge. This project not only improves production efficiency, but also reduces costs while ensuring the quality.

2. Order placement timeliness improvement project of Production Center: By reorganizing and optimizing the physical flow and value flow, the timeliness of production order placement is greatly improved. This improvement will not only speed up the overall inventory turnover, but also ensure the delivery time of customers in a timely and fast manner.

The highlights and benefits of each improvement have injected vitality and power into the company’s continuous lean development.

General manager Cui Wenfeng and directors of each center participated as judges during the process and made wonderful and pertinent comments. After the presentation, Mr. Cui issued certificates of honor to the winners! Wow, there also came the red envelopes~~

Continuous lean is the only way to practice the company’s strategy. We have been firmly on the road to closely around the company’s values of “Innovation, Focus, Lean-Better” and continue to build the innovation and improvement culture of SmartGen! 

www.smartgen.cn