Five point harness is also called full body harness.
1. When using the full body harness every time, check the signage and certificate, check that the nylon has no cracks, whether the seam is secure, whether the metal parts are missing, cracks and rust, and the safety rope should be hung on the connecting ring. Used on.
2. Seat belts should be hung low and low, and prevent swinging, collision, avoiding sharp substances, and not touching open flames.
3. When using a long rope of 3 m or more, a buffer should be added, and if necessary, a buffer, a self-locking hook, and a speed difference type automatic controller can be used in combination.
4. Hook the hook and loop of the seat belt firmly on the mooring point during operation.
5. When using the seat belt in a low temperature environment, take care to prevent the seat belt from hardening.Or you can just buy full body harness here to prevent this happening.
6. Frequently used safety ropes should be visually inspected. When an abnormality occurs, the new rope should be replaced in time, and the problem of adding a rope sleeve should be noted.
7. The seat belt cannot be knotted to avoid the safety rope from being disconnected from the knot when the impact occurs. The safety hook should be hung on the connecting ring and cannot be hung directly on the safety rope to avoid the safety rope being cut when falling.
8. After two years of use of the seat belt, the sampling shall be carried out according to the quantity purchase. The fence shall be used for the static load test safety rope as the impact test. No rupture may continue to be used. The non-conforming product shall not be used continuously. The sampled safety rope shall be used. It must be re-used before use. Pay attention to the cord set when replacing the new rope.
9. Seat belts should be stored in a dry, ventilated warehouse. Do not touch high temperature, open flame, strong acid, strong alkali and sharp hard objects, and do not expose to the sun. Do not use hooked tools when moving, and prevent sun and rain during transportation.
10. The seat belt should be cleaned frequently. It can be gently rubbed in warm water with soapy water, then rinsed with water and then dried.
11. The various parts on the seat belt must not be removed arbitrarily. When replacing new parts, you should select qualified accessories.
12. The life of the seat belt is 3-5 years. If the abnormality is found, it should be scrapped in advance. During the use, please pay attention to the inspection and test it once every six months to one year. If the main part is not damaged, if it is found to be damaged and deteriorated, it will be reflected in time and stopped to ensure safe operation.