1. TX20 series gantry beam milling machine is a new generation of mechatronic products, suitable for high-speed steel, carbide cutting tools for a variety of metals, non-ferrous metals and non-metallic materials, parts of the processing. To complete the plane, the level of surface, inclined surface, side, slot, boring, drilling and other processes of milling process.
2. Table drive mode: a screw drive and screw drive two transmission methods. Configuration servo controller and servo motor drive, can realize stepless speed regulation, the servo motor can guarantee the output of constant torque effectively at low speed feeding, the servo motor can give full play to its high torque output when high speed feeding, guarantee different work pieces Processing needs.
3. Beam up and down movement and locking: TX20 series beams automatically move up and down and automatic locking device, the beam up and down movement and locking chain control, the beam will automatically delay the rise, to ensure the accuracy of the machine tool in use.
4. The machine is equipped with milling head and side milling head milling, milling head can be machined plane and groove, side milling head can be machined side plane and groove milling surface to be machined, side milling head are equipped with stepless speed regulation, Improve the processing of different requirements of the workpiece.
5. The basic parts of the machine are all cast, processed, assembled and cast by our company. The castings are all made of HT250 high quality cast iron. All of them are subjected to high temperature thermal aging treatment and secondary aging treatment with vibration aging to fully eliminate the internal stress of the casting. Bed, column, beam rail after all the audio-frequency quenching, rail hardness all over 50 degrees, to ensure the accuracy of the machine in use.
6. Machine guide rail protection: bed rails with 3mm steel shield, the support wheel for the copper wheel. Beam, column guide with organ (new material temperature) protective cover to prevent the process of processing the workpiece in the process of splashing iron fell on the rail surface scratch rail.
7. Machine lubrication system, the worktable guide rail with forced lubrication system to ensure long-term assurance accuracy of the guide rail, the other rail surface with electronic automatic timing quantitative lubrication.
8. According to user needs, can be customized special specifications, can be configured 3-4 power milling head.
| machine tool model | X2010 | X2013 | X2016 | X2020 | |||||
| The maximum processing length | mm | 2000-12000 | 2000-12000 | 3000-14000 | 3000-14000 | ||||
| The maximum processing width | mm | 1000 | 1300 | 1600 | 2000 | ||||
| The maximum processing height | mm | 800-1500 | 1000-1500 | 1000-1500 | 1000-2000 | ||||
| Workbench length | mm | 2000-10000 | 2000-10000 | 3000-12000 | 4000-16000 | ||||
| Workbench width | mm | 800 | 1000 | 1300 | 1600 | ||||
| Machine maximum load | T | 2000mm | 3T | 2000mm | 3T | 3000mm | 4T | 4000mm | 10T |
| 3000mm | 3T | 3000mm | 4T | 4000mm | 6T | 6000mm | 16T | ||
| 4000mm | 5T | 4000mm | 6T | 6000mm | 8T | 8000mm | 20T | ||
| 6000mm | 8T | 6000mm | 8T | 8000mm | 10T | 10000mm | 24T | ||
| 8000mm | 10T | 8000mm | 10T | 10000mm | 12T | 12000mm | 26T | ||
| 10000mm | 12T | 10000mm | 12T | 12000mm | 14T | 14000mm | 30T | ||
| Machine weight (about) | T | 2000mm | 8T | 2000mm | 9T | 3000mm | 16T | 4000mm | 22T |
| 3000mm | 13T | 3000mm | 14T | 4000mm | 18T | 6000mm | 33T | ||
| 4000mm | 15T | 4000mm | 16T | 6000mm | 22T | 8000mm | 42T | ||
| 6000mm | 22T | 6000mm | 23T | 8000mm | 32T | 10000mm | 52T | ||
| 8000mm | 28T | 8000mm | 30T | 10000mm | 38T | 12000mm | 62T | ||
| 10000mm | 35T | 10000mm | 36T | 12000mm | 42T | 14000mm | 72T | ||
| Workbench moving speed | mm/min | 30-3000 | |||||||
| Workbench motor | kw | 5.5-30 | |||||||
| Beam lifting speed | mm/min | 30-300 | |||||||
| Milling head about speed | mm/min | 30-1200 | |||||||
| Bore Milling head motor power | kw | April 15 | |||||||
| Bore Head milling trip | mm | 100-300 | |||||||
| Bore Milling head spindle taper | BT | 50 | |||||||
| Bore Milling head speed | |||||||||
| Bore Milling cutter head diameter | mm | 80-300 | |||||||
| Digital ruler（X Y Z） | set | 1 | |||||||
.
The machine tool milling head box body with all 20CrmonTiA gear material, after finishing the carburizing quenching and precision grinding, improve the accuracy of the same time reduce the noise, all the shaft 40Cr material after quenching and refining, improved Product life.
| V7 milling power head of the main technical parameters | |
| Equipped with motor power KW | 15 |
| Spindle related size (mm) | Cone degree=7:24，NO:50， |
| Recommended cutter diameter (mm) | MAX=200 |
| Spindle speed r / min | 6 levels 106、173、236、298、386、664 |
| Stroke effective stroke (mm) | 250 |
| Mop rotation angle | 30° |
1. protection class IP55, high protection will extend the service life.
2. Class F insulation insulation, insulation system to improve life expectancy.
3. the choice of high-quality grease, extending bearing life.
4. low speed constant torque output, output torque, long service life.
6 meters below the table using Taiwan's high-precision ball screw drive, high-speed vibration small, low-speed non-crawling, high positioning accuracy, servo drive performance; bearing capacity at the same time, cutting anti-vibration performance, can improve machine performance characteristics, improve machine tool The accuracy and precision of stability and machine tool life;
Servo reducer with high precision, torque, strong steel, long life, low noise and so on.
6 meters above the workbench with anti-gap tin bronze twin-screw drive, servo motor and gearbox directly linked to enhance the sensitivity and stability of the workbench, a reliable guarantee for the workbench running smoothly at high speed, low-speed movement Not crawling.
Equipment for a variety of milling head.
User in use
With my factory equipment Machinable various parts, the following is part of the components:
