In order to gain more and more customers on the decanter centrifuge market, the decanter centrifuge manufacturers should pay more attention to the production line and post service to promote the whole quality of their decanter centrifuges and their brand image. Therefore, there are some tips for the decanter centrifuge manufacturers.Now the kinds of polyurethane screen here for you.
The first tip for the decanter centrifuge manufacturers is to pay attention to the effects of the liquid to the centrifugal pump in strength and viscosity. And the density of the liquid will not be influenced by the decanter centrifuge pump. In addition, the change of the density of the liquid has nothing to do with the working efficiency of the decanter centrifuge. However, the axle power of the decanter centrifuge and the density of the liquid links to each other closely. And when the stickiness of the delivered liquid is higher than the water in room temperature, it is able to add to the power loss of the liquid inside of the decanter centrifuge pump, so as to reduce the flow and pressure of the decanter centrifuge pump and at the same time promote the axle power.Here to click sand pump and you can know more about this kind products.
The second tip for the decanter centrifuge manufacturers is the rotation speed of the decanter centrifuge. When the rotation speed of the decanter centrifuge pump changes, the flow and pressure of the decanter centrifuge pump will change in the same speed, changing the working efficiency as well as working power at the same time. However, if the liquid is not sticky enough, the change of the working efficiency of the decanter centrifuge is not obvious.If you want to get top qulity shear pump , what about take a look into it? If you want to know the character of stack sizer , see it this way!
The third tip for the decanter centrifuge manufacturers is to promote the impeller diameter of the decanter centrifuge. When fixed the rotation speed of the centrifugal pump, the flow and pressure of the pump will change according to the impeller diameter of the decanter centrifuge. Another tip for the decanter centrifuge manufacturers is the maintenance of the valve. The post service is always the top problems for most of the manufacturers. The unable to maintain the valve is able to cause breakdown of the decanter centrifuge. If the valve cannot be checked and carry out pressure test regularly, it is possible to causes accumulated impurity inside of the decanter centrifuge. And using material without oil resistance and pressure resistance performance is also easy to cause problems as well, so as to influence the brand image and quality of the decanter centrifuge. Therefore, it is necessary to invest more in the maintenance of the decanter centrifuge. And technology of the leakage proof should be improved by adding to the flange spaces and valve bar. In addition, some decanter centrifuge manufacturers even offer to lube the decanter centrifuge regularly and freely to attract the attention of customers.Here you may also interested in VSM shaker , right?