Maintenance of LED display techniques

LED display is a kind of commonly used commercial lighting lamps and lanterns, it can not only play the role of commercial lighting, but also can be used as advertising screen, because the LED display is generally used in outdoor, so if its not good maintenance, its service life will be greatly shortened, LED display and maintenance skills actually very simple, general mainly has the following several aspects.

1, maintain full color LED display screen using the environment humidity, don't let anything in the nature of moisture into your full-color LED display screen. With humidity, full-color display screens, electric, can lead to a full-color displays parts corrosion, causing permanent damage.
2, try to may harm the full-color display screen items away from the screen, and clean the screen also gently wipe as much as possible, to minimize the possibility of the damage.
3, full color LED display screen most close relationship with our customers, do a good job cleaning maintenance is very necessary. Long exposure to the outdoor environment in the wind, sunlight, dust and so on easy to dirty, for a period of time, must be a piece of dust on the screen, it needs cleaning in time to prevent the dust package surface effect the watch for a long time.
4, being stable power supply and grounding protection is good, the bad natural conditions, especially in strong thunder don't use under the weather.

5, screen it is forbidden to water in the body, such as iron powder easily conductive metal. LED display screen placed in low dust environment as far as possible, the dust will affect the display, at the same time the dust too much can cause damage to the circuit. If the water because of various reasons, please power off immediately and contact maintenance personnel, until the screen display board dry rear can use in the body.
6, pay attention to the switching sequence of LED display, are generally first open control computer to run normally and then open the LED display big screen, in the closure of the LED display, first to shut down the LED display screen, and then shut down the computer.
7 don't for a long time, played in full white, red, green, blue, etc all bright screen, so as not to cause too much electricity, the power cord fever is too large, LED lamp is damaged, affect the service life of the screen.

8, LED display screen should be regularly check whether the normal work, the line is damaged, if you don't work to change in time, the line has damage to timely repair or replacement.