358 mesh fence
There is a 358 mesh fence and its opening width is 76.2 mm and height is 12.7 mm.
358MF-01: 358 mesh fence has characteristic of small opening size for acting as a protector.
358 mesh fence is also called high security fence, 358 fence, anti-climbing fence, or anti-cutting fence. "358" refers to 3" × 0.5" opening size and 8 gauge wire diameter, which equates to 76.2 mm × 12.7 mm opening size and 4 mm wire diameter. 358 mesh fence is made from a type of strong welded mesh panel with small mesh opening. It is difficult to go through and to attack by using conventional human hand tools. The small mesh brings the anti-climbing and anti-cutting functions to 358 mesh fence. In most of occasions, the weight of 358 mesh fence is about three or four times of other types because the dense wires need much more material than others.
358 mesh panels specifications
Mesh aperture: 76.2 mm × 12.7 mm.
Wire diameter: 3 mm horizontal wire and 4 mm vertical wire.
Weld strength: range 540-690 N/m2.
Surface treatment: 358 mesh fence panels are made from high grade steel wire, then using PVC powder coating (Min. 100 micron), or PVC powder to paint.
Colors: Green RAL 6005, or Black RAL 9005.
358 fence posts specifications
Material: high grade steel for maximum strength and rigidity.
Post section:
Square post (SHS):
Size: 60 × 60 mm, 80 × 80 mm;
Thickness: 2.0/2.5/3.0 mm;
Height: 2.5/2.8/3.0/3.7 m.
Rectangle post (RHS):
Size: 60 × 80 mm;
Thickness: 2.0/2.5/3.0 mm;
Height:2.5/2.8/3.0/3.7 m.
C post (CHS):
Size: 60 × 80 mm;
Thickness: 2.0/2.5/3.0 mm;
Height:2.5/2.8/3.0/3.7 m.
Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron), finally marine coat for installations within 500 m of salt water or estuary.
Colors: Green RAL 6005, or Black RAL 9005.
Post cap: metal caps or plastic caps.
Metal clips and clamps are hot dip galvanised ,then powder coating in green or black color.
Table 1: 358 Mesh Fence Specifications
Item Fence Height
(m) Panel Size (Height × Width)
(mm) Fence Post (Height × Size × Thick)
(mm) Clamp Bar (Height × Width × Thick)
(mm) Interior or Corner Clamps Quantity
358MESH-01 2.0 2007 × 2515 2700 × 60 × 60 × 2.5 2007 × 60 × 5.0 7 or 14
358MESH-02 2.4 2400 × 2515 3100 × 60 × 60 × 2.5 2400 × 60 × 5.0 9 or 18
358MESH-03 3.0 2997 × 2515 3800 × 80 × 80 × 2.5 2997 × 80 × 6.0 11 or 22
358MESH-04 3.3 3302 × 2515 4200 × 80 × 80 × 2.5 3302 × 80 × 6.0 12 or 24
358MESH-05 3.6 3607 × 2515 4500 × 100 × 60 × 3.0 3607 × 100 × 7.0 13 or 26
358MESH-06 3.6 3607 × 2515 4500 × 100 × 100 × 3.0 3607 × 100 × 7.0 13 or 26
358MESH-07 4.2 4204 × 2515 5200 × 100 × 100 × 4.0 4204 × 100 × 8.0 15 or 30
358MESH-08 4.5 4496 × 2515 5500 × 100 × 100 × 5.0 4496 × 100 × 8.0 16 or 32
358MESH-09 5.2 5207 × 2515 6200 × 120 × 120 × 5.0 5207 × 100 × 8.0 18 or 36
NOTES:
Height: the height of the 358 mesh fence panel.
Width: the distance between two 358 mesh fence posts, they are measured from center to center.
Hot dipped galvanized: dip the fence into a container that is full of liquid zinc, and this way will prevent the 358 mesh fence from getting rusty.
Electric galvanized + polyester powder coated: electric galvanized (zinc coating 8–12 g) as a pre-surface treatment inside, polyester powder layer outside, and this way will prevent the 358 mesh fence from getting rusty, too.
358 mesh fence features
Anti-climbing. Smaller openings. Therefore, human's fingers and toes can't go through.
Anti-cutting. Robust wires and welded joints make it difficult for wire cutters and bolt cutters to cut.
High strength welded at each intersection.
Durability. 358 mesh fence, made from high quality steel wire and then galvanized or polymer powder coating, ensures a long service life.
Mesh fence is configured to provide maximum visibility, especially emergency and electronic detection systems need to use it.
Can be stepped to accommodate sloping ground.
Clamp bar fixings.
Custom designs available.
Versatility. Many different applications, such as schools, parks, leisure and recreational areas.
It is difficult for human's fingers or toes to go through the mesh opening of 358 mesh fence.
358MF-02: 358 mesh fence has a anti-climbing advantage.Pliers are twisting chain link fence off, but it is difficult to go through 358 mesh fence.
358MF-03: 358 mesh fence has a anti-cutting advantage.
Production process and Package
358 mesh fences are firstly welded by machine in the factory. Secondly, they will be galvanized or polymer powder coating for their high security and durability. Finally, they are packaged in plastic films and then stored and transported on wooden pallets. Each package is firmly attached to the pallets by a special tape.
358 mesh fence is welded each intersection by machine in the factory.
358MF-04: Accurate welded process can improve strong structure and high security of 358 mesh fence.This is a piece of 358 mesh fence with green polymer powder coating surface treatment.
358MF-05: Polymer powder coating surface treatment can improve anti-corrosion property of 358 mesh fence.
Every two panels has a piece of plastic film and a metal corner is fixed at corner of the panels.
358MF-06: Plastic film package can protect mesh fence from water or rain.Three metal pallets which are put in a container after 358 mesh fence is packed well.
358MF-07: Metal pallet package can protect mesh fence panels from external impact.
Installation of 358 mesh fence
Determine how tall your fence is. If the fence is 4 feet, the steel posts will need to be 6 feet. The posts will need to be at least 2 feet taller than your fence. When you install your fence, using the metal tails to pin up the wire to the post at the top, the middle and the bottom. Once the mesh panel is pinned up, pin up the next mesh panel. You should splice two mesh panels together.And then cover a plastic caps for posts to improve their anti-corrosion property. Especially, you should notice that when installing the 358 mesh fence, you should overlap 75 mm of two panels or overlap one opening distance to maintain integrity of protection.
Pin up the panel to the post at the top and the bottom and then cover a plastic cap at the post.
358MF-08: Installation tips of 358 mesh fence.
Application
As an anti-climbing and anti-cutting barrier, 358 mesh fence is designed with good welded character. Therefore, it has the characteristics of security and durability. It is ideally suitable for electronic alarm and detection systems, fencing in prisons, military sites, and airports, industrial and commercial properties, warehouses, power plants, offshore petrochemical facilities, seaport perimeter, laboratories, secure hospitals, schools, parks, leisure and recreational areas. 358 mesh fence will give them a long lasting and secure perimeter protection with attractive appearance. Generally, 3.60 m height fence is used in schools, parks, leisure and recreational areas, and 5.20 m height fence is widely used in prison and military establishments. In addition, if 358 mesh fence were added to razor wires, barbed wires and rota spikes, it would have higher security character. The main market of 358 mesh fence is in South Africa, United States and Nigeria. Most of the clients prefer hot dipped galvanized surface treatment.
358 mesh fence is installed outside the house.
358MF-09: 358 mesh fence is used to protect private property from being stolen to a great degree.358 mesh fence is installed in the parking lot.
358MF-10: 358 mesh fence is used in the parking lot to separate garden from parking lot.
2D security prison fence
2D mesh fence welded panels are made of two horizontal wires every 152.4 mm and 6 mm vertical wire.
358MF-11: Double horizontal wires mesh fence supplies higher strength and anti-cutting performance.
Introduction
2D Security Prison Fence with 4 mm double horizontal wires and 6 mm vertical wire for greater strength.
2D mesh panels have stronger security than 358 mesh fence because they have double horizontal wires every 152.4 mm. This structure makes the fence panel very rigid. At the same time, it has a higher level of strength and security than common 358 mesh fence. 2D security fence is widely used for schools, industrial sites, infrastructure, and high-security areas.
Green color power coating security mesh fence with 6 mm vertical wire and 4 mm double horizontal wires.
358MF-12: The details of 2D mesh fence.
2D security fencing specifications
Mesh opening: 76.2 mm × 12.7 mm welded at each intersection.
Horizontal wires: 4 mm diameter at 12.7 mm centres , and there are twelve single mesh wires between every 152.4 mm centres. In 2D mesh fence, 152.4 mm refers to the distance of every double horizontal wires.
Vertical wires: 6 mm diameter at 76.2 mm centres.
The post has a single row of M8 threaded inserts which allow the panels to be fitted with specialised pressed steel brackets and are pitched at 2.55 m centres.
Table 2: 2D Scrutiny Mesh Fencing Specifications
Item Fence Height
(m) Panel Size (Height × Width)
(mm) Fence Post (Height × Size × Thick)
(mm) Clamp Bar (Height × Width × Thick)
(mm) Interior or Corner Clamps Quantity
2D MESH-01 2.0 2007 × 2515 2700 × 60 × 60 × 2.5 2007 × 60 × 5.0 7 or 14
2D MESH-02 2.4 2400 × 2515 3100 × 60 × 60 × 2.5 2400 × 60 × 5.0 9 or 18
2D MESH-03 3.0 2997 × 2515 3800 × 80 × 80 × 2.5 2997 × 80 × 6.0 11 or 22
2D MESH-04 3.3 3302 × 2515 4200 × 80 × 80 × 2.5 3302 × 80 × 6.0 12 or 24
2D MESH-05 3.6 3607 × 2515 4500 × 100 × 60 × 3.0 3607 × 100 × 7.0 13 or 26
2D MESH-06 3.6 3607 × 2515 4500 × 100 × 100 × 3.0 3607 × 100 × 7.0 13 or 26
2D MESH-07 4.2 4204 × 2515 5200 × 100 × 100 × 4.0 4204 × 100 × 8.0 15 or 30
2D MESH-08 4.5 4496 × 2515 5500 × 100 × 100 × 5.0 4496 × 100 × 8.0 16 or 32
2D MESH-09 5.2 5207 × 2515 6200 × 120 × 120 × 5.0 5207 × 100 × 8.0 18 or 36
2D security mesh fence is installed with outside the luxury building.
358MF-13: 2D security prison mesh fence can protect public property within the luxury building.2D security mesh fence is used in the factory and separates two zones.
358MF-14: 2D security mesh fence is used in the factory for zones separation and security.
3D security mesh fence
3D security mesh fence is similar to 358 mesh fence, and they are both made from 4.0 mm wire in 12.7 × 76.2 mm mesh pattern. But 3D security fence enhances its appearance with pressed horizontal "V" shaped bending. It is a unique barrier solution which combines high level of safety and aesthetic appearance. Usually, 3D security fencing is recommended for schools, recreational areas, hospitals, railways, port, airport, warehouses and industrial facilities or commercial facilities. 3D galvanized welded mesh fence with metal posts achieves an integral rating of A in commercial, domestic, residential, healthy, industrial, educational aspects.
3D mesh fence has a
358MF-15: 3D mesh fence can supply higher security and aesthetic appearance.
Table 3: 3D Security Mesh Fencing Specifications
Panels Post
Item Fence Height Panel Size (Height × Width) Number of Beams Length Types and Fixings
Interior Corner
(m) (mm) (number) (mm) Types (mm) Fixings Types (mm) Fixings
3D MESH-01 2.0 2000 × 2515 2 2700 80 × 60× 2.0 RHS 6 80 ×80×2.5 SHS 12
3D MESH-02 2.4 2400 × 2515 3 3100 80 × 60× 2.0 RHS 7 80×80×2.5 SHS 14
3D MESH-03 3.0 3000 × 2515 3 3800 80 × 80× 2.5 SHS 10 80×80×2.5 SHS 20
While installing 358 fence, fixing clamp bar with post by bolt and overlapping an opening distance.
358MF-16: Clamp bars installation can fix adjacent two panels strongly.When installing 3D mesh fence, using bolt to link post and metal clips.
358MF-17: Metal clips installation can provide a reasonable level of security to any boundary.
3D mesh fence is installed outside the house.
358MF-18: 3D mesh fence is used outside the house for higher aesthetic appearance and security applications.3D mesh fence is installed as the security wall between road and grassland.
358MF-19: 3D mesh fence is used on the road for security and division.